Ubiquiti NanoBracket User manual

NanoBracket™ is ingenious mounting kit that
enables simple, safe and fast installation of
NanoStation™ an other devices on wall or pole.
NanoBracket™ Universal contains
Trademarks
www.nanobracket.info
Suitable for: Suitable for:
UBNT NanoStation M5™ UBNT NanoStation 5 LOCO™
UBNT NanoStation M2™ UBNT NanoStation 2 LOCO™
UBNT NanoStation™ 5 UBNT NanoStation Loco M5™
UBNT NanoStation™ 2 UBNT NanoStation Loco M2™
AirLive® Airmax 5 StationBox™ Mikro
AirLive® Airmax 2
TP-LINK® TL-WA7510N
TP-LINK® TL-WA5210G
RF elements™ StationBox™
1 Body A
2 Body B
3 U-bolt
4 Ball hinge
5 Base
6 Holder
Screws
Nuts
Saddles
Wall plugs
Ubiquiti Networks, NanoStation™, Nanostation Loco™, NanoStation M™ and NanoStation Loco M™
are trademarks of Ubiquiti Networks, 91E. Tasman Drive, San Jose, CA 95134, USA
AirLive® is registered trademark of OvisLink Corp., 5F, NO.96, Min-Chuan Rd., Hsin-Tsin, 231, Taiwan
RF elements™ and StationBox™ are trademarks of RF elements s.r.o., Chemlonska 1, 066 03 Humenne, Slovakia
TP-Link® is registered trademark of TP-LINK Technologies CO., LTD., South Building, No.5 Keyuan Road, Central Zone,
Science & Technology Park, 518057 Nanshan, Shenzhen, P. R. China
Holder for NanoStation
NanoBracket is a holder developed especially for the
popular Wireless CPE NanoStation from Ubiquiti Networks,
StationBox from RF elements and wide range of other
devices. NanoBracket holder enables installation of the
NanoStation on wall or pole. It is possible to set the device
to any direction in 90° range by using NanoBracket. This
possibility is enabled by ball hinge. NanoBracket is made
of the highest quality UV stabilized durable ABS plastic. Its
material and color match perfectly with the NanoStation
and StationBox, therefore the device and the NanoBracket
look like one entity after mounting.
3
12
5
6
4

www.nanobracket.info
Body A Body B
Installation of
NanoBracket’s Body
to the Device
Installation of mounting
kit NanoBracket
on Console or Pole
Installation of the
NanoBracket on Wall
In the rst step, insert NanoBracket’s ball hinge (4) into the hole of the NanoBracket’s holder (6). Choose
the right Body (Body A (1) or Body B (2)) according to the type of Device you intend to mount. Put one
half of NanoBracket’s Body on holds that are placed on Device as described on picture. Put at end of
the part “ball” (4) to free space between the body of Device and body of NanoBracket. Cover it all by
the second half of NanoBracket’s Body in order to assure xed connection of the Device and both parts
of NanoBracket’s Body. Secure both parts of Body by using screws. Please follow pictures for different
alignment of Body parts and the Device when using Body A and when using Body B.
At the beginning, put U-bolt (3) on pole or console and insert the part of the NanoBracket called
“bearing (base) for ball” (5) into it. Consequently, put the Device with mounted body of NanoBracket on
U-bolt. The whole entity pulls by using nut under which we put saddles. In the meantime screw nut only
temporarily in order to be able to set the Device in required direction. When the Device is set you can pull
nuts to the end. Now, installation of the Device on pole or console by using NanoBracket mounting kit is
completed.
First, put screws M6 to holes in the part of NanoBracket called “bearing (base) for ball” (5). Put wall
plugs to the wall and screw bearing (base) for ball (5) tight to wall by using screws. Consequently, put the
Device with mounted NanoBracket on it on screws. The whole entity pulls by using nut under which we
put saddles. In the meantime screw nut only temporarily in order to be able to set the Device in required
direction. When the Device is set you can pull nuts to the end. Now, installation of the Device on wall by
using mounting kit NanoBracket is completed.