UC Logic PENATES 10.SP User manual

10.1SP
Penates 10.1SP
User Manual for Windows
Windows 7 / 8 / 8.1
Driver Version 8.0
Version：V14.07
Release Date：2014/07

Penates 10.1SP Driver Version 8.0
2
Contents
I. General Information ..............................................................................................3
OVERVIEW..................................................................................................................................3
PENATES FUNCITONS .................................................................................................................3
SYSTEM REQUIREMENTS............................................................................................................3
INSTALLING THE DRIVER SOFTWARE ON WINDOWS.................................................................3
VERYFYING HARDWARE .............................................................................................................4
HARDWARE INSTALLATION ........................................................................................................5
USAGE TIPS.................................................................................................................................6
MAPPING TO MULTIPLE MONITORS ..........................................................................................6
II. Penates configuration ............................................................................................7
THE INFO TAB .............................................................................................................................7
THE BUTTON TAB .......................................................................................................................8
Button Name......................................................................................................................8
Double Click Time ..............................................................................................................8
Pen/Eraser Toggle ..............................................................................................................8
Default................................................................................................................................8
EXPRESS KEYS DEFINE TAB .........................................................................................................9
Default................................................................................................................................9
Re-define Express keys.......................................................................................................9
Common...........................................................................................................................10
Mouse ..............................................................................................................................10
Multimedia.......................................................................................................................11
Other ................................................................................................................................11
Run ...................................................................................................................................12
Internet ............................................................................................................................13
Hot Key.............................................................................................................................14
Show Desktop ..................................................................................................................14
Switch Application............................................................................................................14
3D Switch Application (Win 7/Vista) ................................................................................14
POP MENU .......................................................................................................................14
THE PRESSURE TAB...................................................................................................................15
Pressure Test: ...................................................................................................................15
Clear .................................................................................................................................15
Click Sensitivity.................................................................................................................15
THE MONITOR SETTING TAB ....................................................................................................16
THE CALIBRATION TAB .............................................................................................................17
Calibration........................................................................................................................17
Rotate...............................................................................................................................18
THE MONITOR TUNER..............................................................................................................19
Brightness.........................................................................................................................19
Contrast............................................................................................................................19
Color Temperatures..........................................................................................................20
Restore Default ................................................................................................................20
III. Changing the Pen Tip...........................................................................................21
IV. Question & Answer..............................................................................................22

Penates 10.1SP Driver Version 8.0
3
I. General Information
OVERVIEW
Welcome to the world of Penates! You’ll be able to discover how easy it is to control your personal
computer by using a U Pen instead of a mouse.
The function of the U Pen is able to draw a line very thin, thick, light or dark (called “pressure
sensitivity”). You also can write, sign, annotate documents, and draw, sketch or paint as easily as
you would on normal paper and simulate the functions like pencil, mark pen, brush, or watercolor
pen by using commercial software packages such as Adobe® Photoshop™, Corel® Painter™ and Paint
Shop™.
PENATES FUNCITONS
After installing the device driver, your Penates features have the following functions:
Direct pointing –You can move the cursor to any location by hovering the digital pen tip over
your Penates screen.
Three-button mouse commands - Your Penates provides all the functions of a three button
mouse by using its pen tip and two buttons.
Pen scrolling –You can scroll documents and Web pages by pressing the middle button of the
digital pen over your Penates screen.
Pressure sensitivity –This feature allows you to emulate various brushes and pencils so when
you press down the pen tip harder, lighter, or stronger, you create pencil lines from very thin to
thick.
SYSTEM REQUIREMENTS
Windows 7 / 8 / 8.1; USB and HDMI port; CD/DVD-ROM drive or internet connection.
INSTALLING THE DRIVER SOFTWARE ON WINDOWS
If you are using Microsoft Windows 7, 8 or 8.1 operating systems:
1. Place the DVD into the optical disc drive and wait for the main installation screen to appear.
2. The main installation screen should appear automatically. If for some reason it doesn’t, you can
manually start the installation by opening 【My Computer】►【DVD ROM】►then click on
the【Setup】program.
3. When installing the driver, follow the installation instructions on screen and press the “Enter”
key. After the installation has completed, you need to reboot the computer.
4. If you do not have a CD/DVD driver, download the driver from www.uc-logic.com “Supports”
page and follow the installation instructions on screen.
→ Caution: You have to remove any existing tablet driver before installing the driver (including a
pen tablet driver from another brand.)

Penates 10.1SP Driver Version 8.0
4
VERYFYING HARDWARE
Your Penates and package contents are shown below. If anything is missing, contact your dealer
immediately.

Penates 10.1SP Driver Version 8.0
5
HARDWARE INSTALLATION
Connect your Penates with a HDMI & USB interface into the computer after you have finished the
driver installation and restarted the Windows system. If the device has been successfully installed,
you will see a small Penates icon ( ) appear in the system tray, which is normally at the lower right
corner of the screen.

Penates 10.1SP Driver Version 8.0
6
USAGE TIPS
1. Double tapping
When you double tap with the digital pen (equivalent to a double click with a mouse), try to
keep the pen tip away from the Penates screen, or at least try to lift the pen tip as fast as
possible before the second tap.
2. Scrolling function of digital pen
The digital pen has the same function as a normal mouse for scrolling pages. Just press the first
button of the digital pen (same function as the mouse middle button) over the Penates screen.
3. Using a pen without an ordinary mouse
You may install the Penates and a mouse in your computer at the same time. However, only
one device is able to work at a time. You cannot use both devices at once.
MAPPING TO MULTIPLE MONITORS
If your computer is equipped with more than one monitor, your Penates will map to the monitors
based upon how they are configured in the DISPLAY PROPERTIES control panel.
After you have correctly configured your computer for using it with multiple monitors, you can then
adjust your Penates mapping by opening the Penates panel and changing the appropriate options.
This enables you to toggle the current Penates mapping and screen cursor between the system
desktop or primary display and your other monitors.
See working with “Monitor Setting”.
→Note: Under the “Duplicate the displays”mode of the “Multiple Display” function, the display
resolution of your monitor must be the same resolution of your Penates. Otherwise, the pen cursor
will be misplaced on the screen. For Penates 10.1SP, please make sure the other monitor resolution
is 1280 x 800.

Penates 10.1SP Driver Version 8.0
7
II. Penates configuration
You may configure the Penates by modifying the functions of the pen tip and the two barrel buttons,
tap [Start] > [Settings] > [Control Panel], and double-tap the Penates icon ( ), or tap on the
Penates icon ( ) in the system tray, usually located at the lower right corner of the screen.
THE INFO TAB
The Info tab displays the version number of the driver and Tablet PC function.
1. Show Icon in System Tray
Select to show the Penates icon ( ) in the system tray.
2. Support Digital Ink
Select to support the pressure of digital ink settings.
→After the Penates driver has been installed in Windows; the Tablet PC function setting will
support pen pressure in MS Journal, OneNote (2003, 2007), etc.
→ If the Tablet PC setting is disabled, most of the art software pen’s pressure (Photoshop, Illustrator,
Corel Painter) is still working, but pen pressure will not be available when using MS Journal,
OneNote (2003、2007) , etc.

Penates 10.1SP Driver Version 8.0
8
THE BUTTON TAB
Button Name
You may re-program the functions of the pen two-barrel buttons by selecting the button name
from the drop down menu and assign a command of a traditional three-button mouse to it.
According to the mouse function, you can select no action, left click, left double click, middle
click, middle double click, right click, right double click or Pen/Eraser Toggle.
Double Click Time
Move the Speed Slider toward “Slow” if you want more time in double tapping with Pen Tip or
less time if you move the Speed Slider toward “Fast”. This setting is the same as Double-click
Speed on the page displayed by selecting Start ►Control Panel ►Mouse ►Buttons.
Changing the speed in one section is the same as changing the speed in the other tab.
Pen/Eraser Toggle
Pen/Eraser toggle function only works on supported graphics software or digital ink software.
You must select “Supports Digital Ink” option on the info tab to activate this function.
Default
Tap on the Default button to return to the manufacturer settings.

Penates 10.1SP Driver Version 8.0
9
EXPRESS KEYS DEFINE TAB
Express Keys:
For Express Keys & Scroll Ring settings, you can modify these using the Express Keys configuration
page.
Default
Return the Express Keys to the default settings.
Re-define Express keys
Select “Common”, “Mouse”, “Multimedia”, “Other”, “Run”, “Internet” and “Hot Key” tabs to
re-define the settings.

Penates 10.1SP Driver Version 8.0
10
Common
Express key name: Rename the Express Key.
Disable: Disable the Express Key name display on the Penates control panel.
Default: Return the Express Key name to the default setting.
Mouse
Mouse function: Select Mouse mode settings.

Penates 10.1SP Driver Version 8.0
11
Multimedia
Multimedia function: Select multimedia function settings: “Play/Pause”, “Stop”, “Previous”,
“Next”, “Mute”, “Volume Up”, and “Volume Down”.
Other
Your Penates work zone: Select “Largest Work Zone” or “Screen Ratio”.
Show setting: Show Express key name.

Penates 10.1SP Driver Version 8.0
12
Run
Run: Use the browser button to select a file and run, or type in a file name with the complete
path.
Start in: This is the initial folder where the program starts the execution.
Parameters: The string type will be passed to the program as parameters. For example, you
may type in a document name here and pass it to a word processing program specified in the
Run line above.

Penates 10.1SP Driver Version 8.0
13
Internet
Network function:
Select “Previous Page”, “Next Page”, “Refresh”,” Stop”, “My Favorite”, “IE”, “Email”.
Link to:
Kind of Service: Select an Internet service to start. For example: browsing a website, or
send an email. The exact program initiated (for example, the browser program) depends
on system settings.
Address: The URL address for the selected service. For example, the Website or e-mail
addresses.

Penates 10.1SP Driver Version 8.0
14
Hot Key
The key combination to press: Select any key such as alphanumeric key or cursor control key,
combined with Shift, Ctrl and/or Alt key.
Common function: Select some common used settings.
Show Desktop:When the hot-key is set to this function, simply press it to display the
desktop immediately.
Switch Application:When the hot-key is set to this function, simply press it to switch
between all the opened windows. (This function only works on the system which supports
this feature.)
3D Switch Application (Win 7/Vista):When the hot-key is set to this function, simply press
it to activate Windows Flip 3D function to quickly preview all your open windows. (This
function only works on the system which supports this feature.)
POP MENU:When the hot-key is set to this function, simply press it to activate the POP
MENU for frequently used functions.

Penates 10.1SP Driver Version 8.0
15
THE PRESSURE TAB
Pressure Test:
There are four different colors for selecting the pressure sensitivity of the Penates, and they
can be adjusted in this tab. There is a test area to see the thickness of a line by pressing down
on the pen tip to the pad. The numerical value of the pressure level is shown in the field above
the “Clear” button.
Clear
Tap on the “Clear” button to clean the space up in the Pressure Test area.
Click Sensitivity
By default setting, tapping with the pen tip is equivalent to a left click of a mouse. Move the
slider in the sensitivity bar to adjust the response of the pen tip. Light means when the pen tip
is very lightly pressed with slight pressure, and the heavy function is just the opposite. Take
some time to set up the ideal setting when using the pen.

Penates 10.1SP Driver Version 8.0
16
THE MONITOR SETTING TAB
If you are selecting the “Extend the displays”mode under the “Multiple Display”function, please
use the Penates "Monitor Setting" page to select your Penates corresponding screen number first in
order to facilitate the custmized settings.
Click “OK” when you are finished with the setting.

Penates 10.1SP Driver Version 8.0
17
THE CALIBRATION TAB
Calibration
Check “Calibration” and select”4-Point
Calibration” or “9-Point Calibration” to
activate the calibration screen.
Hold the pen 90 °vertically on the calibration screen and use the
pen tip to click on the center of the crosshairs in the calibration
dialogue.
Click “OK” to end the calibration.

Penates 10.1SP Driver Version 8.0
18
Rotate
Select the degree which you would like to rotate your Penates.

Penates 10.1SP Driver Version 8.0
19
THE MONITOR TUNER
If you are selecting the “Extend the displays”mode under the “Multiple Display”function, you may
configure the Penates monitor Brightness、Contrast and Color Temperatures.
[Start] > [All Programs] > [Tablet] > [ UC Logic Monitor Tuner ]
Brightness
You can adjust the brightness of your Penates screen by selecting “Increase” or “Decrease”.
Contrast
You can adjust the contrast of your Penates screen by selecting “Increase” or “Decrease”.

Penates 10.1SP Driver Version 8.0
20
Color Temperatures
You can select the default color temperature settings or the “User 1”to customize it.
Restore Default
Click “Restore Default” to their manufacturer settings.