TikkTokk POKANO DARK DEN User manual

Step Screw 2nd part of top corners9 :
onto screw and repeat on all corners
Step Position Top Join only8a :
for installation onto the screw
Step Screw into8b :
the top join only
Step Screw all the way to the top8c :
ASSEMBLY GUIDE
POKANO DARK DEN
P1P4
www.tikktokk.com
TIKKTOKK POKANO DARK DEN ASSEMBLY GUIDE
Product code: POK101
TikkTokk Batch #:
Date:
03
Assembly Level
VERY HIGH
Assembly Level
HIGH
Assembly Level
AVERAGE
Assembly Level
LOW
Assembly Level
VERY LOW
Assembly Level
NONE
Assembly Level
AVE-HIGH
Assembly by an Adult
!
WARNING
[phone](0)
tikktokk.mb
[email protected]
www.tikktokk.com
Unit 3, 280 New Line d,R
Dural, NSW, 2158,
Australia
HOTLINE:
SKYPE:
EMAIL:
WEB:
ADDRESS:
CONSUMER ASSISTANCE
TikkTokk HONG KONG
Room 1-2-1304, Tome Mansion
No139 Fuzhou North Rd
266032 Qingdao
Shandong China
EXPORTER
TikkTokk Australia
Unit 3, 280 New Line Rd
Dural, NSW, 2158
Australia
IMPORTER
SAFETY NOTICE!!
ENSURE this DEVICE is used in a Safe location. PAY ATTENTION TO YOUR CHILDREN AT ALL TIMES.
Incorrect Installation may result in instability and weakness. Keep Plastic Bag and Spare parts away from Children.

Step Repeat with all 5 remaining Vertical-Poles3b :
Step Insert Vertical-Poles into top of the Fabric3a :
Step Select any Top-layer pole. Place it over4a :
two adjacent Vertical Poles with gears facing up
Step Repeat on alternate Horizontal poles,4b :
so that three poles are positioned
Step Place 6 Screws into6 :
tops of Vertical Poles
Step With gears facing5a :
downward, place remaining
’sthree Poles over Vertical
Step Insure all 6 Top5b :
lcorners ook as follows
Step Seperate Top-Poles from Bottom-Poles1 :
Step Install Screw upward, through ower-layer orners2a : ALL l c
Step Ensure screw enters the fabric opening on ower-layer orners2b : ALL l c
P3
www.tikktokk.com
TIKKTOKK POKANO DARK DEN ASSEMBLY GUIDE
P2
www.tikktokk.com
TIKKTOKK POKANO DARK DEN ASSEMBLY GUIDE