Triclimb Pwt Original instructions

Assembly
instructions,
maintenance
and safety
information
Triclimb Pwt
Batch no. ....................

Triclimb Pwt
Suitable for ages 0+ | Weight limit – 100kg
ENCOURAGE – ENHANCE – ENGAGE
Created to encourage children to be active, imaginative and creative in their play, the Triclimb seeks to
enhance balance, develop motor skills and engage both mind and muscle.
Benefits of Play: The Triclimb provides a surface designed for climbing which is intended for young children.
Younger children are still developing a sense of judgement and learning the strength of their own bodies.
They will be testing how far and how high they can jump and move. Their balance is still under development,
and they are learning how to solve physical problems using their bodies. The Triclimb provides a chance to
develop all sorts of skills appropriate to their age; climbing gives them the opportunity to test, retest and
perfect their strength, coordination, self-confidence, concentration and independence.
CARE INSTRUCTIONS
Caring for your Triclimb Pwt is not only essential for ensuring safety, but will also add years to its life for
your children to play on and enjoy it as they grow.
WARNING: if the checks and maintenance of the Triclimb are not carried out the activity toy could overturn
or otherwise become a hazard.
*All bolts and fixings should be checked regularly and tightened if necessary.
*It is important to check your Triclimb for wear and damage regularly. If you are unsure as to the integrity of
any component, replace it immediately.
*We recommend that you regularly check your climbing frame for splits, broken or cracked wood and for
loose, missing or sharp-edged hardware. Replace, tighten and/or sand smooth as required prior to playing.
*The wooden components are manufactured from FSC birch plywood and solid timber poles; they are
protected with a durable child/toy-safe finish.
*To clean, wipe with a damp cloth and mild detergent. Dry immediately. Leaving water or cleaning agent on
the surface may damage the finish. Do not use abrasive cleansers.
* Do not modify the unit. Triclimb is not responsible for any injury arising as a result of modifications made by
customers to our products without our supervision, testing, or evaluation.

*It is extremely important that you read and retain the information in this WARNINGS section to
reduce the risk of injury.
*Warning: contains small parts – choking hazard.
*Children must be supervised at all times while using the Triclimb.
*No running, pushing or fighting.
*Only use the Triclimb for its intended purpose. For indoor use only, in a domestic setting.
*Tip over hazard - Place play-frame on a level surface.
*Do not allow children to play on the Triclimb frame until the unit is fully opened.
*Keep floors free of trip hazards and observe an obstacle free safety zone of at least 2m in all
directions around the unit.
*To minimize risk of injury from falling, do not install over a hard surface; a protective surface
should be used. Maximum vertical fall height - 400mm
*Never allow children to play with ropes, clotheslines, pet leashes, cables, chains or cord-like items
when using this play-frame or to attach these items to the play-frame.
*Never allow children to wear loose fitting clothing, ponchos, hoods, scarves, capes, necklaces,
items with draw-strings, cords or ties when using this Triclimb
*Do not allow children to wear open toe or heel footwear like sandals or flip–flops whilst climbing.
*Do not permit rough play or use of equipment in a manner for which it was not intended. Jumping
from the top, elevated rungs could be dangerous.
*Observe capacity limitations of your play-frame - 1 user maximum.
*Recommended age: 0 months – 5 years
*Weight limit – 100kg
*Not suitable for children under 36 months until fully assembled – fall hazard and small parts –
choking hazard.
*Risk of entrapment when folding. Never allow children to open and close the frame – ensure the
thumb screws are secure both in the open position and the folded position. WARNING –
periodically check thumb screws to make sure they are securely in place.
WARNINGS
Tools needed:
Hex head Allen key (provided)
Check all parts are present.
ASSEMBLY GUIDE
AClimbing Rungs x 8
BLeg sets (assembled) x 2
CFlat head screws (hex head) x 16
DThumb screws x 2
EHex head Allen key x 1
Contents
A
C D E
B

1
Insert rungs into recessed holes on one side.
Insert
flat head screws (C) and tighten using the hex key
provided.
Items required:
C x 4
Using the remaining rungs, repeat step 2.
Items required:
C x 4
3
Repeat Step 2 on the opposite side.
Items required:
C x 4
4
Lay out the leg assemblies and four of the rungs
roughly as above. Place the legs with the larger
holes facing inwards.
Items required:
A x 4
B x 2
2

Repeat step 3 on the opposite side.
Items required:
C x 4
5Ensure all rungs are securely inserted into
leg recesses and that flat head screws (C)
are screwed tightly and tight to the legs.
Tightening the screws requires significant
strength.
6
7Open the Triclimb frame and stand it up.
The frame may rock slightly, which is
normal. Place your hands at the top of the A
frame and press down firmly. This will help
to square up the frame. You may need to
rock the frame back and forth a few times
while applying downward pressure on the
frame to ensure the ends of all four legs sit
flat on the floor and that the unit does not
rock when the pressure is released.
What to do if your Triclimb still does not sit flat on the ground?
You will need a book (or something similar) about 40mm thick to act at a raiser.
CHECK POINT
1) Open the Triclimb frame and insert the thumb screws.
2) Place the book or similar under one of the two opposing legs that are
flat to the ground.
3) Push down on the top joints. You may hear a creaking sound - do not be
alarmed, this is just the moving into correct alignment.
4) Remove the book or similar (if rocking remains repeat adding further
height to the raiser until the frame aligns).
5) You should now have a correctly aligned frame.
If there is still a slight wobble, simply increase the size of the raiser and
repeat step 2 and 3.

IPO - Registered design.
Model – P
Designed and Manufactured by Triclimb Ltd,
Triclimb Ltd. Ty Gelert, Porthmadog, LL499NX
Triclimb NI, PO Box 620, CRAIGAVON BT64 9EL
www.triclimb.co.uk [email protected]
IMPORTANT! These instructions must be followed for safe assembly and use.
Please retain for future reference. 2021 V1
OPENING AND CLOSING
Your Triclimb includes two thumb screws that are designed to lock the product in an open or closed position.
To open the Tri Climb:
1) Fully unscrew and remove both thumb screws from the sides of the unit
2) Holding the unit at the bottom edges, carefully open the unit. The mechanism may be sti, which is by
design to prevent accidental opening / closing
3) Once fully open, replace both thumb screws into the unit prior to use.
Closing the unit is the reverse of opening.