Docking the R11L Tablet PC
1. With screen side facing out and docking
connector down, insert the R11L tablet PC into
the alignment ports on docking cradle.
2. Secure the R11L tablet PC by pulling the latch
forward until a “click” is heard and the latch is
fully engaged.
3. Fully push the latch bar into position to ensure the latch is tightly secured.
NOTE: If the latch bar cannot be pushed, adjust the latch position and repeat step 3.
Undocking the R11L Tablet PC
1. Insert the latch bar key into the latch bar and
turn clockwise until a “click” is heard. Refer to
the “Unlock the Latch”section.
2. While supporting the R11L tablet PC with one
hand, push the latch backward until it fully
disengages.
