UNITED DVD8900B User manual

BHD8866
USER MANUAL

Contents
1 INTRODUCTION ----------------------------------------------------------------------------------------------------------1
2 FUNCTIONAL OVERVIEW---------------------------------------------------------------------------------------------2
3 VIDEO OUTPUT CAPABILITIES-------------------------------------------------------------------------------------4
4 SETUP MENU-------------------------------------------------------------------------------------------------------------4
5 PLAYING A BD OR DVD DISK --------------------------------------------------------------------------------------7
6 MP3 /WINDOWS MEDIA AUDIO / JPEG IMAGE PLAYBACK ---------------------------------------------8
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead symbol, within an equilateral triangle, is intended the alert the
user to the presence of uninsulated dangerous voltage within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
1 INTRODUCTION
1.1 OVERVIEW
Your BD player has the capability of providing high-definition, cinema-like pictures and multichannel audio.
Soundtracks in more than one language are usually included on the disk, and subtitles in more languages are
often included as well.
1.2 PLAYABLE DISK TYPES
The following types of disks can play in the BD player: BD-ROM/BD-R/DVD-ROM/DVD+/-R(RW)/CD-ROM/
CD-R/CD-RW/VC-1/DVD/VCD/CD/VD-J/BD-HDMW/MP3/WMA/JPEG
Macrovision:
This product incorporates copyright protection technology that is protected by method claims of certain U.S
patents and other intellectual property rights owned by Macrovision Corporation, and is intended for home and
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
GB-1

2 FUNCTIONAL OVERVIEW
2.1 FRONT PANEL
1. OPEN/COLSE
2. POWER
3. VFD display
4. IR sensor
5. DISC tray
6. PLAY
7. PAUSE
8. PREV
9. NEXT
2.2 REAR PANEL
1. POWER
2. 5.1 Channel Audio Output
3. Component Video Output
5. Coaxial Output
6. Downmix L/R
7. Optical
4. Composite Video Output 8. HDMI
GB-2

2.3 REMOTE CONTROL
1. POWER
2. Numeric button
3. CLEAR
4. DISPLAY
5. SUBTITLE
6. VOL -
7. VOL +
8. TITLE
9. Left button
10.SETUP
11.Down button
12.PLAY
13.PAUSE
14.REV
15.FWD
16.A-B
17.REPEAT
18.PIP
19. S-VIDEO
20.OPEN/CLOSE
21.GOTO
22.ANGLE
23.MUTE
24.MENU
25.Up button
26.Right button
27.OK button
28.BACK
29.MISC
30.STOP
31.NEXT
32.PREV
33.SLOW
34.STEP
35.AUDIO
36.S-AUDIO
37.Colour buttons(RED/GREEN/YELLOW/BLUE)
The colour buttons may be laid out differently
depending on your area.
GB-3

3VIDEOOUTPUTCAPABILITIES
HDMI outputs : 1080p，1080i，720p ，480p/576p ，576p/576i
Component Video : 1080i ，720p , 576p , 420p NTSC/ PALSD (576i/480i)
Composite Video : NTSC/ PAL SD (576i/480i)
3.1 AUDIO OUTPUT CAPABILITIES
Each of the digital audio outputs are capable of different levels of functionality, as described in the table below.
Actual output will depend on setup menu settings, what types of audio tracks are encoded on the disk, and, for
HDMI, TV capabilities.
1) Core portion of this track will be passed to the audio receiver if the receiver has the capability to decode this
format
2) Raw digital track will be passed through to the audio receiver if the receiver has the capability to decode this
format, OR the track can be mixed with other disk audio (for example, director’s commentary or special
effects from button pushes) and then re-encoded to multichannel DTS or stereo PCM.
3) Dolby Digital Plus, Dolby TrueHD, and DTS-HD tracks can be decoded and re-encoded to
multichannel DTS and stereo PCM
4) Decoded, mixed with effects and secondary channel, and converted to Analog
4SETUPMENU
4.1 ENTERING THE SETUP MENU
After the BD player has been turned on, enter the SETUP menu by pressing the “SETUP” key on the remote.
In order to configure the BD player for proper audio and video output, press the “up/down arrow” keys on the
remote to select Language Menu , Display Menu ,Audio Menu , Parental Menu ,Speaker Menu and Sysem
Menu.
4.2 LANGUAGE MENU
From the main setup menu, press the “up/down arrow” keys on the remote to select the Language Menu. and
the following language setup screen will appear:
GB-4
4.2.1 Audio
Highlight the AUDIO Language option, and press the Arrow
buttons to choose the audio language you prefer. Press OK
button to confirm. If the disc you are playing has that language
available, it will output audio in that language.
4.2.2 Subtitle
Highlight the SUBTITLE Language option, and press the
Arrow buttons to choose the subtitle language you prefer. P
has that language available, it will displays subtitles in that language
4.2.3 Menu
ress OK button to confirm. If the disc you are playing
MENU Language option, and press the Arrow buttons to choose the menu language you prefer.
OSD LANGUAGE option, and press the Arrow buttons to choose the OSD language you prefer.
Highlight the
Press OK button to confirm. If the disc you are playing has that language available, it will displays menu in that
language
4.2.4 OSD
Highlight the

Press OK button to confirm, and it will display OSD in that language.
4.3 DISPLAY MENU
GB-5
enu, press the “up/down arrow” keys on
Color System of the TV, you can choose the
se this settings if your DVD player is connected to
this settings if your DVD player is connected to a P
will fill entire screen
ur DVD player is connected to a wide screen TV. If you choose this
r Box): Choosing this setting if your DVD player is connected to a normal ratio TV. connector
oosing this setting if your DVD player is connected to a normal ratio TV. You can fill
e display ratio is related to the recorded disc format. Some disc can not display images in the
in 4:3 format on a wide screen TV, black bars will appear on the left and right side of
ust the screen setting depending on the type of the television you have
n select different resolution. Under this condition, the VIDEO and TV TYPE are both invalid.
tput with different resolution from the normal video output (1080I,720P,480P
for your BD player to change the color.
or off for 24 frames/second output format. from the display menu,
.4 AUDIO MENU p menu, press the “up/down arrow” keys on
l output, from the audio setup menu,
From the main setup m
the remote to select the DISPLAY Menu. and the following
language setup screen will appear:
4.3.1 TV Type
According to the
TV System.
NTSC: Choo
a NTSC TV.
PAL: Choose AL TV.
4.3.2 TV Aspect
16 : 9 Full: Movie
16 : 9 Pillarbox: Choose this setting if yo
setting and you don’t have a wide screen TV, the images on the screen may appear distorted due to vertical
compression.
4 : 3 LB (Lette
You’ll see the movies in their original aspect ratio (height-to-width ratio). You’ll see the entire frame of the movie,
but it will take up a smaller portion of the screen vertically. The movie might appear with black bars at the top
and bottom of the screen.
4 : 3 PS (Pan & Scan): Ch
the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges)
won’t be seen.
Notes:The imag
aspect ratio you choose.
If you play a disc recorded
the screen.
You must adj
4.3.3 Resolution
In this option, you ca
The default set is HDMI AUTO
You can change to the HDMI ou
/576P,480I/576I,1080P)
4.3.4 Color Space
Choosing this setting
4.3.5 Film Mode
To set film mode on
4
From the main setu
the remote to select the AUDIO Menu. and the following
language setup screen will appear:
4.4.1 Digital Output
To set the player’s digita

GB-6
outputs to one of the following nfirm
PCM sampling rate, from the audio setup menu, press the arrow keys on
z
this setting to adjust the line out ratio and get different effect. If adjusting to
ignores the dialog normalization setting in a Dolby soundtrack or not, from
.5 SPEAKER MENU aker configuration, from the main setup
screen will
t L-R row keys to set the player’s output frequency
arge” [front speakers have subwoofers].
by
s to set the player’s output frequency response and downmixing characteristics by
keys to set the player’s output frequency response and downmixing characteristics
icate to the BD player your Bass (Subwoofer’s) frequency response.
.6 PARENTAL CONTROL ntrol password, from the main setup menu, press the up/down arrow keys on
press the arrow keys on the remote until the yellow square is next to the “Digital Output” menu choice.
the Arrow buttons t can then be used to set the digital audio
-PCM Stereo,-Passthru,-Passthru Core,-Re-Encode DTS,-PCM 5.1 Press OK button to co
4.4.2 PCM Downsampling
To set the player’s digital output
the remote until the yellow square is next to the “PCM Downsampling” menu choice.
The Arrow buttons keys can then be used to select one of the following options. -48 Kh
-96 Khz OFF Press OK button to confirm
4.4.3 Dynamic Range Control
When “ON” is selected, choose
FULL, the audio signal peak value will be the minimum; while adjusting to OFF.
4.4.4 Dialog Normalization
To set whether the BD player’s
the audio setup menu, press the arrow keys on the remote until the yellow square is next to the “Dialog
Normalization” menu choice. The Arrow buttons keys can then be used to select one of the following
Options on,off, Follow
4
To set the player’s spe
menu, press the up/down arrow keys on the remote until the
yellow square is next to the “Speaker Menu” choice.
Press the ‘OK key on the remote, and the following
appear:
4.5.1 Fron
Use the Arrow ar
response and downmixing characteristics by setting the front
speakers to “Small” [Front speakers have no subwoofers] or “L
4.5.2 Center
Use the Arrow arrow keys to set the player’s output frequency response and downmixing characteristics
setting the center speaker to “Small” [Center speaker has no subwoofers] or “Large” [center speaker has
subwoofers], or “Off” [no center speaker].
4.5.3 Surround L-R
Use the Arrow arrow key
setting the surround speakers to “Small” [surround speakers have no subwoofers] or “Large” [surround
speakers have subwoofers], or “Off” [no surround speakers].
4.5.4 Subwoofer
Use the left/right arrow
by setting the subwoofer to “On” [Subwoofer Present] or “Off” [no subwoofer].
4.5.5 Bass Crossover
Use this menu item to ind
4
To set the player’s parental co

the remote until the yellow square is next to the “Parental Control” menu choice.
Press the ‘OK key on the remote, and the following screen will
GB-7
appear:
You may enter any 4-digit number, which must be re-entered in
following screen will
are done entering the parental control password, you will
.7 SYSTEM MENU You can know the voftware version of
ion You can know the Loader version of current
set Settings Choose this option to resume all the setup
PLAYINGABDORDVDDISK
order to change the parental control settings.
As you enter the parental control password, the
appear:
Once you
be automatically returned to the main menu.
4
4.7.1 Software Version
current software
4.7.2 Loader Vers
Loader
4.7.3 Re
options to default settings.
4.7.4Clear BD Storage
5
5.1 PLAYING A BD OR DVD DISC
Video Control During Playback
Controlling the video playback involves the following keys on the remote:
sume the play from the point at which you stopped last time, if you press the STOP key once.
the movie (and see a still picture), press PAUSE the key during playback.To step forward to the next
, the speedwill
key
eedwill
STOP
You can re
PAUSE
To pause
framepicture,Toresumenormalplayback,pressPLAY.
FWD
searching.Press the FF again to increase the searching speed. Each time the FF key is pressed
increase through the following sequence:1x,2x,3x,4x,5x,6x,7xTo resume normal (1x forward) playback at any
time,pressthePLAYkey
SLOW
slow-motion effects.Press the < SLOW > key again to increase the slow-motion speed. Each time the < SLOW >
key ispressed, the slow-motion speed will increase through the following sequence:Slow Forward
SLOW_1,SLOW_2,SLOW_3,To resume normal (1x forward) playback at any time, press the PLAY
REV
To search the contents of the disk at a fast reverse speed, press the FR key for fastforward/backward
searching.Press the FR again to increase the searching speed. Each time the FR key is pressed, the sp
increase through the following sequence:1x,2x,3x,4x,5x,6x,7xTo resume normal (1x forward) playback at any
time,pressthePLAYkeyDiskAngles
Subtitles
If the disk contains multiple subtitles, you can select the subtitle you want by pressing the subtitles key on your

GB-8
with multiple audio languages or audio tracks, you can select one of the languages
und output. Press the MUTE key again to remove the mute.
e or more titles , and each title may have one or more chapters. This depends on
TITLE key on the remote control to turn back to the title menu during playback.
watch another chapter during playback, press MENU/PBC key to turn back to the chapter
MP3/WINDOWSMEDIAAUDIO/JPEGIMAGEPLAYBACK
remote control.
Audio languages
If the DVD is recorded
on the disk by pressing the Audio key on your remote control.
Audio control during playback
Press the MUTE key to mute the so
Press the VOLUME + or VOLUME - to adjust the loudness.
Playing title/chapter
A DVD disc may have on
the content (a movie, video clips, a drama series, etc) on the disc.
Playing a title
you can press the
Playing a chapter
Any time you want to
menu and choose it again, if not, please press the PREV/NEXT key to do it.
6
6.1 INTRODUCTION
This section explains how to use the MWJ (Mp3/Windows Media/Jpeg) Audio and Image Player on the
RTED FOR MWJ SYSTEM er:
(MP3 and WMA files only)
rd, Rewind, Repeat
ist
t
PEG Photo Viewer/Image Player:
y
n Image, Rotate Image
ith background music
.3 SIMPLE MP3/WMA AUDIO PLAYBACK
with a data disk containing MP3, WMA, and/or JPEG files will automatically invoke the
97440-REFx platform.
6.2 FEATURES SUPPO
The following features are supported by the MWJ play
Audio Player:
Music Play
Music Pause, Resume, Stop, Fast Forwa
Skip Next Song, Skip Previous Song
• Playlist:
o Create Playlist
o Add files to Playl
o Add folders to Playlis
o Shuffle Playlist
J
Image Display
Thumbnail Displa
Zoom-In, Zoom-Out, Pa
Image Slideshow
Image Slideshow w
6
6.3.1 Audio Play
Inserting a data CD
MWJ subsystem.

GB-9
disk using the ‘RIGHT’, ‘LEFT’, ‘UP’ and ‘DOWN’ navigation keys on the remote to
n a desired Audio File (MP3 or WMA). Playback of the audio file will begin, and the ID3
ENU’ key to invoke the pop-up menu for the desired audio file. Select the ‘Play’ option in the menu
ugh the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ and ‘DOWN’ navigation keys to the desired
NU’ key to invoke the pop-up menu for a folder
Navigate through the
the desired audio file.
Option 1
Press ‘OK’ o
information will be displayed on the screen.
Option 2
Press the ‘M
as shown in the figure below. Playback of the audio file will begin; and the ID3 information will be displayed on
the screen.
Option 3
Navigate thro
folder.
Press the ‘ME . Select the ‘Play Audio Files’ option in the menu as
ist is reached.
4 CREATING AN AUDIO PLAYLIST
ey to invoke the pop-up menu for the audio file while viewing the disk contents. Select the
ey.
.4.1 Adding Files to the Playlist igate through the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ and
or the selected audio file while viewing the disk contents.
the
the ‘Add to play list’ option from the sub pop-up and press ‘RIGHT’ Navigation key. Select ‘This’ option
.4.2ViewingFilesinthePlaylist
the audio file. Select the ‘Play List’ option in the menu
as shown in the figure below, and press the ‘RIGHT’
navigation key. This will invoke a sub pop-up. Select
the ‘View Play list’ option from the sub pop-up and
shown in the figure below. Playback of the first audio file in the selected folder will begin.
At the end of the current song, playback of the next song will begin until the end of the playl
Pressing ‘LEFT’ only the first level pop-up will exit from the pop-up view completely.
6.
Create a Playlist
Press the ‘MENU’ k
‘Play List’ option in the menu as shown in the figure below, and press the ‘RIGHT’ navigation key. This will
invoke a sub pop-up, select the ‘Add to play list’ option from the sub pop-up and press ‘RIGHT’ Navigation k
Select ‘This’, ‘All’ or ‘Select’ option from the third level pop-up to add files to the Playlist. Adding even a single
file to the playlist will create the playlist. Only a single playlist can exist in the MWJ player.
6
To add a single file to the playlist, nav
‘DOWN’ navigation keys to the desired audio file.
Press the ‘MENU’ key to invoke the pop-up menu f
Select the ‘Play List’ option in the menu as shown in
the figure below, and press the ‘RIGHT’ navigation
key. This will invoke a sub pop-up. Select the ‘Add to
play list’ option from the sub pop-up and press
‘RIGHT’ Navigation key. Select ‘This’ option from
third.
Select
Play
t Add to Play List TPlay Lis his
Set As BGM View Play List All
Select
from the third level pop-up to add the selected file to the playlist.
6
Select any WMA or mp3 audio file in the disk’s folder to invoke the audio menu option.
Press the ‘MENU’ key to invoke the pop-up menu for Play
Play List Add to Play List This
Set As BGM View Play List All
Select

GB-10
all t dded to the ay list.
ing t ew t p
oke the menuoption.
emove the selected file from the playlist. Select ‘All’ option from the third level pop-up to
hoose the ‘Select’ option from the third level pop-up. This will display the
his will invoke a sub pop-up. Select the ‘Normal’ option from the sub pop-
in the order that they were
d). Once the Normal option is
were a
t the io
y. This w up
ongs the playlist. Once
playlist playback
and not in the order they were added
the ‘Repeat’ or ‘Loop’ option from the sub pop-up and press ‘OK’. This will
set the playlist in repeat mode. During the playlist playback, a single song or all the songs with which the
playback was started will continuously be played back.
press ‘OK’ This will invoke the play list view, displaying
6.4.3RemovingFilesfromthePlaylist
The files in the play list can only be deleted when view
section of the manual.
To remove files from the playlist:
Select any mp3 or WMA audio file in the playlist view to inv
Press the ‘MENU’ key to invoke the pop-up menu for the audio file. Select the ‘Play List’ option in the menu as
he files a pl
he she playlist. To vi he playlist refer to t reviou
shown in the figure below, and press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select the
‘Remove from Play List’ option from the sub pop-up and press ‘RIGHT’ Navigation key. Select ‘This’ option from
the third level pop-up to r
remove all files in the playlist folder. C
playlistcontentswitha‘checkbox’option.
Navigate through the content using the ‘RIGHT’,
‘LEFT’, ‘UP’ and ‘DOWN’ navigation keys to the
desired audio file. Press ‘OK’ on the desired
audio file to check the audio file. Navigate again
Play
Set Play Mode _
Set Audio Mode _
toselectotherfilestoremovefromtheplaylist.
Pressing ‘OK’ on a checked audio file cause it
tobecome“un-checkied”.
Once all the selections have been made; press
the ‘MENU’ key to remove the selected audio
filesfromtheplaylist.
Pressing ‘CANCEL’ without committing will disregar lected files.
Play list Remove from Play This
List
d all the se
All
Select
6.4.4 Setting the Play Mode for the Playlist
Setting the Playlist in Normal Mode:
Press the ‘MENU’ key to invoke the pop-up menu in the playlist folder. Select the ‘Set Play Mode’ option in the
menu as shown in the figure below, and press the ‘RIGHT’ navigation key.up Play
TSet Play Mode Normal
and press ‘OK’. This will arrange the songs back Set Audio Mode Shuffle
added to the playlist (If previously shuffle
selected the user will be able to see the original order in the playlist once
again. During playlist playback the order of the songs will be in the order they
Set the Playlist in Shuffle Mode:
Press the ‘MENU’ key to invoke the pop-up menu in the playlist folder. Selec
menu as shown in the figure below, and press the ‘RIGHT’ navigation ke
the ‘Shuffle’ option from the sub pop-up and press ‘OK’. This will shuffle the s
the Shuffle option is selected the user will be able to see the shuffle order in the playlist. During
Play list
dded.
‘Set Play Mode’ opt n in the
ill invoke a sub pop- . Select
randomly in
the order of the songs will be shuffled Play
Set Play Mode
Set Audio Mode None
Play list Repeat
to the playlist.
Setting the Playlist in Repeat Mode or in Loop Mode
Press the ‘MENU’ key to invoke the pop-up menu in the playlist folder.
Select the ‘Set Audio Mode’ option in the menu as shown in the figure below,
and press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select Loop

6.5 JPEG IMAGE PLAYER MANUAL
GB-11
’ the
N’ navigation keys to the desired
ey to invoke the pop-up menu for the image file. Select
roperties of the selected image file, such as camera model,
ent in the JPEG file).
operties can also be viewed while displaying the image.
NU’ key to invoke the pop-up menu for the image file in image display mode. Select the
he
NU’ key to invoke the pop-up menu. Select the ‘Rotate’ option in the menu as shown in the figure
up.
egrees.
pop-up menu. Select the ‘Rotate’ option in the menu as shown in the
k w
e by 180, 270 and 360 de
ly while viewing the image. The image can zoomed up to 5 levels.
n be done using the ‘RIGHT’, ‘LEFT’, ‘TOP’ and ‘BOTTOM’ navigation keys
6.5.1 Image Play
Navigate through the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ and ‘DOWN
image file.
6.5.2 Viewing the Image Properties
Navigate through the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ and ‘DOW
image file.
navigation keys to desired
Option 1
Press the ‘MENU’ k StartSlideShow ＞
Rotate ＞
the ‘Properties’ option in the menu as shown in below figure. This will
display the p
Properties ＞
resolution, etc (if this information is pres
Option2
The image pr
Press the ‘ME
‘Properties’ option in the menu as shown in below figure. This will display t
file like camera model, resolution etc if information is present. properties of the selected image
6.5.3 Rotating, Panning, and Scaling the Image
Rotating the Image Clockwise
Press the ‘ME
below, and press the ‘RIGHT’ navigation key. This will invoke a sub pop- Start Slide Show
Rotate Right
Properties Left
Select the ‘Right’ option from the sub pop-up and press ‘OK’. This will rotate
the image in the clockwise direction by 90 degrees.
Follow the steps above to rotate the image by 180, 270, or 360 d
Rotating the Image Counterclockwise
Press the ‘MENU’ key to invoke the
figure below, and press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select the ‘Left’ option
from the sub pop-up and press ‘OK’. This will rotate the image in the anti cloc
degrees.
Follow the step above to subsequently rotate the imag
ise direction by 90
grese.
Zooming the Image
The image files can be zoomed in/out on
PAN Image
The image file can be panned in the left, right, top and bottom direction only when the image has been
“zoomed in”.
Panning ca

GB-12
.6 SLIDE SHOW PLAYER MANUAL
.6.1 Starting, Stopping, and Controlling the Slide Show
ress the ‘MENU’ key to invoke the pop-up menu for the image file. Select the
tart Slide Show’ option in the menu as shown in the figure below, and press
e ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select any one of
e 6 effects options displayed (Blend, Film, Shutter, Fade, Curtain and None)
om the sub pop-up and press ‘OK’. This will start the slide show from the
d above. w will start again
6
6
PPlay
‘S Start Slide Show Blend
th Properties Film
th
fr
selected image file with the effect selecte
After displaying all the image files in the disk, the slide sho
from the first image file.
Note: Press the ‘LEFT’ navigation key to exit the current level of the pop-up me
first level pop-up will exit from the pop-up view completely.
Starting the Slide Show – Option 2
Navigate through the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ and ‘DO
folder.
nu
WN’ n vigation keys to the d
tart Slide Show’ option in t
, and press ‘OK’. This will start the slide show from the first image file prese
Starting iewing an image.
below, and press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select the any one of the
sition Effect g the
om the sub pop-up and press ‘OK’. This will change the slide
ing
nd
elect
conds,
press ‘OK’ to
ill always start with the
above.
. Pressing ‘LEFT’ on the
a esired
Press the ‘MENU’ key to invoke the pop-up menu for the folder. Select the ‘S
as shown in the figure below he menu nt in the
selected folder with the default Blend effect.
the Slide Show -Option 3
The slide show can also be started while v
Press the ‘MENU’ key to invoke the pop-up menu. Select the ‘Start Slide Show’ option in the menu as shown in
the figure
6 effects options displayed (Blend, Film, Shutter, Fade, Curtain and None) from the sub pop-up and press ‘OK’.
This will start the slide show from the next image file with the effect selected above.
6.6.2 Changing the Slide Show Tran
Press the ‘MENU’ key to invoke the pop-up menu while viewin
slide show. Select the ‘Slide Show Effect’ option in the menu as
shown in the figure below, and press the ‘RIGHT’ navigation key.
This will invoke a sub pop-up. Select the any one of the 6 effects
options displayed (Blend, Film, Shutter, Fade, Curtain and None)
fr
show effect from the current to the selected effect.
6.6.3 Setting the Duration between Images
The first time the image duration is set, the slide show must be runn
Press the ‘MENU’ key to invoke the pop-up menu. Select the ‘Slide
Show Duration’ option in the menu as shown in the figure below, a
press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. S
any one of the displayed durations (3 seconds, 5 seconds, 10 se
and 30 seconds, 1 minute, 5 minutes, 30 minutes) and
art the slide show with that particular duration.
.
st
Once the duration has been set, the slide show w
selected duration until changed using the steps
Shutter
Fade
Curtain
None
Slide Show Effect Blend
Slide Show Duration Film
Slide Show BGM Shutter
Fade
Curtain
None
Slide Show Effect
Slide Show Duration 3s
Slide Show BGM 5s
10s30s
1min
5min
30min

GB-13
d ‘DO o the desired
le.
and
ct
t the selected audio file to
ction will replace the
d selection. Only 5 songs can be selected to be set as background songs.
M’ op s sh wn in
p f
. U be sel
ys start with the selected
t mode until the slid
stopped ile the slide show is already in motion. s
d under license under U.S.Patent#'s:5,451,942;5,956,674;5,974,380;
e reserve the right to revise this document without prior notice.
6.6.4 Setting a Background Song for the Slide Show
Navigate through the disk contents using the ‘RIGHT’, ‘LEFT’, ‘UP’ an
audio file.
Press the ‘MENU’ key to invoke the pop-up menu for the desired audio fi
Select the ‘Set as BGM’ option in the menu as shown in the figure below,
then press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Sele
any one of the 5 places and press ‘OK’. This will se
WN’ navigation keys t
Play
Add to Play Li st
Set As BGM NONE
be played back during slide show.
If an audio file already occupies the location, the new sele
ol
6.6.5 Starting the Slide Show with a Background Song
The first time the slide show is started with background music, the slide show must already be in motion.
Press the ‘MENU’ key to invoke the pop-up menu. Select the ‘Slide Show BG
the figure below, and press the ‘RIGHT’ navigation key. This will invoke a sub po
displayed songs and press ‘OK’ to start the slide show with that particular song
Once the background song has been selected and set, the slide show will alwa
tion in the menu a
-up. Select any one o o the
p to 5 songs can ected.
song.
Once the end of song is encountered, the same song will be played in repea e show
is
The slide show background song can only be switched off wh
Press the ‘MENU’ key to invoke the pop-up menu. Select the ‘Slide Show BGM’ option in the menu a
shown in the figure below, and press the ‘RIGHT’ navigation key. This will invoke a sub pop-up. Select
the ‘NONE’ option and press ‘OK’ to start the slide show with no background song.
Manufacture
5,978,762;6,487,535 & other U.S.and worldwide patents issued & pending.DTS is a
registered trademark and the DTS logos,Symbol,DTS-HD and DTS-HD Advanced Digital
Out are trademarks of DTS,Inc ©1996-2008 DTS,Inc.All Rights Reserved.
w
NONE
NONE
NONE
NONE

DVD8900B
Bruksanvisning

Innhold
1 Innledning------------------------------------------------------------------------------------------------------------------------1
2 OVERSIKT OVER FUNKSJONER ---------------------------------------------------------------------------------------2
3 VIDEOUTGANGSMULIGHETER -----------------------------------------------------------------------------------------4
4 OPPSETTMENY --------------------------------------------------------------------------------------------------------------4
5 SPILLE EN BD- ELLER DVD-PLATE ------------------------------------------------------------------------------------7
6 AVSPILLING AV BILDER FRA MP3 / WINDOWS MEDIA-LYD / JPEG ----------------------------------------8
Sikkerhet
Denne bruksanvisningen inneholder all informasjon du trenger for installasjon og bruk av den nye TV-en. Les
bruksanvisningen nøye, og oppbevar den på et praktisk sted for senere bruk.
ADVARSEL: APPARATET MÅ IKKE EKSPONERES FOR REGN ELLER FUKT - FARE FOR BRANN PÅ
GRUNN AV KORTSLUTNING OG ELEKTRISK STØT.
VIKTIG: IKKE FJERN DEKSELET (ELLER BAKPANELET) - FARE FOR ELEKTRISK STØT -
APPARATDEKSELET SKJULER INGEN KOMPONENTER SOM KREVER VEDLIKEHOLD FRA BRUKEREN.
LA GODKJENT PERSONELL STÅ FOR ALL SERVICE.
Advarselsymbolet i form av et lyn med pilspiss i en likesidet trekant betyr at det innenfor
produktets deksel finnes frilagte, strømførende komponenter, med så sterk spenning at det kan
føre til personskader pga. elektrisk støt.
Et utropstegn i en likesidet trekant betyr at det er viktige anvisninger når det gjelder funksjon og
vedlikehold (service) i dokumentene som følger med apparatet.
1 INNLEDNING
1.1 OVERSIKT
Din BD-spiller har mulighet til å gi bilder i HD-kvalitet som på kino og lyd i flere kanaler. Lydspor på mer enn ett
språk er vanligvis inkludert på disken, og undertekst på flere språk er også ofte inkludert.
1.2 SPILLBARE DISKTYPER
Følgende disktyper kan spilles i BD-spilleren: BD-ROM/BD-R/DVD-ROM/DVD+/-R(RW)/CD-ROM/
CD-R/CD-RW/VC-1/DVD/VCD/CD/VD-J/BD-HDMW/MP3/WMA/JPEG
Macrovision:
Dette produktet inneholder copyright-beskyttelsesteknologi som er beskyttet av patentrettigheter i USA og
andre åndsverksrettigheter som tilhører Macrovision Corporation, og det er bare beregnet for bruk hjemme og i
andre begrensede visningsmiljøer, hvis ikke annet er godkjent av Macrovision Corporation. Reverse
engineering (omvendt utvikling) eller demontering er ikke tillatt.
Produsert med lisens fra Dolby Laboratories.
NO-1
Dolby og dobbel-D-symbolet er varemerker for Dolby Laboratories.

2 FUNKSJONSOVERSIKT
2.1 FRONTPANEL
1. OPEN/CLOSE (åpne/lukke) (på/av)
2. POWER
3. VFD-display
4. IR-sensor
5. DISK-skuff
6. PLAY
7. PAUSE
8. PREV (forrige)
9. NEXT (neste)
2.2 BAKSIDEPANEL
1. POWER (på/av)
2. 5.1-kanal for lydutgang
3. Utgang for komponentvideo
4. Utgang for komposittvideo
5. Koaksialutgang
6. Nedmiksing L/R
7. Optisk
8. HDMI
NO-2

2.3 FJERNKONTROLL
1. POWER (på/av)
2. Numerisk knapp
3. CLEAR (slett)
4. DISPLAY (vis)
5. SUBTITLE (undertekst)
6. VOL - (volum ned)
7. VOL + (volum opp)
8. TITLE (tittel)
9. Venstre-knapp
10. SETUP (oppsett)
11. Ned-knapp
12. PLAY (spill av)
13. PAUSE
14. REV (tilbake)
15. FWD (fremover)
16. A-B
17. REPEAT (gjenta)
18. PIP
19. S-VIDEO
20. OPEN/CLOSE (åpne/lukke)
21. GOTO (gå til)
22. ANGLE (vinkel)
23. MUTE (lyd av)
24. MENU (meny)
25. Opp-knapp
26. Høyre-knapp
27. OK-knapp
28. BACK (tilbake)
29. MISC (forskjellig)
30. STOP
31. NEXT
32. PREV (foregående)
33. SLOW (langsomt)
34. STEP (trinnvis)
35. AUDIO (lyd)
36. S-AUDIO
37. .Fargede knapper
(RØD/GRØNN/GUL/BLÅ)
De fargede knappene kan være plassert
forskjellig avhengig av ditt område.
NO-3

3 EGENSKAPER FOR VIDEOUTGANG
HDMI-utganger: 1080p, 1080i 720p, 480p/576p, 576p/576i
Komponentvideo: 1080i, 720p, 576p, 420p, NTSC/ PAL SD (576i/480i)
Komposittvideo: NTSC/ PAL SD (576i/480i)
3.1 EGENSKAPER FOR LYDUTGANG
Hver av de digitale lydutgangene har mulighet for funksjonalitet på forskjellige nivåer, slik det er beskrevet i
tabellen under. Faktisk resultat vil avhenge av innstillingene på oppsettmenyen, hvilke typer lydspor som er
kodet på disken og, for HDMI, TV-egenskapene.
1) Kjernedelen av dette sporet vil sendes til lydmottakeren hvis mottakeren har mulighet til å dekode dette
formatet.
2) Digitalt raw-spor vil sendes gjennom til lydmottakeren hvis mottakeren har mulighet til å dekode dette
formatet, ELLER sporet kan mikses med annen disklyd (for eksempel dirigentens kommentar eller
spesialeffekter fra knapper som trykkes) og deretter rekodes til flerkanals DTS eller stereo PCM.
3) Dolby Digital Plus-, Dolby TrueHD- og DTS-HD-spor kan dekodes og rekodes til flerkanals DTS og
stereo PCM
4) Dekodet, mikset med effekter og sekundærkanal, og konvertert til analog
4 OPPSETTMENY
4.1 GÅ INN I OPPSETTMENYEN
Etter at BD-spilleren er slått på, går du inn i innstillingsmenyen ved å trykke tasten SETUP på fjernkontrollen.
For å konfigurere BD-spilleren for riktig lyd- og videoresultat, trykker du tastene med opp-/ned-pilen på
fjernkontrollen og velger språkmenyen (Language Menu), display-menyen (Display Menu), lydmenyen (Audio
Menu), foreldrestyringsmenyen (Parental Menu), høyttalermenyen (Speaker Menu) menyen for andre
funksjoner (Sysem Menu).
4.2 SPRÅKMENYEN
Fra hovedoppsettmenyen trykker du tastene med opp-/ned-pilen på fjernkontrollen for å velge Språkmenyen,
og følgende oppsettskjerm for språk vil komme frem:
NO-4
4.2.1 Lyd
Marker alternativet LYD-språk, og trykk på piltastene for å
velge det lydspråket du ønsker. Trykk på OK for å bekrefte.
Om språket finnes på disken du spiller av, vil den sende ut
lyden på dette språket.
4.2.2 Undertekst
Marker alternativet UNDERTEKST-språk, og trykk på
piltastene for å velge det undertekstspråket du ønsker. Trykk på OK for å bekrefte. Om språket finnes på
disken du spiller av, vil den vise underteksten på dette språket.
4.2.3 Meny
Marker alternativet MENY-språk, og trykk på piltastene for å velge det menyspråket du ønsker. Trykk på OK for
å bekrefte. Om språket finnes på disken du spiller av, vil den vise menyen på dette språket.
4.2.4 OSD (On Screen Display)
Marker alternativet OSD-språk, og trykk på piltastene for å velge det OSD-språket du ønsker. Trykk OK-
knappen for å bekrefte, og den vil vise OSD på dette språket.

4.3 DISPLAY-MENY
Fra hovedoppsettmenyen trykker du tastene med opp-/ned-pilen på fjernkontrollen for å velge DISPLAY-
menyen, og følgende oppsettskjerm for språk vil vises:
4.3.1 TV-type
Du kan stille inn fargekodesystemet for din TV.
NTSC: Velg denne innstillingen hvis DVD-spilleren kobles til
en NTSC-TV.
PAL: Velg denne innstillingen hvis DVD-spilleren kobles til en
PAL-TV.
4.3.2 TV-aspekt
16 : 9 Full: Filmen vil fylle hele skjermen
16 : 9 Søylevisning: Velg dette alternativet hvis DVD-spilleren er tilkoblet en TV i bredformat. Hvis men velger
bredformat uten at TV-en kan vise bredformat, kan bildene på skjermen bli deformert ved sammentrykking
sideveis.
4 : 3 LB (Letter Box): Velg denne innstillingen hvis DVD-spilleren er koblet til en TV med vanlig sideforhold.
Du vil se filmene i deres opprinnelige format (opprinnelig forhold mellom høyde og bredde). Du vil se hele
rammen på filmen, men den vil ta opp en mindre del av skjermen vertikalt. Filmen vil kanskje vises med svarte
stolper øverst og nederst på skjermen.
4 : 3 PS (panorer og søk): Velg denne innstillingen hvis DVD-spilleren din er tilkoblet et TV-apparat med
normalt forhold mellom sidene. Du kan vise filmen på hele TV-skjermen. Dette kan bety at deler av bildet
(venstre og høyre kant) ikke vil være synlig.
Merk: Sideforholdet i bildet er knyttet til det innspilte diskformatet. Noen plater kan ikke vise bilder i det
sideforholdet du velger.
Hvis du spiller av en plate som er innspilt i formatet 4:3 på en bredskjerm-TV, vises det svarte stolper på
venstre og høyre side av skjermen.
Du må justere skjerminnstillingene etter hvilken type TV du har.
4.3.3 Oppløsning
Under dette alternativet kan du velge forskjellige oppløsninger. Under dette vilkåret er både VIDEO- og TV-
TYPE ugyldig. Standarden er satt til HDMI AUTO.
Du kan endre til den HDMI-utgangen som har forskjellig oppløsning fra normal videoutgang (1080I, 720P,
480P/576P, 480I/576I, 1080P)
4.3.4 Fargerom
Velg denne innstillingen for BD-spilleren din for å endre farge.
4.3.5 Filmmodus
Sette filmmodus av eller på for et utdataformat på 24 bilder/sekund fra DISPLAY-menyen,
4.4 LYDMENY
Fra hovedoppsettmenyen trykker du tastene med opp-/ned-pilen på fjernkontrollen for å velge LYD-menyen,
og følgende oppsettskjerm for språk vil vises:
4.4.1 Digital utgang
Når du skal stille inn spillerens digitale utgang, går du fra
lydoppsettmenyen, trykker piltastene på fjernkontrollen inntil den
gule firkanten er ved siden av menyvalget Digital utgang.
Pilknappene kan da benyttes til å stille inn de digitale
NO-5