VENOM FPV RACE GATE User manual
FPV RACE GATE
USER MANUAL
VENOM GROUP INTERNATIONAL
14028 N. Ohio Street
Rathdrum, Idaho 83858 USA
CUSTOMER SERVICE
North America: 800.705.0620
Outside North America: 208.782.0620
For Customer Service support
and the quickest warranty service
please visit www.venompower.com
and click the support tab
/venomgroup /Venom_RC /venomgroupintl
VEN-0067
All manuals and user guides at all-guides.com
all-guides.com
UNPACK, SET UP AND RACE!
Venom’s FPV race gates make
racing anywhere a breeze.
Constructed using fiberglass
tent poles and nylon fabric, these
stylish and simple gates will keep
you in the FPV game.
STEP 1. Unpack the bag
Included in the bag:
3- FIBERGLASS TENT POLES
1- NYLON VENOM GATE
6- METAL STAKES
STEP 2. Unbuckle the belt
connected to both
sides and lay out
nylon gate.
STEP 3. Connect fiberglass
poles.
STEP 4. Slide poles into
nylon openings.
STEP 5. Disconnect the
final piece of the
pole to make it
easier to insert into
the end flap.
STEP 6. Buckle the strap.
STEP 7. Stand the gate up,
and put the smaller
poles on each end
into slits. Stake
to ground.
All manuals and user guides at all-guides.com
