Tibo PP100 User manual

1
TIBO PP100
Owner’s manual
www.tibo-electronics.com

2
Contents
What’s in the Box..........................................................................................................3
Important Safety Instructions........................................................................................4
Safety.......................................................................................................................................4
Warning....................................................................................................................................4
Identifying the Parts......................................................................................................5
Main Unit: Top View & Front View ...........................................................................................5
Rear View ................................................................................................................................5
Smart Remote Control .............................................................................................................5
Connections..................................................................................................................6
Connect to TV..........................................................................................................................6
Connect to an External Audio Device......................................................................................7
Connect Power ........................................................................................................................7
Basic Operations ..........................................................................................................8
Turn On/Off ..............................................................................................................................8
Adjust Volume Level ................................................................................................................8
Super Bass Boost ....................................................................................................................8
Mute Sound..............................................................................................................................8
Program Smart Remote Control to Control TV........................................................................8
Troubleshooting............................................................................................................9
Specications ...............................................................................................................9
www.tibo-electronics.com
2

3
What’s in the Box
Main Unit
Remote Control
(Only for SCART or RCA Connections)
3.5mm to 3.5mm Cable
(For TV Headphone Output)
Instruction Manual AC Power Cable

Design and specications are subject to change without notice.
3

4
Safety
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8 Do not install near any heat sources such
as radiators, heat registers, stoves, or other
 apparatus(includingampliers)thatproduce
heat.
9 Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
10 Unplug this apparatus during lightning storms
or when unused for long periods of time.
11 Referallservicingtoqualiedservice 
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
12 Unit shall not be exposed to dripping or
splashing.
13 Do not place any sources of danger on the
 apparatus(e.g.liquidlledobjects,lighted
candle).
14 The mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
15. Don’t put more than 30kg loading on top of
this apparatus.
Warning
1 Before operating this system, check the
voltage of this system to see if it is identical
with the voltage of your local power supply.
2Do not place this unit close to strong
 magneticeld.
3 If the system is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense on the
lens inside the player. Should this occur, the
system will not operate properly. Leave the
system turned on for about an hour until the
moisture evaporates.
4 Should any solid object or liquid fall into the
system, unplug the system and have it
 checkedbyqualiedpersonnelbefore
operating it any further.
5 Do not attempt to clean the unit with
chemical solvents as this might damage the
 nish.Useaclean,dryorslightlydampcloth.
6 When removing the power plug from the wall
outlet, always pull directly on the plug, never
yank on the cord.
Important Safety Instructions
4
www.tibo-electronics.com

5
Main Unit: Top View & Front View
1 /SOURCE
Select LINE IN 1 or LINE IN 2.
2 AUTO POWER Light
Indicate mode of auto power.
Red light: Standby mode.
Green light: play through LINE IN 1.
Yellow light: play through LINE IN 2.
3 + VOLUME -
Increase or decrease the volume
level.
4 Remote Control Sensor
Rear View
5 LINE IN Terminal
Connect to an external audio
device.
6 AC~
Connect to a power.
Smart Remote Control
1 ON/OFF
Turn on or turn off the unit.
2 LINE IN 1/LINE IN 2
Select LINE IN 1 or LINE IN 2.
3 Learning indication light.
4 LEARN
Activate learning mode to setup
commands from TV's remote
control, in order to control basic TV
functions.
5 MUTE
Mute or resume the sound of unit.
6 VOL+/VOL-
Increase or decrease the volume
level.
7 RS-BASS
Boost low end bass.
8 TV(Learning Zone)
You can store some functions of
TV in TV (learning zone) on smart
remote control.
Identifying the Parts
5

Connections
Connect to TV
This unit is very user friendly, please just connect it directly to TV’s headphone jack as
below :
1 Connect the LINE IN cable to:
- LINE IN socket on the unit.
- HEADPHONE socket on TV.
2 Unit turn on automatically. Press the /SOURCE button to select source.
3 Start to play on the TV.
Tip:
No need to use our Remote Control set, you can simply use your TV’s inherent
Remote Control set to control Vol+/Vol-.
6
www.tibo-electronics.com

Connect to an External Audio
Device
Connect the LINE IN cable to:
- LINE IN socket on the unit.
- HEADPHONE socket on an
external audio device.
Tip:
You can also use the Smart Remote
Control to adjust Vol+/Vol-.
Connect Power
Caution:
- Risk of product damage!
- Ensure that the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
Connect the AC power cord to:
- the AC ~ socket on this unit.
- the wall socket.
7

8
Turn On/Off
When you connect TV or an
external device to the unit, unit will
turn on automatically. Auto Power
indication light is green (connect
to LINE IN 1) or yellow (connect to
LINE IN 2). And will turn red when
disconnected or when you turn off
TV / external device.
NOTE:
If the volume of TV or an external
device is too low, the unit also turn
off automatically.
Adjust Volume Level
During play, press the VOLUME+/-
buttons to increase/decrease the
volume level.
If the unit is connected to the TV’s
headphne jack, you can also
control the Volume Level by using
the TV’s remote control set directly.
Super Bass Boost
Press the RS-BASS button to turn on
thebass,theindicatorashesfora
longer time (abouts 1s-2s). Press this
button again to turn off the bass,
the indicator flashes for a shorter
time (about 0.5s-1s).
Mute Sound
During play, press the MUTE button
to mute or restore sound. Press this
button again or VOL+/VOL - buttos
to cancel the effect.
Program Smart Remote Control to
Control TV
You can store a total of 7 most
frequently used function of you TV
in the TV (learning zone) of smart
remote control. This feature allows
you to use only one remote control
to operate all of your TV.
By default, the remote control
codes of a TV are stored in the
smart remote control. The available
p r e s e t b u t t o n s a r e O N / O F F ,
FUNCTION, ENTER, TV VOL+/VOL-,
TV CH+/CH-.
NOTE:
During the learning process, the
normal remote control functions
are disabled.
1 Place the smart remote control (A)
within 5mm-50mm distance from TV
remote control (B).
2 Press and hold LEARN button for
2 seconds to activate the learning
mode. A red indicator on the smart
remote control (A) lights up.
3 Press one of the TV (learning zone)
buttons on the smart remote
control (A), the red indicator
 ashes.
4 Press the button on TV remote
control (B) that is to be stored on
the smart remote control (A). When
the code is received successfully,
 theredindicatorashes3times,
then turns red again. If the red
Basic Operations
8
www.tibo-electronics.com

9
 indicatorashesbutnotturnred,
code received is not successfully.
5 Repeat steps 3-4 to program more
buttons on the smart remote
control (A).
6 Press LEARN to save the learning
and then to exit the learning mode.
Troubleshooting
To keep the warranty valid, never try
to repair the system yourself. If you
encounter problems when using this
unit, check the following points before
requesting service.
No power
- Ensure that the AC cord of the
apparatus is connected properly.
- Ensure that there is power at the
AC outlet.
- Press standby button to turn the
unit on.
Remote control does not work
- Before you press any function
 button,rstselectthecorrect
source.
- Reduce the distance between the
remote control and the unit.
- Insert the battery with its polarities
(+/-) aligned as indicated.
- Replace the battery.
- Aim the remote control directly at
the ensor on the front of the unit.
No Response From the Unit
- Disconnect and reconnect the AC
power plug, then turn on the unit
again.
Specications
General
Power Requirements..AC 230V ~ 50Hz
Power Consumption .................... 6.5W
Output Power .............. 7.5W x 2 + 15W
Total Harmonic Distortion .....................
.......................................... 1%(1kHz, 1W)
Audio Input Sensitivity/Impedance
LINE: .................................500mV/47kΩ
Frequency Response ............................
..........................40Hz - 20kHz(+0 / -3dB)
Unit Dimensions (W x H x D)..................
...................................584 x 50 x 218mm
Speaker
Front
Impedance...................................... 3Ω
Rate Power .................................... 10W
Woofer
Impedance...................................... 6Ω
Rate Power .................................... 30W
Remote
Distance ............................................6m
Angle ................................................ 30O
9

10
www.tibo-electronics.com