TIGRESS TigerShark 88800 Instruction Manual

Installation and Maintenance
TigerShark Top Mount Outrigger Holders
Models 88800 & 88805
Congratulations on your purchase of a precision top mount outrigger holder!
TigerShark I Electric LineRigger™:
If you have purchased our electric model, prepare your top with our enclosed 4 x 6 w/3” hold diagram
and simply place into the 3” hole and bolt in with quality 304 5/5” -18” x length required stainless steel
machine screws, and follow the diagram enclosed to hook up the electric. (Wiring conforms to UL1426
Marne Specs.)
a. Very important –we recommend the use of a certified electrician for this installation.
b. Installation should conform to E9 and E11 ABYC specifications for electrical installation.
TigerShark III Manual LineRigger™:
If you have purchased our TigerShark III Manual version, there is no assembly required: simply place in
3” hole and bolt in.
Maintenance:
Wash with fresh water after each use.
Warranty:
Your new TigerShark Top Mount Holder was inspected and tested before leaving the factory. We
warranty this product to be free from defects in materials and workmanship under normal use and
service for a period of one year from date of purchase.

For prompt repair and service, please return your Tigress product with dated proof of purchase to
Tigress Outriggers & Gear at the address below:
3600 23rd Avenue South
Lake Worth, FL 33461
[phone]
Warranty Registration Card
Please complete and return with copy of receipt, so that we may add you to our owner registration files.
Name: __________________________________________
Address: ________________________________________
City:_________________State:___________Zip: _______
Date Purchased:____________________________
Product #:_____________________________
Product Description:______________________________
Mail To:
Tigress Outriggers & Gear
3600 23rd Avenue South
Lake Worth, FL 33461
Attn: Warranty Department