Vdwall LVP615D User manual

LVP615D
LED HD Video Processor
User Manual
V1.0

LVP615D 使用说明
2
Contents
Chapter 1: Safety precautions-------------------------------------------------- 4
Chapter 2: Item list -------------------------------------------------------------------- 5
Chapter 3: Hardware connection
3.1 Rear view-------------------- --------------------------------------------------- 6
3.2 Port description----------------------------------------------------------------- 6
3.3 Hardware connection diagram----------------------------------------------- 8
3.4 Specifications---------------------------------------------------------------------9
3.5 Product dimensions------------------------------------------------------------11
Chapter 4: Front panel and remote control instructions
4.1 Front panel buttons and remote control schematic----------------------- 13
4.2 Remote control operation instructions---------------------------------------- 15
Chapter 5: Basic user instructions
5.1 Input signals selection ---------------------------------------------------------- 17
5.2 PIP/PBP operation--------------------------------------------------------------- 21
5.3 Mosaic operation----------------------------------------------------------------- 22
5.4 Other basic user operation----------------------------------------------------- 23
Chapter 6: Setup menu instructions
6.1 Output image setting------------------------------------------------------------ 26
6.2 Input video signal setting------------------------------------------------------- 30
6.3 Text overlay setting-------------------------------------------------------------- 33
6.4 Image quality setting------------------------------------------------------------ 35
6.5 Audio setting----------------------------------------------------------------------- 36
6.6 Communication setting---------------------------------------------------------- 37
6.7 Language setting------------------------------------------------------------------ 38
6.8 Advance setting------------------------------------------------------------------- 49
6.9 PIP/PBP setting-------------------------------------------------------------------- 42
6.10 Mosaic setting------------------------------------------------------------------- 43

LVP615D 使用说明
3
Chapter 7: Remote control instructions
7.1 Hardware communication-------------------------------------------------- 48
7.1.1 RS232 and USB-------------------------------------------------------------- 49
7.1.2 Wired network---------------------------------------------------------------- 50
7.1.3 WIFI connection--------------------------------------------------------------- 51
7.2 LVP615D series PC control software instructions----------------------
58
7.2.1 Control method---------------------------------------------------------------- 58
7.2.2 Software interface instructions-------------------------------------------- 59
7.3 APP remote control---------------------------------------------------------- 76
7.3.1 Connection----------------------------------------------------------------------- 77
7.3.2 APP control instructions-------------------------------------------------------80
Chapter 8 Copyright information---------------------------------------------------97
Appendix: modify the record table ----------------------------------------------------- 98

LVP615D 使用说明
4
Chapter 1: Safety precautions
！Danger
There is high voltage in the processor, to prevent any unexpected
hazard, unless you are maintenance, please do not open the cover
of the device.
！Warning
1. This device shall not encounter water sprinkle or splash,
please do not place anything containing water on this device.
2. To prevent fire, keep this device far from any fire source.
3. If this device gives out any strange noise, smoke or smell,
please immediately unplug the power cord from receptacle, and
contact local dealer.
4. Signal cables are not hot swappable.
！Caution
1. Please thoroughly read this manual before using this device,
and keep it well for future reference.
2. In the event of lighting or when you are not going to use the
device for a long time, please pull the power plug out of
receptacle.
3. Nobody other than professional technicians can operate the
device, unless they have been appropriately trained or under
guidance of technicians.
4. To prevent equipment damage or electric shock, please don’t
fill in anything in the vent of the device.
5. Do not place the device near any water source or anywhere damp.
6. Do not place the device near any radiator or anywhere under
high temperature.
7. To prevent rupture or damage of power cords, please handle and
keep them properly.

LVP615D 使用说明
5
8. Please immediately unplug power cord and have the device
repaired, when
1) Liquid splashes to the device.
2) The device is dropped down or cabinet is damaged.
3) Obvious malpractice is found or performance degrades.
Chapter 2 Item List
Please unpack the product carefully, then check whether all the following
things are included in the package. If anything is found missing, please contact
the dealer.
Standard accessories
The accessories supplied with this LED Video Processor may differ from
the figures contained in the User’s Manual, but they are applicable for the
regions where you live.(LED sending card is optional)
1.5m power cord*1
1.5m DVI cable*1
0.5m DVI cable*1

LVP615D 使用说明
6
1.5m RS232 to RJ45
adapter cable*1
User manual *1
CD*1
Remote control *1
Audio connector *1
BNC-RCA adapter *3
DVI to VGA

LVP615D 使用说明
7
Chapter 3 Hardware connection
3.1 Rear view
1
3
5
2
4
4
3.2 Ports description
3.2.1 Video signal inputs (INPUT)
LVP615D supports 8 video signals input as follows:
Port
Description
V1
1*Composite Video (PAL/ NTSC)
V2 / YPbPr
1* Composite video (PAL/ NTSC) or analog
component video input
VGA1~VGA2
2 * PC analog signal
DVI
1* DVI ( PC digital signal)
HDMI
1*HDMI (HD digital signal)
DP
1*DisplayPort( digital signal input)
EXT.
1* Extended DVI/VGA/HDMI

LVP615D 使用说明
8
3.2.2Audio input signals（AUDIO）
LVP615D supports 4-channel stereo audio inputs switching. Of
which, 2 channels are DP and HDMI input. The other 2 channels are AD1, AD2
external audio input. AD1 and AD2 can be mapped to any one of signal inputs,
and will be switched synchronous to the selection of video input signals.
3.2.3 Video signal output
Port
Description
VGA OUT
1-channel analog RGBHV signal output,
which can be connected to a local display
device for monitoring (it is strongly
recommended to use this port when
operating and setting LVP615D).
DVI OUT1 /
DVI OUT2
2 same DVI digital graphic signal output,
it can be connected to external 2 LED
transmission cards or LED transmission
boxes.
DVI Loop OUT
1-channel computer DVI digital signal
loop output
3.2.4 Other ports
Port
Description
LAN
TCP/IP local area network control
interface
USB
USB communication port
RS232 IN
Serial communication interface, used to
connect the RS232 port of PC to realize

LVP615D 使用说明
9
PC software control.
RS232 LOOP
Serial communication cascading output
for connecting the RS232 IN of next unit,
through single PC can control several
units.
RF
Antenna interface of wireless control
function
3.3 Hardware connection diagram

LVP615D 使用说明
10
3.4 Specifications

LVP615D 使用说明
11
Inputs
Nums / Type
2×Video
1×YPbPr
2×VGA（RGBHV）
1×DVI（VESA /CEA-861）
1×HDMI（VESA /CEA-861）
1×DP（VESA）
1*DVI/VGA/HDMI
Video system
PAL/NTSC
Composite Video
Amplitude Impedance
1V（p_p）/ 75Ω
VGA format
PC（VESA standard）
≤2048×1152_60Hz
VGA Amplitude
Impedance
R、G、B = 0.7 V（p_p）/ 75Ω
YPbPr format
SD/HD（CEA -861）
≤1920x1080p_60Hz
YPbPr Amplitude
Impedance
Y=1V（p_p）/ 75Ω
Pb= 0.35V（p_p）/ 75Ω
Pr= 0.35V（p_p）/ 75Ω
DVI format
PC（VESA standard）
≤2304×1152_60Hz
Custom output format
Width≤3840 ，
Height≤1920
HDMI format
PC（VESA standard）
≤1920×1080_60Hz
HDMI1.3（CEA-861）
DP format
Display Port 1.1 （VESA
standard）
≤1920×1080_60Hz
Input connectors
Video：BNC
YPbPr：BNC×3
VGA：15pin D_Sub(female)
DVI：24+1 DVI_D
HDMI：HDMI port A type
DP：Display Port
Outputs

LVP615D 使用说明
12
Nums/ type
2×DVI,1×VGA(RGBHV)
VGA/DVI format
1024×768_60Hz/75Hz
1280×1024_60Hz/75Hz
1600×1200_60Hz
1920×1080p_50Hz/60Hz
1366×768_60Hz
1440×900_60Hz
2048×1152_60Hz
2560×816_60Hz
2304×1152_60Hz
1920×1200_60Hz
1200×1600_60Hz
1080×1920_60Hz
1536×1536_60Hz
Custom output format（maximum horizontal pixel:3840，
maximum vertical height:1920）
Output connectors
VGA OUT:15Pin D-sub( female)
DVI OUT1：24+5 DVI_I
DVI OUT2：24+1 DVI_D
Others
Control
RS232/USB/LAN/WIFI/Remote control
Input voltage
100-240VAC 50/60Hz
Power consumption
≤25W
Environment
Temperature
0-45 ℃
Environment Humidity
15-85%
Product Size
483(L) x 274(W) x 66.6(H)mm
Weight
G.W.：5.7 Kg, N.W.：4.2Kg

LVP615D 使用说明
13
3.5 Product dimensions

LVP615D 使用说明
14
RS232 cable order：

LVP615D 使用说明
15
Chapter 4 Front panel and remote control instructions
LVP615D supports front panel button, remote control, RS232 and LAN
control. Same printing on remote control buttons and front panel
buttons,same button functions. The instructions are as below.
4.1 Front panel buttons and remote control schematic
1
2
4
3
5
8
7
6
9
10
11

LVP615D 使用说明
16
1
4.1.1Input signal selection buttons
（, , , , , , , ，）：select the
input signal.
4.1.2 Setup buttons( , ，, , ), Set the output
image parameters.
4.1.3 VGA auto adjustment button ( )automatically adjust the
VGA input signal.
4.1.4 Switching time setup button（ ）：select seamless switching
time including 0 second (cut), 0.5 second,1.0 second and 1.5 second
( fade in fade out) and blend switching function.
5
4
6
The buttons on remote
control have the same
functions as the relative
buttons on front panel.
3
9

LVP615D 使用说明
17
4.1.5 PC signal bypass output ( )：Switch between part and full
display of PC signal. The indicator shows the current state of the input
signal.
4.1.6 PIP/PBP keys（ ， ， ， ）：
:PIP/PBP turn on/ off button. When the indicator is on, press
input signal selection to choose different group input or current input itself
as the PIP signal.
， ， :Switch PIP/PBP model.
4.1.7 Mosaic button （ ） Turn on /off mosaic function. The
indicator shows the current state of mosaic.
4.1.8 Freeze button （ ） turn on / off freeze function.
4.1.9 Brightness adjustment button （ ， ） adjust output
brightness level under user operation station.
4.1.10 remote control sensor: built- in infrared receiver.
4.1.11 remote launch window: built-in infrared transmitter.

LVP615D 使用说明
18
4.2 Remote control operation instructions
4.2.1 Open the battery compartment on the back of the remote control,
make sure the battery effective contact
4.2.2 Please aim remote control to the sensor area of LVP615D, if
there is obstacle between them, LVP615D may not receive
command.
4.2.3 To make sure remote control has a good performance. If found
improper operation, please replace new battery immediately.
4.3.3 Batteries shall not be exposed to, such as sunlight, fire or
the like overheated environment.
Chapter 5 Basic user instructions
After LVP615D boot, it enters the operation status of last shut-down including
signal switching status, PIP/POP (or Text overlay) status and mosaic status.
Among them, PIP/PBP( or text overlay) status and mosaic status can only
realize relative functions and cannot do other operation. Other relative
operations are available under signal switching status. We illustrate the
common operations as below.

LVP615D 使用说明
19
5.1 Input signals selection
LVP615D supports two signal switching methods including“One key
switching”and“Pre.+Take switching”. The switching method can be set in
user setup menu “2.6 switch mode”. “One key switch” is default method.
One key switch to new input signal through input signal selection buttons. ；
“Pre.+Take switch” only available for seamless switching. Press input buttons
to preselect first. Then press Take button to switch from current input signal to
preselected signal.

LVP615D 使用说明
20
Input signal selection as follows：
Buttons
Description
1* Composite video signal input (PAL/ NTSC)
1* Composite video (PAL/ NTSC) or analog
component video input
2 * PC analog signal input
1*DVI digital signal input
1 * HDMI digital signal input
1* DisplayPort digital signal input
*
1* extended signal input
Note： (1) YPbPr and V2 share the same port. If need,configure
the port to YPbPr in setup menu.
5.1.1 One key switch
LCD screen display as below：