TTS EY07295 User manual

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
Maintenance
●The structures should be regularly inspected
and the bolts and screws tightened, if necessary.
• The longevity of your playhouse will be
enhanced by the annually application of a high
quality wood preservative.
• Care should be taken to avoid damaging the
timber during any gardening (mowing, strimming
etc) to avoid breaking the preservative envelope.
This unit is designed for use outdoors and on a flat surface.1m
should be kept clear around the edge of the playhouse to ensure
safe play.
An Adult should ALWAYS SUPE VISE PLAY!
Please retain this information and our contact details for future
reference.
Tools
●Impact or drill driver.
●Driver Bit – PZ3
●Driver Bit - T40
●Access equipment
●Sealant Dispenser
●13mm socket/spanner
EY07295 Outdoor Play Corner
Cottage
Assembly Instructions
Fixings
6x70mm – 26
M8x110m bolts – 6
6x50mm – 3
6x 0mm – 4
6x60mm - 8
Two persons
required for
assembly
Maintenance
●The structures should be regularly inspected
and the bolts and screws tightened, if necessary.
• The longevity of your playhouse will be
enhanced by the annually application of a high
quality wood preservative.
• Care should be taken to avoid damaging the
timber during any gardening (mowing, strimming
etc) to avoid breaking the preservative envelope.
Siting
●The structure should be placed on a
level and even surface
●The structure should be in a corner
of a play area
●Consider anchoring in exposed sites

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
1
4
2
3
Back panels
x2
Front Head
Beam
Front panels x
2
Side Roof
Bars x2
Central Roof
bars x 3
Roof sections
x 4
Not Shown
-Finial

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
5
8
6
7
●Ensure that the top and bottom of
both panels are aligned
●Insert screws (B) into predrilled holes
and fasten x 4
P2
●Postion the two
back panels so
that the tallest
sides align in the
rebate of the post
(attached to one
panel)
●Repeat for the other
side
●6x70mm-4
●Fasten the second panel into post using 6x70mm-4
into predrilled holes
●Place the right
hand side panel
so that the mitred
post top is flush
with the panel
6x70 – 4
●

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
12
10
11
●Screw through side
frame of roof panel
●Fasten with 6x70 - 2
●Insert Fixing B
into out and lower
Corners of Panel 1
and Panel 3 and
tighten
●Place the Front
head beam to
connect the two
front posts as
showm
●6x70 - 4
●Place one of the
side roof panels into
the roof space so
that the side aligns
with the top of the
back panel
●Screw through front
frame of roof panel
●Fasten with 6x70 - 2

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
15 16
●Place second
central roof panel in
place and ensure
frame matches as
shown
●Bolt through central
frame bars
●M8x110 - 2
●Insert Fixing B
into out and lower
Corners of Panel 1
and Panel 3 and
tighten
WA NING
●THE OOF IS NOT FO
LOADING AT ANY TIME
●Place a front roof
panel as shown
14
13
●Repeat for the
other side
●6x70 - 5
Fasten through roof
frame into front head
beam
●6x70 - 3
Fasten through roof
frame into front head
beam
●6x70 - 3
●Bolt through side
frame bars
●M8x110 - 4

TTS Group Ltd – Park Lane Business Park, Kirby-in-Ashfield, Nottinghamshire, NG17 GU, United Kingdom www.tts-shopping.com Tel: [phone]
17
20
18
1
●Place central roof bars
over roof panel gaps
●Push up under finial and
fasten
●6x60 – 8 each
●Place side roof bars
on top of edge of
side roof panel and
fix
●6x 0 - 4
●Insert Fixing B
into out and lower
Corners of Panel 1
and Panel 3 and
tighten
●Seal gaps between
roof panels with
sealant provided
●Attach the finial to
the roof corner
●6x50 - 3