Fortinet SP-RACKTRAY-02 User manual
Fortinet Rack Mount Tray
SP-RACKTRAY-02
QuickStart Guide
3
February 17, 2022
Copyright© 2022 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered
trademarks of Fortinet, Inc., in the U.S. and other jurisdictions, and other Fortinet names herein may also be registered and/or common law
trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics
contained herein were attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network
variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding
commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding
written contract, signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform
according to certain expressly-identified performance metrics and, in such event, only the specific performance metrics expressly identified
in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same
ideal conditions as in Fortinet’s internal lab tests. In no event does Fortinet make any commitment related to future deliverables, features or
development, and circumstances may change such that any forward-looking statements herein are not accurate. Fortinet disclaims in full
any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change, modify,
transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.
For Product License Agreement / EULA and Warranty Terms, visit https://www.fortinet.com/content/dam/fortinet/assets/legal/EULA.pdf
Device Compatibility
Model Type Supported Devices
FortiGate 30D Tray Mount (Plastic Housing) 2
FortiGate 30D-POE Tray Mount (Plastic Housing) 2
FortiGate 30E Adapter Bracket 2
FortiGate 40F Adapter Bracket 2
FortiGate 50E/51E Adapter Bracket 2
FortiGate 60D Adapter Bracket 2
FortiGate 60D-POE Adapter Bracket 2
FortiGate 60E/61E Adapter Bracket 2
FortiGate 60E-POE Adapter Bracket 2
FortiGate 60F/61F Adapter Bracket 2
FortiGate Rugged 60F Tray Mount 2
FortiGate 70D Tray Mount 1
FortiGate 70D-POE Tray Mount 1
FortiGate 80D Tray Mount 1
FortiGate 80E/81E Adapter Bracket 2
FortiGate 80E-POE Adapter Bracket 2
FortiGate 81E-POE Adapter Bracket 2
FortiGate 80F Adapter Bracket 2
FortiGate 90D Tray Mount 1
FortiGate 90D-POE Tray Mount 1
FortiGate 90E Tray Mount 1
FortiGate 90E-POE Tray Mount 1
FortiGate 91E Tray Mount 1
FortiGate 92D Tray Mount 1
FortiSwitch 108E Tray Mount 1
FortiVoiceEnterprise 100E Tray Mount 1
FortiRecorder 100D Tray Mount 1
54
The Essentials
For getting started guides, setup and configuration information, refer to the
Admin Guides on https://docs.fortinet.com/
For contracts, licensing, product registration and account management,
contact FortiCare Support at https://www.fortinet.com/support/contact
Access our knowledge base, forums, videos and technical experts at
https://www.fortinet.com/support/support-services/forticare-support
Admin Guide
Customer Service
Self-service Resources
Thank you for choosing Fortinet
Package Contents
Fortinet Rack Mount Tray
SP-RACKTRAY-02
Fortinet Rack Mount Tray
8x Cable Ties
20x Various Philips M3/M4 Screws 4x Hex Screws
4x Shoulder Screws8x Rubber Feet
2x Grounding Wires
2x Adapter Brackets
QuickStart Guide
76
Installation
Optional: Secure device by using the provided 6mm M3 flathead
Plastic Housing Devices
Tray Mount
1
1
2
2
Before you begin, power off and disconnect the device; if rubber feet are
attached, remove them.
Attach three rubber feet next to the screw holes.
Place device to one side of the tray above the tray magnets.
Attach provided grounding wire to the back of the device.
Rubber Feet
98
Adapter Bracket
1
3
2
Place device to one side of the tray above the tray magnets.
Place the device onto the adapter bracket which uses magnets to
secure the device.
Note: The Kensington security slot on the device is not available when
the device is installed in the adapter bracket
Before you begin, power off and disconnect the device. If applicable,
remove the four 4mm M3 screws from the sides of the device. Note, the
Optional: If applicable, secure the device sides to the bracket using four
6mm M3 flathead screws or use up to two screws to secure the bottom
4Attach provided grounding wire from the back of the device to the rack
mount using a 6mm M3 panhead screw.
Optional: Secure the device bottom with 6mm M3 flathead screws
2 Screws
1 Screw
1110
Rack Installation
Caution: To avoid personal injury or damage to the device, we recommend
that two people mount the rack tray on a rack
1
2
4
5
3
Level and line up the rack mount tray ear holes with the rack holes.
Finger tighten four rack screws from the rack tray to the rack.
Tighten the rack screws using a screwdriver.
Connect the power and network connections, then secure the power
adapter device using the provided cable ties.
Verify that the device is level and there is 1.5 inches of space above
and below the device for adequate air flow.
Table of contents
Other Fortinet Rack & Stand manuals
