TOPSCCC EX-94421 User manual

EX-94421
Analog Input
and
User's Manual (V1.0)
旭蒙科技股份有限公司
TOPSCCCTechnologyCo.,Ltd.
台北市內湖區陽光街345巷12號5 樓
5F.,No.12,Lane345.,Yang-GuangSt.,
Nei-Hu,Taipei,
Taiwan
TEL ： [phone]
FAX ： [phone]
http://www.topsccc.com.tw
E-m ail ：[email protected]

1
Correction record
Version Record

2
Contents
1. Forward...............................................................................................................................................4
2. Features...............................................................................................................................................5
3. Specifications......................................................................................................................................6
3.1 EX-94421 Main card .................................................................................................................6
3.2 EX-962137 37P Din rail mounted dummy wiring board (Option)............................................6
4. Layout and dimensions.......................................................................................................................7
4.1 EX-94421 Main card .................................................................................................................7
4.2 EX-962137 37PM Din rail mounted dummy wiring board.......................................................8
5. Pin definitions.....................................................................................................................................9
5.1 Pin definitions for JF1 (on card EX-962137 37P) connector ....................................................9
5.2 Pin definitions for JM1 (extension EX-962137 37P) connector..............................................10
6. I/O interface diagram........................................................................................................................11
6.1 Analog I/O diagram.................................................................................................................11
7. Hardware descriptions ......................................................................................................................12
7.1 Card ID setting.........................................................................................................................12
7.2 Analog input ............................................................................................................................12
8. Applications......................................................................................................................................13
8.1 Analog section:........................................................................................................................13

3
Notes on hardware installation
Please follow step by step as you are installing the control cards.
1. Be sure your system is power off.
2. Be sure your external power supply for the wiring board is power off.
3. Plug your control card in slot, and make sure the golden fingers are put in right contacts.
4. Fasten the screw to fix the card.
5. Connect the cable between the card and wiring board.
6. Connect the external power supply for the wiring board.
7. Recheck everything is OK before system power on.
8. External power on.

4
1. Forward
Thank you for your selection of our PCI bus EX-94421 a multi-channel analog input card.
An analog input card maybe as simply as just signal conversion but the long-term stable is most
concerned; we provide it for industrial environment application.

5
2. Features
General:
2.1.1 PCI plug and play function with card ID for 16 identical cards
Analog function:
2.1.2 8 channel 12bit analog inputs (standard:8 channels)
2.1.3 Software selectable input range: -10V~ +10V, -5V~ +5V , 0~10V, 0~5V

6
3. Specifications
3.1 EX-94421 Main card
General:
3.1.1 PCI data width ─32 Bits
3.1.2 Card ID ─4 bits
3.1.3 Dimension ─156(W)*112(H)mm , 6.2(W) * 4.5(H)in
Analog block:
3.1.4 input channels ─8 channel single end or differential (standard:8 channels)
3.1.5 resolution ─12bit
3.1.6 input range ─-10V~ +10V, -5V~ +5V , 0~10V, 0~5V
3.1.7 range selection ─software selectable
3.1.8 conversion speed ─6us per channel
3.1.9 accuracy ─full range within 9mV
3.2 EX-962137 37P Din rail mounted dummy wiring board (Option)
3.2.1 Connection cable ─D-type EX-962137 37P cable to connect main and wiring
board
3.2.2 Dimension ─90(W)*113(L)*60(H)mm , 3.6(W)*4.5(L)*2.4(H)in

7
4. Layout and dimensions
4.1 EX-94421 Main card

8
4.2 EX-962137 37PM Din rail mounted dummy wiring board

9
5. Pindefinitions
5.1 Pin definitions for JF1 (on card EX-962137 37P) connector
PIN DESCRIPTIONS PIN DESCRIPTIONS
1 DIO00: dio port0 bit0
trigger in of counter0
20 DIO01: dio port0 bit1
trigger in of counter1
2 DIO02: dio port0 bit2 21 DIO03: dio port0 bit3
3 DIO04: dio port0 bit4 22 DIO05: dio port0 bit5
4 DIO06: dio port0 bit6 23 DIO07: dio port0 bit7
5 DIO10: dio port1 bit0
trigger out of
counter0/timer0
24 DIO11: dio port1 bit1
trigger out of
counter1/timer1
6 DIO12: dio port1 bit2 25 DIO13: dio port1 bit3
7 DIO14: dio port1 bit4 26 DIO15: dio port1 bit5
8 DIO16: dio port1 bit6 27 DIO17: dio port1 bit7
9 AI0+: analog in0+ 28 AI0-: analog in0-
10 AI1+: analog in1+ 29 AI1-: analog in1-
11 AI2+: analog in2+ 30 AI2-: analog in2-
12 AI3+: analog in3+ 31 AI3-: analog in3-
13 AI4+: analog in4+ 32 AI4-: analog in4-
14 AI5+: analog in5+ 33 AI5-: analog in5-
15 AI6+: analog in6+ 34 AI6-: analog in6-
16 AI7+: analog in7+ 35 AI7-: analog in7-
17 +5V (out) 36 GND
18 GND 37 -15Ve (out)
19 +15Ve (out)
NOTE: For single end input application, one end of differential input terminal should wire to ground,
Say AI0 for example, AI0- should wire to ground for single end input application.
NOTE: DIO00~07, DIO10~17 do not populate on this version

10
5.2 Pin definitions for JM1 (extension EX-962137 37P) connector
PIN DESCRIPTIONS PIN DESCRIPTIONS
1 AI8+: analog in8+ 20 AI8-: analog in8-
2 AI9+: analog in9+ 21 AI9-: analog in9-
3 AI10+: analog in10+ 22 AI10-: analog in10-
4 AI11+: analog in11+ 23 AI11-: analog in11-
5 AI12+: analog in12+ 24 AI12-: analog in12-
6 AI13+: analog in13+ 25 AI13-: analog in13-
7 AI14+: analog in14+ 26 AI14-: analog in14-
8 AI15+: analog in15+ 27 AI15-: analog in15-
9 AI16+: analog in16+ 28 AI16-: analog in16-
10 AI17+: analog in17+ 29 AI17-: analog in17-
11 AI18+: analog in18+ 30 AI18-: analog in18-
12 AI19+: analog in19+ 31 AI19-: analog in19-
13 AI20+: analog in20+ 32 AI20-: analog in20-
14 AI21+: analog in21+ 33 AI21-: analog in21-
15 AI22+: analog in22+ 34 AI22-: analog in22-
16 AI23+: analog in23+ 35 AI23-: analog in23-
17 +5V (out) 36 GND
18 GND 37 -15Ve (out)
19 +15Ve (out)
NOTE: JM1 do not populate on this version

11
6. I/Ointerfacediagram
6.1 Analog I/O diagram
Differential Analog Input Single end Analog Input

12
7. Hardwaredescriptions
7.1 Card ID setting
Since PCI cards have plug and play function, the card ID is required for programmer to
identify which card he/she will control without knowing the physical address assigned by the
Windows (OS). A 16 position rotary switch is used for extinguishing the 16 identical cards.
7.2 Analog input
There are 8 channels of analog input on card, the hardware may accept 0-5V, 0-10V,
-5V-+5V, -10V - +10V range on chip basis.

13
8. Applications
8.1 Analog section:
For measurement of analog signal such as:
-temperature
-voltage
-current
-flow
-light
-....
Note: The analog signal should be pre-processed to the acceptable range of the card.