TrackMan Portable User manual

WELCOME TO
TRACKMAN
Congratulations on the purchase of
your TrackMan Portable.
This guide helps you set it up, and gets
you up and running.
Your battery is charged and ready to
go, so you can start using your Track-
Man right out of the box

WHAT’S IN
THE BOX
· 1 TrackMan B1
· 1 Power supply with cable
· 1 Micro USB service cable
· 1 Protection foam
· 1 Tripod mounting plate with
4 screws

SETUP
REQUIREMENTS
You need the following equipment:
· Apple iPad running iOS 11 or later
· For portable setup: * Tripod
Quick-start Kit from TrackMan or
your own Tripod equipment. See
Appendix for requirements
* Supported iPad models: iPad 4th/5th
gen, 2017 model or later. iPad Pro
1st/2nd gen. iPad Air 2

Wi Battery
Ethernet
Power button
Micro USB
Power plug-in
Factory reset
Primary
Secondary
CONNECTIONS
& INDICATORS

GETTING
STARTED

1
ATTACHING THE
COVER
Ensure that the protection foam
is attached properly.

2
MOUNTING ON
A TRIPOD
These instructions apply to the
optional TrackMan Tripod Quick-
start Kit:
·Assemble backing plate on the
TrackMan using 4 provided screws
·Assemble tripod-head quick release
plate to the bottom of backing plate
·Fasten the tripod-head on the
tripod.
·Mount the TrackMan with the quick
release plate on the tripod. Push the
tripod-head lever to ensure it is fully
locked.

3
TRACKMAN
PLACEMENT
Place the TrackMan anywhere in the
marked area 6-12 ft behind home-
plate. In a later step, the TrackMan
Baseball iPad App will guide you for
detailed placement instructions.

4
TURN ON
THE POWER
Turn on the power by pressing and
holding the power button for one
second.
Wait until Wi-Fi symbol lights solid
blue (this may take up to 30 seconds)

5
INSTALL THE
TRACKMAN APP
You must be connected to the internet
the rst time you install and login to
the TrackMan Baseball App.
·Install the App on your iPad: Use the
link in the invitation email you received
or search for “TrackMan Baseball” on
the Apple App Store.
·Login to the App with the account you
created from the invitation email*
* Contact your TrackMan
Administrator if you did
not receive an invitation
email.

6
USING THE
TRACKMAN B1
·Open the TrackMan app, follow
instructions to connect and calibrate
your TrackMan and start a new prac-
tice session.
·Open a web browser and go to
http://teamportal.trackmanbaseball.
com to manage your orgvanization,
view reports and more.

APPENDIX

BATTERY
STATUS
Full
75%
50%
25%
Low
Charged
Charging
Not charging

Off
Ready
Error
Booting
Updating
TRACKMAN B1
STATUS

9
TRIPOD
REQUIREMENTS
You may use your own Tripod equip-
ment instead of the TrackMan Tripod
Quick-start Kit.
You’ll need:
· An adjustable Tripod head with a
3/8” screw. Trackman recommends
the Manfrotto MHXPRO-3WG XPRO
Geared Head
·A Tripod that meets these specs:
- Min. height: 54 in. (137 cm)
- Max. height: 108 in. (274 cm)
- Min. load capacity: 10 lbs. (4.5 kg)