Verbatim MediaStation Network Multimedia Hard Drive User manual

1
MediaStation
Network Multimedia Hard Drive
User Guide
English

2
Introduction 3
Specifications 3
Precautions 3
System Requirements 4
Package Content 4
Product Overview 4
1. Use as External USB HDD 4
1.1 Copy Data via USB 4
1.1.1 Windows 2000, XP, Vista 5
1.1.2 Linux 5
1.1.3 Mac 6
2. Access PC via Network 6
2.1 Connect LAN Cable 6
2.2 Set Network Configurations 6
2.2.1 Windows 2000 6
2.2.2 Windows XP 9
2.2.3 Windows Vista 11
3. Use as Multimedia Player 13
3.1 Connect to External AV Device 13
3.1.1 Connect Video Cable 13
3.1.2 Connect Audio Cable 14
3.2 Basic Setup 14
3.2.1 Video Setup 14
3.2.2 Audio Setup 15
3.2.3 Network Setup 15
3.2.4 Screen Setup 17
3.2.5 Preview Setup 17
3.2.6 LED Setup 17
3.3 Basic Screen Menu 18
3.3.1 Mode Selection, Media Type Selection 18
3.3.2 File Selection 19
3.4 Play Video Files 20
3.5 Play DVD Files 21
3.6 Play Music Files 22
3.7 Play Photo Files 23
3.8 Make a Play-List 24
3.9 Remote Controls 25
3.10 Others 25
3.10.1 Music Slide Show 25
3.10.2 MP3 Quick Play 25
3.10.3 Change Background Image 25
3.10.4 Firmware Upgrade 26
Technical Support 26
Limited Warranty Terms 26
WEEE Notice 26
FCC Compliance 26
CE Declaration - EC Declaration of Conformity 27
RoHS Compliance 27
Contents

3
Introduction
Verbatim MediaStation is brand-new digital multimedia player supporting dual data access mode via 3.5” HDD inside and 10/100Mbps
Network. Easily enjoy Digital Movie, Digital Music, Digital Photo data of 3.5” HDD inside and Networking PC’s hard disk drive on your TV.
• Dual Data Access Mode via 10/100Mbps LAN and 3.5” HDD inside
• Digital Multimedia Player via Home TV or Car TV
• USB 2.0 External Storage via PC (NTFS, FAT32)
• Audio - Stereo, Digital Coaxial & Optical 5.1ch. Sound
• Video - Composite, S-Video, HD Component 480p, 720p, 1080i
• DVD Manager - Playback of DVD File same as Original DVD Title
• Easy Firmware Upgrade.
Specifications
Product Name Verbatim MediaStation
Power 12V 3A
Weight 1200g (including HDD) approx.
Dimension 47 x 150 x 210 mm
Available OS Windows 2000/XP/Vista, Mac OS 9.0 Higher, Linux 2.4 Higher
USB Interface 480Mbps USB 2.0 (USB 1.1 Compatible) / Slave
Network Interface 10/100 Mbps LAN (RJ-45)
HDD Type 3.5” SATA HDD
HDD File System NTFS / FAT32 (Pre-formatted FAT 32)
TV Type NTSC / PAL
Supported Format Movie MPEG 1, 2, 4 (MPG, MPEG, AVI, M2V, DAT, VOB, IFO) DivX, XviD (except GMC, Qpel option applied)
Music MP3, OGG Vorbis, WAV, WMA (except WMA9 pro.lossless)
Photo JPG(JPEG)
Video Output COMPOSITE / S-VIDEO / COMPONENT Y, Pb, Pr (480p, 720p, 1080i Progressive Scan)
Audio Output STEREO L-R / DIGITAL COAXIAL, OPTICAL (DTS Pass-Through Only)
Working Temperature 0˚C ~ 60˚C
Working Humidity 10% ~ 50%
Precautions
• It is important to regularly backup the content of any hard disk drive to an alternative medium. Verbatim is not responsible for any loss of
data.
• It’s better to unplug the power adaptor when you do not use for a long time.
• MediaStation does not support the DivX, XviD codec of video files that has GMC, Qpel option.
• MediaStation supports only “Pass-Through” for DTS Audio codec.
• Do not power off while a file is playing.
• Do not use USB cables longer than 3m.
• If you have USB 1.1 Host Adapter, MediaStation is working at USB1.1 speed.
• Handle MediaStation with care. Do not drop or subject to impact or shock.
• We recommend you to use the all supplied cables or accessories that are customized for the best performance of MediaStation.
• Do not expose to liquids, this may cause an electrical shock hazard.
• Keep away from external heat sources.
• Keep away from devices that transmit strong magnetic signal. It may cause data damage or loss on the HDD.
• Do not disassemble MediaStation as you may cause damage and you will invalidate your warranty

4
System Requirements
• USB Requirements
- Windows 2000, XP, Vista / MAC OS 9.0 higher / Linux 2.4.x higher
- Available USB 2.0, 1.1 Port (Recommend USB 2.0)
• Network Requirements
- Windows 2000, XP, Vista
- Available 10/100 Ethernet LAN Port, RJ-45 (Recommend 100Mbps)
Package Content
• Mediastation network multimedia drive, Remote Control (+Battery), Stand, Composite video / Stereo audio cable, USB Cable, External AC
Power Adapter, User manual CD , Quick start guide
Product Overview
1. Use as External USB HDD
1.1 Copy Data via USB
Your MediaStation may be used an external hard drive for your PC once connected via USB port. Once connection via USB port is made video
outputs will be disabled.
* When connecting PC, you have to connect power cable of MediaStation.
①POWER
② PLAY/PAUSE
③ PRE / REW / LEFT
⑥ PWR
⑦ NET
⑧ HDD
⑨ IR
④ NEXT / FF / RIGHT
⑤ STOP / DOWN
①LAN
② USB
③ OPTICAL
⑤ S-VIDEO
⑦ Y, PB, PR
⑨ PWR
⑩ STEREO L-R
⑪ COAXIAL
⑪ CVBS
Back ViewFront View
Front View
①POWER Power On, Off
②PLAY / PAUSE Play all files from selected file / Pause
③ PRE / REW / LEFT Go to the previous page or Rewind / Left key
④NEXT / FF / RIGHT Go to the next page or Fast Forward / Right key
⑤STOP / DOWN Stop / Scroll down key
⑥IPWR Power LED
⑦NET Network LED
⑧HDD HDD running LED
⑨IR IR Receiver
Back View
①USB Connect USB cable
②OPTICAL Connect Optical cable for 5.1 ch. digital audio output
③S-VIDEO Connect s-video for video output
④COAXIAL Connect coaxial cable for 5.1 ch. digital audio output
⑤Y, PB, PR Connect component Y, Pb, Pr cable for video output
⑥LAN Connect Lan cable for networking
⑦PWR Connect power cable
⑧CVBS Connect composite cable for video output
⑨STEREO L-R Connect stereo cable for audio output

5
1.1.1 Windows 2000, XP, Vista
1.1.2 Linux
✓Compatible with Linux 2.4 or higher.
[Automatic Mount]
After booting, do log-in.
Connect MEDIASTATION -> Power On MEDIASTATION -> Check the detection with [fdisk] -> make Mount Pointer (ex. mediatest) at Folder
Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
/dev/sda /mnt/mediatest vfat noauto, user 0 0 (in case of FAT32 HDD)
/dev/sda /mnt/mediatest ntfs noauto, user 0 0 (in case of NTFS HDD)
Do Log-in again.
✓Above example “sda” is assumed that the MEDIASTATION will be detected as “sda” on your system. If not, you have to write the drive name which is detected as “USB Mass Storage”,
not “sda”
[Manual Mount]
Connect MEDIASTATION -> Power On MEDIASTATION -> Check the detection with [fdisk] -> make Mount Pointer (ex. mediatest) at Folder
Mount(/mnt) -> Edit [/etc/fstab] -> add the following;
mount –t vfat /dev/sda /mnt/mediatest (in case of FAT32 HDD)
mount –t ntfs /dev/sda /mnt/mediatest (in case of FAT32 HDD)
✓Above example “sda” is assumed that the MEDIASTATION will be detected as “sda” on your system. If not, you have to write the drive name which is detected as “USB Mass Storage”,
not “sda”
1. After connecting MEDIASTATION and plug power cable, Windows
itself will install driver automatically. And then, check the driver
installation at Windows [Start > Settings > Control panel > (switch
to classic View on Windows XP) > system > Hardware > Device
manager > Universal Serial Bus controllers > USB Mass Storage
Device ].
2. Check ‘My Computer’ or ‘Explorer’, there should be a new volume.
You can copy any data to this volume.
✓ When you see ‘Non High-Speed USB Hub Message’
The message will be displayed On windows XP when you plug MEDIASTATION into USB
1.1 spec. Host adapter.
3. After copying data, remove MEDIASTATION with using remove
icon at Windows right-down corner. If you don’t follow this
procedure, data and MEDIASTATION may have damage.

6
[How to stop using]
Do [unmount] at Device Control.
1.1.3 Mac
No need to install the installation driver at Mac OS 9.x version and the MEDIASTATION will be detected automatically. If the MEDIASTATION
is detected correctly, an icon is appeared at a monitor.
When removing MEDIASTATION safely, drag the icon to a trash and unplug MEDIASTATION.
2. Access PC via Network
2.1 Connect LAN Cable
When connecting with IP Router or HubWhen connecting Computer to MEDIASTATION directly
Connect LAN cable to LAN port between MEDIASTATION and PC. In
this case, you have to use Cross LAN cable type generally.
[TIP] If the computer’s LAN card was connected to Internet line, you
can mount additional LAN card to your PC and connect that additional
LAN card to MEDIASTATION.
Connect LAN cable to LAN port between IP Router or Hub.
In this case, you have to use Direct LAN Cable type generally.
2.2 Set Network Configurations
After connecting LAN cable, you have to set network configurations of Computer and MEDIASTATION.
You need to share a folder on Windows computer and use same ‘IP Address range’ and same ‘Subnet Mask ‘ between Windows computer and
MEDIASTATION. For example,
*It is possible to assign IP address and Subnet Mask of MEDIASTATION as dynamic or static.
Computer MEDIASTATION
IP Address 192.168.1.2 192.168.1.3
Subnet Mask 255.255.255.0 255.255.255.0

7
2.2.1 Windows 2000
5. Moveto[Settings>ControlPanel>AdministrativeTools>Computer
management>Local Users and Groups>Users], and double click
‘Guest’.
4. After that, the shared folder will be displayed as following
picture.
3. Click ‘Permissions’ and check whether “Everyone” account is or
not. If not, add “Everyone” account.
2. Check ‘Share this folder’ and write ‘share name’.
For example, “My Movie”
1. Select a folder which you want to share. Right-click the folder and
click ‘Sharing’ in pop menu.
✓Make sure to write ‘share name’ within 12 characters in English.
✓Recommend only to use ‘Read>Allow’ at Permissions.
6. Check ‘User cannot change password’ and ‘Password never
expires’.
7. Move to [Control Panel>Network and Dial-up Connections], and
select Properties of ‘Local Area Connections’ by right click of
mouse.
✓If you see two or more ‘Local area connections’, select one that you will use for
connecting to MEDIASTATION.

8
9 Check ‘Use the following IP address’, and write ‘IP address’ &
‘Subnet mask’ that you want to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
8. Double click ‘Internet Protocol (TCP/IP)’ that you want to use on
your computer.
✓If you have already been provided dynamic IP address from DHCP Server or IP Router
on your local area network, you don’t need to input IP address.. Use ‘Obtain an IP
address automatically’.
10. Set the network configurations of Mediastation.
✓ You have to connect MEDIASTATION to TV set for this setup. See “3.1.1 Connect
Video Cable”.
Press [SETUP] of remote control for moving to setup screen.
On that screen, select ‘DHCP off’ and write IP address & Subnet
mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving configurations.
<Mediastation IP Address>
✓If you have already been provided dynamic IP address from DHCP Server or IP Router
on your local area network, you don’t need to write static IP address absolutely. Use
‘DHCP on’ or write IP address & Subnet mask that DHCP Server or IP Router provide.
✓Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in MENU screen after selecting
‘PC-Network’ icon in Mode Selection screen.

9
2.2.2 Windows XP
1. Select a folder which you want to share. Right-click the folder and
click ‘Sharing and Security’ in pop menu.
2. Check ‘Share this folder on the network’ and write ‘Share name’.
For example, “My Movie”
5. Check ‘User cannot change password’ and ‘Password never
expires’.
6. Move to [Control Panel>Network connections], and select ‘Local
area connections’ properties by right click of mouse.
3. After that, the shared folder will be displayed as following
picture.
4. Moveto[Settings>ControlPanel>AdministrativeTools>Computer
management>Local Users and Groups>Users], and double click
‘Guest’.
✓Make sure to write ‘Share name’ within 12 characters in English.
✓This is for Windows XP Professional. Windows XP Home users can’t see this figure. Go
to next number 6).
✓ If you can’t find ‘Administrative Tools’ at Control Panel, click “Switch to classic view” in
left-up corner on screen.
✓If you can’t find ‘Administrative Tools’ at Control Panel, click “Switch to classic view” in
left-up corner on screen.
✓If you see two or more ‘Local area connections’, select one that you will use for
connecting to MEDIASTATION.

10
7. Double click ‘Internet Protocol(TCP/IP)’ that you want to use on
your computer.
8. Check ‘Use the following IP address’, and write ‘IP address’ &
‘Subnet mask’ that you want to use.
For example,
IP address: 192.168.1.3
Subnet mask: 255.255.255.0
9. At above number 7) figure, click ‘Advanced’ Tab. Disable ‘Internet
Connection Firewall’.
✓If you have already been provided dynamic IP address from DHCP Server or IP Router
on your local area network, you don’t need to write static IP address absolutely. Use
‘Obtain an IP address automatically on’ or write IP address & Subnet mask that DHCP
Server or IP Router provide.
✓ If you use service pack 2, refer to the following figures.
Click ‘Settings’ at ‘Windows Firewall’
Check ‘Off’ and click ‘OK’

11
10. Set the network configurations of MEDIASTATION.
✓You have to connect MEDIASTATION to TV set for this setup. See “3.1.1 Connect
Video Cable”.
Press [SETUP] of remote control for moving to setup screen.
On that screen, select ‘DHCP off’ and write IP address & Subnet
mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
After writing, press [SETUP] again for saving configurations.
✓If you have already been provided dynamic IP address from DHCP Server or IP Router
on your local area network, you don’t need to write static IP address absolutely. Use
‘DHCP on’ or write IP address & Subnet mask that DHCP Server or IP Router provide.
✓ Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in MENU screen after selecting
‘PC-Network’ icon in Mode Selection screen.
<Mediastation IP Address>
2.2.3 Windows Vista
Before you do “folder sharing”, you need to set up 3 things for Network sharing.
1. Setup of User Accounts and Family safety
a. Click Start > Settings > Control Panel > Users Accounts and Family
safety
b. Make sure the account is “Guest”.
c. If the “Guest” account is off, then switch it to “On”.

12
2. Disable “Firewall”
a. Click Start > Setting > Control Panel > Security > Windows Firewall
on / off
b. Click at ‘Off (not recommended)
3. Setup of Network and Sharing Center
a. Click Start > Setting > Control Panel > Network and Internet >
Network and Sharing Center
b. Select “Password Protected sharing” and select “Turn off password
protected sharing”.
c. make a folder you want to share.
d. You will get a popup “Choose people to share with” then select
“Everyone (All users in this list) and press “Add” button.
e. After you register the user account, then click “Share” button.

13
③Component: Y, Pb, Pr component cable (not supplied)
Red (Pr) Red (Pr) Connect Pr Jack of TV
Blue (Pb) Blue (Pb) Connect Pb Jack of TV
Green (Y) Green (Y) Connect Y Jack of TV
①Composite: Yellow RCA cable. (Supplied)
Yellow (CVBS) Yellow (CVBS) Connect to Composite
(CVBS) Jack of TV
②S-Video: Black rounded cable (not supplied)
S-VIDEO Connect S-Video Jack of TV
3. Use as Multimedia Player
3.1 Connect to External AV Device
3.1.1 Connect Video Cable
MEDIASTATION supports 3 type of video output; “Composite, S-video, Component”. Use video connection that your TV supports. Normally,
TV supports composite video connection, and this package is supplied with a composite video cable.
✓When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.
2. “MG-35S” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is changed.
3. After you see normal screen, you have to save video configurations of MEDIASTATION .See “3.2.1 Video Setup”.

14
③Coaxial: Coaxial cable for Digital 5.1 ch. (not supplied)
②Optical (): Optical Cable for Digital 5.1 ch. (not supplied)
①Stereo: Red & White RCA Cable (supplied)
Red (STEREO-R) Red (STEREO-R)
White (STEREO-L) White (STEREO-L) Connect to Composite
(CVBS) Jack of TV
Connect to Composite
(CVBS) Jack of TV
OPTICAL ()
COAXIAL
Connect Optical Jack of Amplifier or Receiver
Connect Coaxial jack of Amplifier or Receiver.
3.1.2 Connect Audio Cable
MEDIASTATION supports 3 type of audio output; “Stereo, Coaxial, Optical”. Use audio connection that your TV or Audio set supports. Normally,
TV supports stereo audio connection, and this package supplies stereo audio cable
3.2 Basic Setup
3.2.1 Video Setup
This is guide for setting video output of MEDIASTATION. You have to setup MEDIASTATION video output mode same as TV set’s video input
mode.
✓When you can not see normal screen after connecting video cable, check followings,
1. “TV “– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.
2. “MEDIASTATION” – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever press [VIDEO], video output signal is changed.
3. After you see normal screen, you have to save video configurations of MEDIASTATION.
✓When you can not hear sound after connecting Optical or Coaxial Cable, you have to change audio setup of MediaStation as Encoded
Digital. See “3.2.2 Audio Setup”
✓Don’t connect optical and coaxial cable together at the same time.
TV Video Input Mode MEDIASTATION Video Output Mode Connection Jack of TV, MEDIASTATION Video Cable Type
Normal Video
TV Out: NTSC C/S-Video
(HD Component OFF) CVBS or Composite Jack
(Generally Yellow Jack)
Yellow RCA Cable
(Supplied)
TV Out: PAL C/S-Video
(HD Component OFF)
S-Video
TV Out: NTSC C/S-Video
(HD Component OFF)
S-Video Jack S-Video Cable
* Black rounded
TV Out: PAL C/S-Video
(HD Component OFF)
Component 480i
TV Out: NTSC C/YPbPr
(HD Component OFF)
Component 3 Jack
* Y(Green), Pb(Blue), Pr(Red)
Component Cable
* Y(Green), Pb(Blue), Pr(Red)
TV Out: PAL C/YPbPr
(HD Component OFF)
Component 480p HD Component Out On 480p
Component 720p HD Component Out On 720p
Component 1080i HD Component Out On 1080i
✓ NTSC, PAL : Standard of TV Output. Select a proper one for using in your country.

15
3.2.2 Audio Setup
This is guide for setting audio output of MEDIASTATION. You can use Stereo or Digital 5.1 ch..
3.2.3 Network Setup
It is possible to obtain IP address automatically from DHCP Server or IP Router, or set the specific IP address. Check your network
environments.
Setup Procedure
Setup Procedure
①Turn on MediaStation and press [SETUP] on Mode Selection screen.
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
②Move to ‘TV Out’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③Move to Video Output Mode that you want and press [ENTER].
④Finally, press [SETUP] again for saving configurations.
②Move to ‘Audio’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③Move to Audio Output Mode that you want and press [ENTER].
④Finally, press [SETUP] again for saving configurations.
✓ Analogue/DCPM: Select when you connect the supplied audio cables (Red / White) to TV or Audio set directly.
✓ Encoded Digital: Select when you want to listen through 5.1Ch / DTS Dolby by connecting receiver (or amplifier) with Optical or Coaxial cable.
✓DHCP On: You can use this option when it is possible to obtain IP address automatically from DHCP Server or IP Router.
✓DHCP Off: When it is not possible to obtain IP address automatically or you connect to your PC directly without DHCP Server or IP Router, you have to use this option. Just enter the
IP address and Subnet mask.
‘DHCP On’ Setup Procedure
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
② Move to ‘Network’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③ Move to DHCP On and press [ENTER].
④ Finally, press [SETUP] again for saving configurations.

16
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
② Move to ‘Network’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③ Move to DHCP Off and press [ENTER].
④ Move to ‘IP Addr’ and press [ENTER]
IP address Input box will be displayed. Enter IP address with arrow and number button of
remote control. And then, press [ENTER] again.
⑤ Move to ‘Subnet’ and press [ENTER].
Subnet mask Input box will be displayed. Enter Subnet mask with arrow and number
button of remote control. And then, press [ENTER] again.
⑥ Finally, press [SETUP] again for saving configurations.
✓ Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address in MENU screen after selecting
‘PC-Network] icon in Mode Selection screen.
✓Check ‘The specific IP address you wrote’
When you use ‘DHCP off’, you can see the IP address in MENU screen after selecting
‘PC-Network] icon in Mode Selection screen.

17
3.2.4 Screen Setup
This is guide for setting TV Type. You can use 4:3 Letter Box, 4:3 Pan Scan, and 16:9.
3.2.5 Preview Setup
It is possible to enable or disable preview the photo file as a thumbnail image before playing.
3.2.6 LED Setup
It is possible to turn on or off a backlight LED of arrow button on the front side. When the LED disturbs you in night, turn off the LED.
Setup Procedure
Setup Procedure
Setup Procedure
① Turn on MediaStation and press [SETUP] in Mode Selection Screen.
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
② Move to ‘Screen’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③ Move to 4:3 Letter box, 4:3 Pan scan or 16:9 that you want and press [ENTER].
④ Finally, press [SETUP] again for saving configurations.
② Move to ‘Preview’ icon and press [ENTER]. Setup box will be displayed under icon
menu.
③ Move to Photo preview on or off that you want and press [ENTER].
④ Finally, press [SETUP] again for saving configurations.
② Move to ‘LED’ icon and press [ENTER]. Setup box will be displayed under icon menu.
③ Move to LED on or off that you want and press [ENTER].
④ finally, press [SETUP] again for saving configurations.

18
3.3 Basic Screen Menu
3.3.1 Mode Selection, Media Type Selection
After turning on MEDIASTATION, you can see Mode Selection screen. In this screen, you can select Built-in HDD or Networking Computers.
Just press [ENTER] after moving to the icon with WX arrow button.
✓If there is no HDD or networking PC, the icons are not activated.
1. Use Built-in HDD
2. Use Networking Computer
① [Mode Selection] Move to ‘MediaStation’ icon and press [ENTER] for playing built-in
HDD’s files.
① Turn on MediaStation and press [SETUP] in Mode Selection screen.
② [Media Type Selection] Select a media type which you want to play and press
[ENTER].
- Movie: Select when playing Video files
- Music: Select when playing Music files
- Photo: Select when playing Photo files
- List: Select when making a play list including video, music, photo files
- Setup: Select when moving to setup screen.
② [Media Type Selection] Select a media type which you want to play and press
[ENTER].
- Movie: Select when playing Video files
- Music: Select when playing Music files
- Photo: Select when playing Photo files
- List: Select when making a play list including video, music, photo files
- Setup: Select when moving to setup screen.
③ [Computer list on network] Computer list on network will be displayed. Move to a
computer and press [ENTER].

19
3.3.2 File Selection
After selecting a Media type, ‘File Selection’ screen will be displayed. Move to a file that you want to play and press [ENTER] or [PLAY/
PAUSE].
☞[ENTER] button Play one file that you select. After finishing playback, return to ‘file selection screen’.
☞[PLAY/PAUSE] button After playing the file that you select, play next all files continuously.
☞WX button Move to files with pressing TS arrow buttons.
☞Wbutton Return to up directory with pressing Warrow button.
☞Xbutton Go to ‘Icon Menu Tray’ placed at the top of screen with pressing Xbutton. In order to return to file selection screen, press T
arrow button or select Exit icon.
☞NEXT XXI, PREV IWW button Move to Next or Previous page when there are too many files to list on one screen.
☞Icon Menu Tray Descriptions
Go to ‘Icon Menu Tray’ placed at the top of screen with pressing Xbutton. In order to return to file selection, press Tarrow button or select
‘Exit’ icon.
Back: Return to directory
Allplay: After the file that you select has finished all files will be played continuously. It has the same action as pressing the [PLAY/PAUSE] button.
Menu: Return to Media Type screen
Exit: Exit Icon Menu Tray and return to file selection screen.
Icon Menu Tray

20
3.4 Play Video Files
It is possible to play video files like AVI, MPG, MPEG, DAT, M2V, and VOB.
Select ‘Movie’ icon in Media Type Selection screen. Video file list will be displayed. Just move to a file and press [ENTER] or [PLAY/PAUSE]
button.
Function and Button Descriptions
Select ‘Movie’ icon in Media Type Selection screen. Move to a file and press [ENTER] or [PLAY/PAUSE] button. Press [ENTER] for playing just
the file or [PLAY/PAUSE] for playing all files from the selected file.
Remote Control Function Descriptions
AUDIO Dual Audio It is possible to switch each audio language when the audio format is dual-audio, for example, including a local
language and English.
SUBTITLE
Subtitle - Move & Size It is possible to change subtitle size and location.
WX arrow button changes size and TS arrow button changes location. To confirm press [ENTER].
Subtitle - Select or Hide The subtitle name same as video file is displayed on screen automatically. However, it is possible to open the other
preferable subtitle files or hide.
Subtitle - Language Select
It is possible to switch each subtitle language when the subtitle is dual language format, for example, including a
local language and English.
* When selecting ‘Discriminating subtitle language’, first subtitle language will be displayed.
Subtitle - Sync. It is possible to set the subtitle sync. with WX(one second) TS(60 second) when motion and subtitle sync are not
matched.
4, 5, 6
Number Button Subtitle - Colour Change Subtitle colour is changed by pressing number 4 or 6 button.
In order to return default colour (white), press number 5.
Scr. SIZE
Zoom Vertical Zoom screen vertically.
Zoom Full Enlarge the overall screen.
Custom Enlarge or reduce the screen by STWX arrow buttons.
Default Return to original screen size and position.
Screen Position Move the screen to the direction with STWX arrow buttons. Press [Brt.Cont] key to return to the original screen
position when applying Screen position.
TIME SEARCH Jump to Preferable Playback Time Move to a selected time of a file.
CANCEL Delete Input Numbers In time search box, this button deletes all numbers in 0.
Brt. CONT Control luminosity, colour depth,
brightness When pressing this button, 3 modes switch. After selecting a mode change settings with TS arrow buttons.
FILE INFO Show File Information Show the file information which is being played. In order to hide the information, press this button again.
FF XX Fast Forward Whenever pressing this button, play speed is changed with 8x, 16x, 32x in forward.
Xarrow button
REW WW Rewind Whenever pressing this button, play speed is changed with 8x, 16x, 32x in backward.
Warrow button
VOLUME + Volume Up Volume up.
Sarrow button
VOLUME - Volume Down Volume down.
Tarrow button
MUTE Sound Off Mute the sound. In order to hear sound press this button again.
ENTER Playback a File Play a file. After finishing playback return to file selections screen.
PLAY / PAUSE XII Playback Next All Files After the file that you select has finished all files will be played continuously
PLAY / PAUSE XII Pause Pause playback, if pressing this button when a file is being played. In order to play again, press this button again.
PREV IWW Playback Previous File Play a previous file before a current playback file. If you used [ENTER] for playback, you can not use this function.
This is available in playing all files as using [PLAY/PAUSE] button or ‘ALLPLAY’ icon.