Tikli Multi-purpose Shed User manual

www.tiklikauppa.com
Tikli Multi-purpose Shed Assembly Instructions
PARTS
1. Grating 1 700x1125 2 pcs
2. Grating 2 1500x1125 6 pcs
3. Upright post PT1-7 9 pcs
4. Allen screw (M6x16) 48 pcs
5. Mounting bracket 18 pcs
6. Bolt and nut (M10x20) 18 pcs
7. Ceiling joist 3 pcs
8. Steel lath 13 pcs
9. Drilling screw 4.8x16 78 pcs
10. Drip edge 1 pc
11. Steel roofing 1 pc
12. Plate screw 4.2 x 17 RST 90 pcs
13. Rake flashing 2 pcs
14. Upper eave flashing 1 pc
15. Roofing screw 4.8 x 23 30 pcs
Tikli Yard: Multi-purpose shed
The Tikli multi-purpose shed is a neat solution for storage needs in your home yard: the shed can hold bikes, outdoor
toys, and even dustbins. Thanks to its construction from modular elements, the shelter can be set up on site. The
aluminium Tikli multi-purpose shed is durable and almost maintenance-free; simple washing is sufficient. If the surface
paint becomes damaged, we recommend patch painting. The Tikli multi-purpose shed is suitable for use as, among
other things, a bike shelter, yard shed and condominium or public area dustbin.
You will need:
• 2 17-mm spanners
• 4 mm Allen key
• drill
• screw bit for roofing screw 8 mm
• screw bit PH2

www.tiklikauppa.com
Instructions
A
Attach the mounting brackets to the lower end of the upright posts using the bolts (M10x20) in the prepared holes.
B
Attach grating 2 between upright posts 1 and 2 using Allen screws (M6x16) in the threads in the posts.
Attach grating 2 to upright post 2 using Allen screws (M6x16) in the threads in the posts.
Perform final tightening of Allen screws (part 4) only in the finishing stage.
C
Assemble the shed one wall at a time in the order shown in the pictures.
Continue to the next page…

www.tiklikauppa.com
D
Install the ceiling joists into the indentations at the upper end of the upright posts. Attach the ceiling joists (part 7) to the upright
posts with bolts (M10x110).
Make sure that the perforations in the ceiling joists diverge from each other!
E
Attach the drip edge to the lower end of the ceiling joists. Make sure that the edge is installed straight.
F
Attach the steel laths (13 pcs) to the ceiling joists with drilling screws (4.8x16) such that the lowest and highest ones are at the end
of the ceiling joists, with the laths’ straight part downward.
G
Begin installation of the roof from the right. Attach the roof with plate screws 4.2x17.
Additional instructions on installing the roof can be found in the Ruukki installation instructions,
http://www.ruukki.com/fin/katot/tuki-ja-ohjeet/esitteet-ja-asennusohjeet
H
Attach the rake flashing with roofing screws 4.8x23.
I
Attach the upper eave flashing with roofing screws 4.8x23.
Continue to the next page…

www.tiklikauppa.com
J
Lift the door element into place.
H
Adjust the shed so it is straight and check the functioning of the door.
Attach the shed to a surface with anchor screws. Anchor screws not included with the product.