
6 Aceletiqs Bullseye 9-Hole Pitcher’s Pocket Assembly Guide & User Manual 7
SETUPGUIDE
STEP 1
STEP 2
Insert the two support legs
into the tubes at the base
of the pitcher’s pocket.
Use a bolt to secure each
leg to the base.
ADJUST HEIGHT
The pitcher’s pocket can be
adjued to three different
heights.
Remove both bolts to raise
or lower the target and then
replace the bolts to secure.
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR REFERENCE.
WARNING: To avoid injury during assembly, disassembly, use,
adjument, and/or movement of the Bullseye 9-Hole Pitching
Target, the following warnings MUST be observed at all times:
RESPONSIBILITIES
1. It is the responsibility of the owner to ensure that all users of
the pitching target are adequately informed of all warnings and
precautions.
2. Use the pitching target only as inructed in this manual.
3. Adult supervision is required at all times.
4. Place the pitching target on level. well-drained surface.
5. Pitching target should only be used with baseballs, softballs,
and practice balls.
6. Periodically inspect the netting, frame, and padding. to ensure
good condition.
SAFETY INSTRUCTIONS