Tong-Da C050-3W User manual

Caution
1.Disconnectthe fixture from AC power before removing or
installing the lamp, gobo or
any part. and when not in use.
2. To prevent electric shock, match wide-blade of plug to wide
slot.
Fully insert. .
3. Do not expose the fixture to rain, SIlOW, or moisture. The
CO-SG-3W is designed for dry locations use only.
4. Ket:p protective barrierin place or replace removable parts.
afterservicinq. .
5. Keep a rninijnurn distance to combustible materials of 1.0
meter
and keep a minimum distance to illuminated surfaces
of 0.5 meter.' .
6. Lamps, gobos" and all parts become very hot when they have
been in use toran extended period of time, sa it is important.
never to handle lamps, qoboa.or o+hArparts untilthey have
had sufficient time to cool. . ..
Specfications
Pnys.cal
Length '
Width ,.... . : -•...•225ITJm
·.8,5. rnrn
235.mrn
High 1'.Okg
Weight .'
Installation
Minimum distance to
combustible materials 1 m
Minimum distance
to illuminated surfaces 0.5 m
. .' . . ~.".
Construction
Housing Metal and Alurnlnurn
Thermal .
Ma)(imum ambientfemperature (Ta) , 40·C
Maximum surface-temperature, steady state, Ta=40'C :
Ji:?S'C
. . .
Source
Lamp Mr1612V50W··
Base : ; ·•.,.•. :u 5.3
Tong-Da Industry Co .• Ltd
All rights reserved.No part of this manual may be
reproduced .in any form orby any means, without
permission in writing from Tonz-Da Industrv Cll).!Jrl
loleg-D" 3led14stty ao., ltd
COSO .. 3W
Image projector
user manual
http://www.ur.url.tw/
70ktJ·'Dt:t lItJAtlktJ

•••••••••••••
Introuuction
Thank you for selecfing the Delan C0-S0-3W image projector.
The C050(N) projectors series are a range of projectors made to
perform the valuable task
of projecting images or illuminating subjects
perfectly, suited tomany applications: shops,trade shows and
axhlbitions.showrooma.bar and hotels etc.
Main Features:
• Dedicated
designed lens unit to maximize Ught output and projection
clarity.
-Long life lamp:
MR16 12V SOW 4000 hours.
- Beam angle 10-35 degree.
-Stainless steel orglass 9000:diameter 37.5mm, Image diameter
max 23mm.
- Gobo rotate 360 degree,
speed: 2-2.5 R.P.M.
-Dichroic
color filters can select: standard colors.
-Adjustable pan: 350 Tilt: 90 .
-Dimensions LxWxH: 220x75x185 mm
- All type models
project images with the most utmost precision and
sharpness.with
extraor dinarily unilorrn projection allover the
illuminated surface.
-In die-cast and extruded aluminium.
Maintenance
Replacing The Lamp·
1. Disconnect the fixture from the power and allow it to
. cool for 15
minutes before removing the lamp cover.
2 . Hernove the-old lamp from the socket. Back case
8-. 'Insert the.new lamp firmly
into the lamp socket.
4 . If Mr16 with glass cover,
back plate of house need c::::=
to be take outto replace lamp. <>
Installation
1. Install the box to flat surface with screws tbrough mQ.urtttrrg.:h.oJes.
2. FUlly insert plug and the image
projector start to work.
Changing The Gobo & Color Filter
1 . Disconnect the fixture
from power and allow
it to cool for 15 minutes.
2 , Remove the spring and
put the gobo &'Golor filter
in the socket.
3. Installation is the
reverse. ~ c?/
Gobo & cOlo.J'filler/
Adjusting The Focus
1 . Loosen tha tWo screws
2. Move the lensforwarti and back to find the
best Irnape positlon,
. 3. Fasten the two screws.
Note:the fl~t lens sIde toward to the lamp
/
, . Lens
CleanlngThe Optical Components
Vsecare whenicleaning optical components. The surface on a
dichrofctilter is'abhievetl byjneans of a special multi-layer
coating and everrsmattscrafches' may be visible. Residue from
cleaning flliid'S"can bake onto components and ruin them.
1.
Allow the components to cool completely.
2. Wash dirty lenses a .. Qd filters with isopropyl alcohol. A gen.erous
amount (n rEt9u1ar grass cleaner may also be used, but no .
resldues.should remain.
3. Hinsewith distillep water. Mixing the water with a small amount
of wet~iJig.agent such as K6dakPhotoHo will help prevent streaking
an.d.s.pb.tting. .
4.
Dry with a clean, sottandlfnt-Iree cloth-or blow dry with
compressed-air. . ..
0 ••••• · •••••••
• •• oe ••••• @~.