CHANGING CAMERA SETTINGS
VIEVU2settings such as video resolution or date and time can be changed by:
1. Using the VIEVU®app with a compatible smartphone. The VIEVU®app can be downloaded from your
phone’s app store.
2. Using a computer with the VIEVU2 Conguration Utility. The Conguration Utility can be downloaded from
www.vievu.com/support.
RESET SWITCH
If the camera fails to function correctly, it may need to be reset. Gently insert the end of a paperclip into the
hole and hold down the button for 1 second. Video les will not be deleted during a reset.
PRODUCT WARRANTY
Company warrants to purchaser that the Products purchased here under shall be free from defects in
materials and workmanship and shall conform in all material respect to the specications for a period of
ninety (90) days from the date of delivery thereof, provided the Product in question has been stored and
used in accordance with ordinary industry practices and conditions. The use of non-Company branded or
approved accessories or replacement parts may result in damage not covered by warranty. Company does
not warrant that the operation of the products will be uninterrupted or error free.
Remedies. In the event that a Product does not comply with the product warranty set out above and such
non-conforming Product is returned to Company within the warranty period by Purchaser freight prepaid,
Company will repair or replace such non-conforming Product at no additional charge to Purchaser; the
repaired or replaced Product will be returned to Purchaser, freight prepaid.
Disclaimer of Warranties. The foregoing express warranties are limited to company and are not
transferable and are in lieu of any other warranty by Company with respect to Products furnished
hereunder. Company grants no other warranty, either express or implied, including without limitation,
warranties or merchantability or tness for a particular purpose.
Limitation of Liability. Company shall in no event be liable for any indirect, incidental, special or
consequential damages arising out of or relating to the sale or use of its products, whether or not
Company has advance notice of the possibility of such damages. If company breaches any
provision of this agreement, purchaser’s sole and exclusive maximum liability, whether based in contract,
tort or otherwise, shall not in any event exceed the contract price for the particular products.
CAUTION
Risk of explosion or re if battery is disassembled, punctured, cut, crushed, short-circuited, incinerated, or
exposed to water, re, or high temperatures. Properly dispose of used batteries in accordance with local
regulations.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/television technician for help.
Important: Changes or modications to this product not authorized by VIEVU®could void the
electromagnetic compatibility (EMC) and wireless compliance and negate your authority to operate the
product. This product has demonstrated EMC compliance under conditions that include the use of
compliant peripheral devices and shielded cables between system components. It is important that you use
compliant peripheral devices and shielded cables between system components to reduce the
possibility of causing interference to radios, televisions, and other electronic devices.
VIEVU®
105 W. John Street
Seattle WA 98119
www.vievu.com Sq_RevB
