Tristate LB-BTAMP5 User manual

Wall Plate Audio Amplifier with CSR B/T Wireless v5.0 User Manual
FEATURES
B/T v5.0 with apt-X
24W class-D high quality power amplifier
Compact size wall plate design
Easy installation
Configurable Device Name & PIN Code
SPECIFICATIONS
Audio Inputs :B/T Receiver or stereo audio line level
B/T Version: B/T v5.0 compliant with apt-X
B/T Receive Distance:30 Meters (open space)
Power Amplifier Type :Stereo Class-D
Output power:24W(rms) per channel (@ RL=4 ohm)
THD+N :0.1 % (@ RL=4 ohm, f = 1 kHz)
Minimum Load Resistance :4 ohm
Includes Speaker Protection circuit.
Power Source:24 VDC
3 min link-lost timeout function.
B/T automatically switch to pairing state if
reconnecting fail.
Audio priority: B/T > Aux In
CONNECT AND OPERATE
STEP 1: Install the unit in wall and connect power and speaker cables
STEP 2: Turn on the rotary switch to power up
STEP 3: B/T status LED quick blinking in open paring mode, connect your B/T devices to B/T Audio Amplifier
STEP 4: For Aux-In source, plug-in audio cable and play. The unit will automatically switch between B/T and Aux-In

Configure Device Name & PIN Code
STEP1: Connect the USB TTL Cable to the computer’s USB port and then connect the other end of the cable
to the Micro USB Port on the wall plate
STEP2: Launch the Conuraon Tool soware.
STEP3: Select correspondinCom Port

STEP4: Enter New Device Name
STEP5: Write to device
STEP6: Confirm the Bluetooth Device name with Smartphone. If name is not changed. Make sure USB TTL
Cable is connected to the Micro USB Port on the wall plate and go back STEP1 -STEP5

STEP7: Enter New Pin Code
STEP8: Write to device
STEP9: Confirm the Bluetooth Pin Code with Smartphone. If Pin Code is not changed. Make sure USB TTL
Cable is connected to the Micro USB Port on the wall plate and go back STEP7 – STEP8