GET TO KNOW YOUR TRIA HAIR REMOVAL
LASER PRECISION
BEFORE FIRST TREATMENT
For detailed directions and important safety warnings, please
read the complete Instructions for Use guide before use.
ACTIVATE: A quick, one-time activation is required before you can use the
Tria Laser Precision.
In the US: visit triabeauty.com/activate
In the UK: visit triabeauty.co.uk/activate
CHARGE: You will also need to charge the Tria Laser Precision for at
least 2 hours before you use it or anytime the battery is empty. Each battery
charge lasts approximately 15-20 minutes.
HOW TO TREAT
Before every treatment, shave, clean and dry the area you wish to treat . Before
your first full treatment on any new area, perform a patch test in that area. Repeat
treatments every 2 weeks for up to 3 months or until you’re satisfied with results.
1TURN ON DEVICE
Unplug the Tria Laser Precision from
the battery charger and press the
power button.
2UNLOCK
Unlock by holding the device tip with
the built-in skin sensor against the
skin you wish to treat. If the Tria Laser
Precision is safe for your skin tone, the
laser will emit a series of beeps and
unlock.
3SET THE TREATMENT LEVEL
Press the power button to adjust
levels. For best results, treat at the
highest level that you can tolerate.
In a clinical study, higher levels were
found to be 2-3 times more effective.
4
TREAT. HOLD FOR ONE BEEP.
Touch and hold the treatment window
to the skin until you hear a beep.
Then, lift and place the laser back on
the skin so that it overlaps the previous
spot by about 1/4 inch, or 5 mm.
NOTE: It is normal for time between
beeps to lengthen as you progress
through each treatment. This should
not affect your results.
CHARGER SOCKET
Plug the power cord
into this socket
POWER BUTTON
Adjusts the treatment level
and turns the Tria Laser
Precision on and off
BATTERY CHARGER
Charges the Tria Laser
Precision. The Tria Laser
Precision will not operate
while plugged in.
POWER CORD
Connects the device and
the battery charger
INDICATOR LIGHTS
Indicates power on,
treatment level, battery
charge, skin sensor lock
and error status
TREATMENT WINDOW
Delivers laser light during
treatment
SKIN SENSOR
A safety feature
that unlocks the Tria
Laser Precision
BOTTOM OF DEVICE
INDICATOR LIGHTS GUIDE
Low HighMedium
O Skin Sensor
Locked
Fully
Charged
(when
plugged in)
Error
(3 flashing)
Treatment Levels
Other Indicators
