Panasonic DMP-BDT330 User manual

VQT4V26
until
2013/01/15
Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT330
DMP-BDT230
Thank you for purchasing this product.
Please read these instructions carefully before using this product, and save this manual for future use.
If you have any questions, contact:
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
Register online at www.panasonic.com/register (U.S. customers only)
Firmware updates
Panasonic is constantly improving the unit’s firmware to ensure
that our customers are enjoying the latest technology.
Panasonic recommends updating your firmware as soon as you
are notified.
For details, refer to “Firmware updates” (>16) or
http://panasonic.jp/support/global/cs/ (This site is in English only.)
Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-BDT330.
PPC
DMP-BDT330_230_VQT4V26_eng.book 1 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

2VQT4V26
Getting started
IMPORTANT SAFETY
INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions onthe unit and the applicable safety
instructions listed below. Keep these operating instructions handy for
future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and
a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
CAUTION
CAUTION : TOREDUCETHERISKOFELECTRIC
SHOCK,DONOTREMOVESCREWS.
NOUSER-SERVICEABLEPARTS
INSIDE.
REFERSERVICINGTOQUALIFIED
SERVICEPERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
RISK OF ELECTRIC SHOCK
DONOT
OPEN
THE FOLLOWING APPLIES IN THE U.S.A.
AND CANADA
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of this device.
Contains FCC ID : NKR-P1
Contains IC ID : 4441A-P1
This transmitter must notbe co-located or operated in conjunction
with any other antenna or transmitter.
This productis restricted to indoor use due to its operation in the
5.15 to 5.25 GHz frequencyrange.
FCCandICrequirethisproducttobeusedindoorsforthefrequency
range 5.15 to 5.25GHz to reduce the potential forharmful
interference to co-channel Mobile Satellite systems. High power
radars are allocated as primary users ofthe 5.25 to 5.35 GHz and
5.65 to 5.85 GHz bands. These radar stations can cause
interference with and/ordamage this product.
This equipment complies with FCC/IC radiation exposure limits set
forth for anuncontrolled environmentand meets the FCC radio
frequency(RF)ExposureGuidelinesinSupplementCtoOET65and
RSS-102of the IC radio frequency (RF) Exposurerules. This
equipment has very low levels of RF energy that is deemed to
comply without maximum permissive exposure evaluation (MPE).
But it is desirable that itshould be installed and operated keeping
the radiator at least 20cm (7 7/8q) or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 ofthe FCC Rules.
Theselimits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates,uses and can radiate radio frequency energy and, if not
installed and usedin accordance with the instructions,may cause
harmful interference toradio communications.However, there isno
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipmentinto an outlet on a circuit different from
that to which the receiver is connected.
≥
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached
installation instructions and use only shielded interface cables when
connecting to peripheraldevices.
Any changes or modifications not expressly approved by the party
responsibleforcompliancecouldvoidtheuser’sauthoritytooperate
this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interferencereceived,including
interference that may cause undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMP-BDT330
DMP-BDT230
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way, Secaucus,NJ 07094
Support Contact:
Panasonic Consumer Marketing Company of North America
Telephone No.: 1-800-211-PANA (7262)
DMP-BDT330_230_VQT4V26_eng.book 2 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

3
VQT4V26
Precautions
Unit
To reducethe risk of fire, electric shock or product damage,
≥Do not expose this unit to rain, moisture, dripping or splashing.
≥Do not place objects filled with liquids, such as vases, on this unit.
≥Use only the recommended accessories.
≥Do not remove covers.
≥Do not repair this unit by yourself. Refer servicing to qualified
service personnel.
AC power supply cord
≥Thepowerplugisthedisconnectingdevice.Installthisunitso that
the power plug can be unplugged from the socket outlet
immediately.
Small object
≥Keep the Memory Card out of reach of children to prevent
swallowing.
Unit
≥This unit utilizes a laser. Use of controls or adjustments or
performanceof procedures other than those specified herein may
result in hazardous radiation exposure.
≥Donotplacesourcesofnakedflames,suchaslightedcandles,on
this unit.
Placement
To reducethe risk of fire, electric shock or product damage,
≥Do not installor place this unit in a bookcase,built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
≥Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
≥Do notplace the unit on amplifiers/receivers or equipment that
may become hot. The heat can damage the unit.
Batteries
Mishandlingof batteries can cause electrolyte leakage, which can
damage items the fluid contacts and maycause a fire.
≥Dangerofexplosionifbatteryisincorrectlyreplaced.Replaceonly
withthe type recommended by the manufacturer.
≥Whendisposingthebatteries,pleasecontactyourlocalauthorities
or dealer and ask for the correctmethod of disposal.
≥Do not mix old and new batteries or different types at the same
time.
≥Do notheator exposeto flame.
≥Do not leave the battery(ies) in a car exposed to direct sunlight for
a long period of time withdoors and windows closed.
≥Do not take apart or short circuit.
≥Do notattempt to recharge alkaline or manganesebatteries.
≥Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
The following limits are in place regarding the usageof this unit. You
must be aware ofthese limits before using thisunit.
Panasonic will in no way be responsible for any incidental damage
which may arise due to a failure to obey theselimits, or to any
condition of use or disuse of thisunit.
≥Data transmitted and received over radio waves may be
intercepted and monitored.
≥This unit contains delicate electronic components.
Please use this unit in the manner in which it was intended and
follow the following points:
– Do not expose this unit to hightemperatures ordirect sunlight.
– Do not bend, or subject this unit to strong impacts.
– Keepthis unit away from moisture.
– Do not disassemble or alter this unit in any way.
This unit adopts the following technology for copyright protection.
Cinavia Notice
This product uses Cinavia technology tolimit theuse of unauthorized
copies of some commercially-produced film and videos and their
soundtracks. When aprohibited use of an unauthorized copy is
detected,amessagewillbedisplayedandplaybackorcopyingwillbe
interrupted.
More information aboutCinavia technology is provided at theCinavia
Online Consumer Information Center at http://www.cinavia.com. To
requestadditionalinformationaboutCinaviabymail,sendapostcard
with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego,
CA, 92138, USA.
The unitmay keep the user settings information in the unit. If you
discard this unit either by disposalor transfer, then follow the
procedure to return all the settings to the factory presets to delete the
user settings. (>35, “To return all settings to the factory preset.”)
≥The operation history may be recorded in the memory of this unit.
(Inside of product)
WARNING
CAUTION
Information on Disposal in other Countries
outside the European Union
This symbol is only valid in the
European Union.
If you wish to discard this product,
please contact your local authorities
or dealer and ask for the correct
method of disposal.
Wireless LAN connection
Restriction on use of
unauthorized copied content
To dispose or transfer this unit
DMP-BDT330_230_VQT4V26_eng.book 3 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

4VQT4V26
Table of contents
IMPORTANT SAFETY
INSTRUCTIONS. . . . . . . . . . . 2
Precautions . . . . . . . . . . . . . . . 3
Getting started
Accessories . . . . . . . . . . . . . . . 5
Unit and media care. . . . . . . . . 5
Playable media. . . . . . . . . . . . . 6
Control reference guide . . . . . . 8
Connections & Settings
Connecting to a TV. . . . . . . . . 10
Connecting to
an amplifier/receiver. . . . . . . 11
Connecting to the network . . . 13
Settings . . . . . . . . . . . . . . . . . 14
Playback
Inserting or
removing media . . . . . . . . . . 17
HOME menu. . . . . . . . . . . . . . 18
Multi User Mode. . . . . . . . . . . 19
Playback. . . . . . . . . . . . . . . . . 20
VIERA Connect
(Enjoying Netflix, etc.). . . . . . 23
Home Network feature . . . . . . 24
“HDMI CEC”. . . . . . . . . . . . . . 26
Settings
Option menu . . . . . . . . . . . . . . 27
Setup menu. . . . . . . . . . . . . . . 29
Reference
Troubleshooting guide . . . . . . 35
Messages . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . 40
Limited Warranty . . . . . . . 45, 46
Referencia rápida en español
(Spanish Quick Reference). . . . 47
Index. . . . . . . . . . . . . Back cover
DMP-BDT330_230_VQT4V26_eng.book 4 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

5
VQT4V26
Getting startedConnections & SettingsPlaybackSettingsReference
Accessories
Check the supplied accessories before using this
unit.
1 Remote control
(N2QAYB000874)
2 Batteries for remote control
1 AC power supply cord
(K2CB2CB00022)

≥Product numbers provided in this Owner’s Manual correct
as of December 2012. These may be subject to change.
≥Do not use AC power supply cord with other equipment.
∫Using the remote control
Insert so the poles (iand j) match those in the
remote control.
Point it at the remote control signal sensor on this
unit. (>9)
Unit and media care
∫Clean this unit with a soft, dry
cloth
≥Never use alcohol, paint thinner or benzine to
clean this unit.
≥Before using chemically treated cloth, carefully
read the instructions that came with the cloth.
∫This unit’s lens
Use the lens cleaner (not supplied) to clean the
unit’s lens.
∫Clean discs
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling
precautions
≥Handle discs by the edges to avoid inadvertent
scratches or fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
≥Clean any dust, water, or foreign matter from
the terminals on the rear side of the card.
≥Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels (rented discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
[For_Canada]
The enclosed Canadian French label sheet corresponds
to the English display on the unit.

R6/LR6, AA

(Alkaline or manganese batteries)
DO DO NOT
DMP-BDT330_230_VQT4V26_eng.book 5 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

6VQT4V26
Playable media
≥See pages 7 and 40 for more information on the types of content that can be played.
Device Media
markings Device types Contents format
BD-Video Video
BD-RE Video, JPEG, MPO
BD-R Video, MKV
DVD-Video Video
DVD-R
Video, AVCHD,
MKV, JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA
DVD-R DL
DVD-RW Video, AVCHD
— +R/+RW/+R DL
Music CD Music [CD-DA]
—CD-R
CD-RW
MKV, JPEG, MPO
AAC, FLAC, MP3,
Music [CD-DA], WAV,
WMA
SD Memory Card (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)
SDXC Memory Card (48 GB, 64 GB)
(Compatible with both mini and micro types)
AVCHD, AVCHD 3D,
MP4, JPEG, MPO
—USB devices
(up to 2 TB)
MKV, MP4, MPEG2,
JPEG, MPO, AAC,
FLAC, MP3, WAV, WMA
BD
DVD
CD
SD
USB
DMP-BDT330_230_VQT4V26_eng.book 6 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

7
VQT4V26
Getting started
∫Discs that cannot be played in
this unit
Any other disc that is not specifically
supported or previously described.
≥DVD-RAM
≥Super Audio CD
≥Photo CD
≥DVD-Audio
≥Video CD and Super Video CD
≥HD DVD
∫Region management information
BD-Video
This unit can play BD-Video discs supporting the
region code “A”.
DVD-Video
This unit can play DVD-Video discs supporting
the region number “1” or “ALL”.
∫Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW
recorded by a recorder needs to be finalized by
the recorder to play on this unit. Please refer to
the recorder’s instructions.
∫BD-Video
≥This unit supports high bit rate audio (Dolby®
Digital Plus, Dolby®TrueHD, DTS-HD High
Resolution Audio and DTS-HD Master Audio)
adopted in BD-Video.
≥[BDT230] : If “Dolby D/Dolby D +/Dolby TrueHD”
is set to “PCM” and “DTS Neo:6” is set to “Off”,
the maximum possible number of Dolby®sound
is 5.1ch PCM. (>30, 31)
∫3D
≥3D videos and 3D still pictures can be played
back when this unit is connected to a 3D
compatible TV using a High Speed HDMI
Cable.
≥2D video can be enjoyed as 3D virtually. (>28)
∫Music CD
≥Operation and sound quality of CDs that do not
conform to CD-DA specifications (copy control
CDs, etc.) cannot be guaranteed.
≥The digital audio content side of a DualDisc
does not meet the technical specifications of
the Compact Disc Digital Audio (CD-DA) format
so playback may not be possible.
∫SD card
≥miniSD Cards, microSD Cards,
microSDHC Cards and microSDXC
Cards can be used, but must be used
with an adaptor card. These are
usually supplied with such cards, or
otherwise customer provided.
≥To protect the card’s contents, move
the record prevention tab (on the SD card) to
“LOCK”.
≥This unit is compatible with SD Memory Cards
that meet SD Card Specifications FAT12 and
FAT16 formats, as well as SDHC Memory
Cards in FAT32 format and SDXC Memory
Cards in exFAT.
≥If the SD card is used with incompatible
computers or devices, recorded contents may
be erased due to the card being formatted etc.
≥Usable memory may be slightly less than the
card capacity.
∫USB device
≥This unit does not guarantee connection with all
USB devices.
≥This unit does not support USB device
charging.
≥FAT12, FAT16, FAT32, and NTFS file systems
are supported.
≥This unit supports USB2.0 High Speed.
≥This unit supports an HDD formatted in FAT32
and NTFS. If the HDD is not recognized, the
power to the HDD may not be supplied. Supply
power from an external source.

≥It may not be possible to play the above media in some
cases due to the type of media, the condition of the
recording, the recording method, and how the files were
created.
≥The producers of the disc can control how discs are
played, so you may not always be able to control play as
described in this Owner’s Manual. Read the disc’s
instructions carefully.
Example:
24
1
ALL
1
Example:
DMP-BDT330_230_VQT4V26_eng.book 7 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

8VQT4V26
Control reference guide
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using the
unit’s remote control. Some buttons may not
work depending on the TV.
[ÍTV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers or
characters
4 Cancel
5 Basic playback control buttons (>20)
6 Show status messages (>21)
7 Show Pop-up menu/Top menu (>21)
8 Show Option menu (>27)
9 Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the
display.
10 Transmit the remote control signal
11 Open or close the disc tray (>17)
12 Select audio (>20)
13 Show MiracastTM screen (>24)
14 Show the Home screen of the VIERA
Connect (>23)
15 Exit the menu screen
16 Show Netflix screen (>23)
17 Show HOME menu (>18)
18 [3,4,2,1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (>20)
19 Return to previous screen
1
2
3
4
5
6
7
16
9
8
17
15
19
18
13
12
14
11
10
DMP-BDT330_230_VQT4V26_eng.book 8 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

9
VQT4V26
Getting started
1Standby/on switch (Í/I) (>14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Open or close the disc tray (>17)
3 Blue LED
It is possible to set the LED to turn on/off.
(>34)
4 Start play (>20)
5 Stop (>20)
6 Display
7 USB port (>17)
8 V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(>34)
9 SD card slot (>17)
10 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20eup and down, 30eleft and
right
11 Disc tray (>17)
Rear panel terminals (>10–13)
1Standby/on switch (Í/I) (>14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Start play (>20)
3 Stop (>20)
4 Open or close the disc tray (>17)
5 Display
6 USB port (>17)
7 SD card slot (>17)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20eup and down, 30eleft and
right
9 Disc tray (>17)
Rear panel terminals (>10–13)
SD CARD
IR
4568 791011
12
3
[BDT330]
Pull to flip down
the front panel.
SD CARD
5789 6
1234
[BDT230]
Pull to flip down
the front panel.
DMP-BDT330_230_VQT4V26_eng.book 9 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

10 VQT4V26
Connections & Settings
Connecting to a TV
Connect the power supply cord after making all connections.
≥Before making any connections, we recommend that you temporarily disconnect all the units from AC
power.
≥Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended
that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0
meters (16.4 ft.) or less.
≥This unit consumes a small amount of AC power (>40) even when turned off. For the purpose of
power conservation, the unit can be disconnected if you will not be using it for extended period of
time.
HDMI IN
HDMI cable
AC power supply cord
(supplied)
To a household
AC outlet
[BDT330] : Use HDMI AV OUT MAIN terminal.
[BDT230]
DMP-BDT330_230_VQT4V26_eng.book 10 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

11
VQT4V26
Connections & Settings
Connecting to an amplifier/receiver
Perform either one of the following connections in accordance with your amplifier/receiver input
terminal.
[BDT330] : Use HDMI AV OUT MAIN terminal.
≥Set “Digital Audio Output” (>30).
≥When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV, then connect
the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.
≥When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
You can enjoy richer sound by using the HDMI AV OUT SUB terminal.
≥Set “HDMI(SUB) Output Mode” to “V.OFF”. (>30)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥It is possible to play back 3D videos and 3D still pictures when the connected TV is 3D compatible,
even if the amplifier/receiver is not 3D compatible.
≥The HDMI connection using HDMI AV OUT MAIN supports HDMI CEC (>26).
The HDMI AV OUT SUB terminal is not compatible with the HDMI CEC.
HDMI AV OUT
HDMI AV OUT SUB [BDT330]
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
Amplifier/receiver
HDMI cable HDMI cable
[BDT230]
HDMI IN HDMI IN
Amplifier/receiver
HDMI cable HDMI cable
DMP-BDT330_230_VQT4V26_eng.book 11 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

12 VQT4V26
≥Set “HDMI Audio Output” to “Off” (>30).
≥Set “Digital Audio Output” (>30).
OPTICAL
OPTICAL IN
Amplifier/receiver
Optical digital cable
[BDT330]
[BDT230]
DMP-BDT330_230_VQT4V26_eng.book 12 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

13
VQT4V26
Connections & Settings
Connecting to the network
The following services can be used when this unit is connected to broadband.
≥Firmware can be updated (>16)
≥You can enjoy BD-Live (>22)
≥You can enjoy VIERA Connect (>23)
≥You can access other devices (Home Network) (>24)
≥This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without
router. You can use this function when enjoying Home Network feature, etc. Internet access is not
available while connected via Wi-Fi DirectTM. (>24, 32)
For details about connection method, refer to the instructions supplied with the connected equipment.
This unit has built-in Wi-Fi®and can be connected to a wireless router.
≥For up-to-date compatibility information on your wireless router, refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
For additional information about this unit refer to
http://www.panasonic.com/help (For U.S.A.)
≥The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.
≥See page 3 for the precautions for wireless LAN connection.
≥Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
≥Inserting any cable other than a LAN cable in the LAN port can damage the unit.
Wireless LAN connection
LAN cable connection
Wireless router, etc. Internet
LAN Cable
Internet
Broadband router, etc.
[BDT330]
[BDT230]
DMP-BDT330_230_VQT4V26_eng.book 13 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

14 VQT4V26
Settings
After connecting your new player for the first time
and pressing [Í], the basic settings screen will
appear.
Preparation
Turn on the TV and select the appropriate
video input.
1Press [Í].
Setup screen appears.
2Follow the on-screen instructions to
continue with the settings.

≥You can perform this setup anytime by selecting “Easy
Settings” in the Setup menu. (>33)
After completing “Easy Settings”, you can perform
“Easy Network Setting”.
Select “Wired” and press [OK].
Follow the on-screen instructions to establish
your connection settings.
1Select “Wireless” and press [OK].
2Select “Search for wireless network” or
“WPS (PUSH button method)” and press
[OK], then follow the on-screen
instructions to continue with the settings.
∫“WPS (PUSH button method)”
If you are using a wireless router that supports
WPS (Wi-Fi Protected SetupTM), you can easily
perform the settings.
Easy Settings
Easy Network Setting
Wired connection
Wireless connection
Easy Network Setting
Wired
Wireless
Select a connection mode.
OK
RETURN
Wireless Settings
Select a connection method.
Please refer to the operating instructions of your wireless
access point about connection methods.
Search for wireless network
WPS (PUSH button method)
DMP-BDT330_230_VQT4V26_eng.book 14 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

15
VQT4V26
Connections & Settings
∫“Search for wireless network”
The available wireless networks will be displayed.
1Select your network name and press [OK].
≥If your network name is not displayed,
search again by pressing the red button on
the remote control. Stealth SSID will not be
displayed; in this case, enter manually.
When your wireless network is encrypted
2Press [OK] to select “Encryption Key”.
3Enter your encryption key (password).
≥You can switch between capital and lower
case letters by pressing the “Shift” key.
To enter your network name (SSID) manually
If your network name (SSID) is not displayed in
step 1, follow these steps.
1 To display the network name (SSID) input
screen :
Press [HOME]
>press [OK] to select “Setup”
>select “Player Settings”
>select “Network” and press [OK]
>select “Network Settings” and press [OK]
>select “Wireless Settings” and press [OK]
>select “Connection Setting” and press [OK]
>select “Manual setting” and press [OK]
2 Press [OK] to select “SSID” and enter your
SSID.
≥If your wireless network is encrypted, go to
step 2.
To obtain your network name (SSID*) and
encryption key (password).
The default settings may be
printed on the router. If the
SSID and password have been
changed, consult the person
responsible for setting up your
network.
For more details, refer to the
manual supplied with the wireless broadband
router, or contact your Internet provider.
For more information or assistance, refer to
http://www.panasonic.com/help
(U.S. customers only)
SSID XXXXXXXXXXXX
KEY XXXXXXXXXXXX
PIN XXXXXXXXX
e.g.
Search again
Connection Setting
Reception
Select a wireless network for connection.
SSID
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
OK
RETURN OPTION
Wireless Settings
Enter the encryption key (password) of the wireless network.
Encryption Key
Set
l
3
6
9
#
“
2
5
8
0
‘
1
4
7
*
;
g
n
u
@
,
f
m
t
.
-
e
l
s
z
_
d
k
r
y
~
c
j
q
x
:
b
i
p
w
/
a
h
o
v
Space
Symbols
Encryption Key (Password)
Shift Delete
Finish
Alphanumeric Other Characters
OK
RETURN
a
Wireless Settings
Enter your network name (SSID) to connect.
SSID
Set
DMP-BDT330_230_VQT4V26_eng.book 15 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

16 VQT4V26

≥Refer to the operating instructions of the hub or router.
≥WPS (Wi-Fi Protected Setup) is a standard that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your wireless router supports
WPS, check the wireless router operating instructions.
≥You can perform this setup anytime by selecting “Easy
Network Setting” in the Setup menu. (>32)
≥You can redo these settings individually using “Network
Settings”. (>32)
≥Do not use this unit to connect to any wireless network for
which you do not have usage rights.
During automatic searches in a wireless network
environment, wireless networks (SSID) for which you do
not have usage rights may be displayed; however, using
these networks may be regarded as illegal access.
≥After performing network settings on this unit, the settings
(encryption level, etc.) of the wireless router might change.
When you have trouble getting online on your PC, perform
the network settings on your PC in accordance with the
settings of wireless router.
≥Please be aware that connecting to a network without
encryption may result in the content of the communication
being illegitimately viewed by a third party, or the leaking of
data such as personal or secret information.
* SSID:
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
If you have more than one Panasonic player/
recorder and the remote control operates both
products at once, you will need to change the
remote control code to prevent this occurrence.
(>34, “Remote Control Code”)
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.
When a new firmware version is available, the
following message is displayed.
To update the firmware
Press [HOME]
>press [OK] to select “Setup”
>select “Player Settings”
>select “System” and press [OK]
>select “Firmware Update” and press [OK]
>select “Update Now” and press [OK]
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, “FIN” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.

≥If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit.
(>34, “Firmware Version Information”)
≥Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”. (>34)
Reprogramming the
remote control
Firmware updates
New firmware is available.
Please update firmware in Setup.
The firmware was updated.
Current Version: x.xx
RETURN
OK
DMP-BDT330_230_VQT4V26_eng.book 16 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

17
VQT4V26
Connections & SettingsPlayback
Playback
Inserting or removing
media
Notes
≥When inserting a media item, ensure that it is
facing the right way up.
≥When removing the SD card, press the center
of the card and pull it straight out.
≥If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
CAUTION
Do not place objects in front of the unit. The disc
tray may collide with objects when it is opened,
and this may cause malfunction.
SD CARD
IR
SD CARD
[BDT330]
[BDT230]
DMP-BDT330_230_VQT4V26_eng.book 17 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

18 VQT4V26
HOME menu
Major functions of this unit can be operated from
the HOME menu.
Preparation
Turn on the TV and select the appropriate video
input on the TV.
1Press [Í] to turn on the unit.
≥After network service introduction banner is
shown, the HOME menu is displayed.
–When connected to the network, the
banner content may be changed.
–You can disable the “Start-up Banner”
(>34).
2 Press [OK] or [ 3 , 4 , 2 , 1 ] to select the item.
≥If there are any other items, repeat this
step.
Videos/Photos/Music
Network
Setup
To show the HOME menu
Press [HOME].

≥Items to be displayed may vary with the media.
≥Where necessary, set “Mixed Data Disc Option” when
using a disc with both data files (MP3, JPEG, MKV, etc.)
and Video (BDAV and AVCHD). (>34)
Videos
MusicPhotos Setup
Network
HOME
Blu-ray Disc Player
Personalize
1st user
Disc Play back the contents. (>20)
≥When multiple contents are
recorded, select the types of
contents or the title.
USB
SD Card
Network
Service Displays the Home screen of
VIERA Connect. (>23)
Home
Network
DLNA Client (>24)
Miracast (>24)
Media Renderer (>25)
Player
Settings (>29)
USB
Management (>22)
Wallpaper Changes the background of
HOME menu.
DMP-BDT330_230_VQT4V26_eng.book 18 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

19
VQT4V26
Playback
Multi User Mode
Multi User Mode allows individuals to customize
settings and switch to their saved settings easily.
Up to 4 people can use the unit with their own
settings.
The following settings can be personalized:
≥The user icon
≥The wallpaper of HOME menu
≥The audio and picture settings (>27, 29)
AThe user name and icon currently selected
BPersonalize a new user and switch between
users with colored buttons.
1Press [HOME].
2Press the colored button that indicates
new user personalization.
3Select an item and change the settings
according to the indications.
The following items can be set.
4Select “Confirm” and press [OK].
To change the personalized user information
Select “Edit User Information” from Setup menu.
(>34)
Press the colored buttons in the HOME menu
to switch to the user corresponding to the
button.
Videos
MusicPhotos Setup
Network
HOME
Blu-ray Disc Player
User 1 Personalize
2nd user
User 1
A
B
Personalizing a new user
Input
Nickname Personalize a user name.
Select Icon
Personalize a user icon.
Select from Illustrations
The image can be selected from
prepared illustrations.
Create from Photos
You can select a photo in
recording media as an icon.
(>27, “Icon Personalization”)
Select
Wallpaper
Personalize a background of the
HOME menu.
≥In addition todefault wallpapers,
you can select a photo in
recording media as a wallpaper.
(>27, “Wallpaper”)
Switching the user
DMP-BDT330_230_VQT4V26_eng.book 19 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分

20 VQT4V26
Playback
1Insert the media.
Playback starts depending on the media.
2Select the item to play and press [OK].
Repeat this procedure if necessary.

≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE
DISPLAYED. Press [∫STOP] when you have finished
playback to protect the unit’s motor, your TV screen and so
on.
≥MKV: Successive play is not possible.
≥It is not possible to play back AVCHD and MPEG2 videos
which have been dragged and dropped or copied and
pasted to the media.
≥To save on electricity, this unit is turned off automatically if
there is no button operation for about 30 minutes when not
playing back (such as when paused or displaying the
menu, displaying still pictures, etc.). (Compatible with
ENERGY STAR)
The following functions may not work depending
on the media and contents.
Press [∫STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
≥The point is cleared if the media is removed.
≥On BD-Video discs including BD-J, the
resume play function does not work.
Press [;PAUSE].
≥Press [;PAUSE] again or [1PLAY] to restart
play.
Search
While playing, press [SEARCH6] or
[SEARCH5].
Slow motion
While paused, press [SEARCH5].
The speed increases up to 5 steps.
≥Music, MP3, etc.: The speed is fixed to a single
step.
≥Press [1PLAY] to revert to normal playback
speed.
While playing or paused, press [:] or
[9].
Skip to the title, chapter or track.
While paused, press [1] (;1).
≥Press and hold to change in succession
forward.
≥Press [1PLAY] to revert to normal playback
speed.
Press [AUDIO].
You can change the audio channel number or
soundtrack language, etc.
Operations during playback
Stop
Pause
Search/Slow motion
Skip
Frame-by-frame
Changing audio
DMP-BDT330_230_VQT4V26_eng.book 20 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分