Visonic GSD-442 PG2 User manual

GSD-442 PG2
PowerG Wireless Carbon
Monoxide (CO) Detector
•Gives early warning of carbon monoxide (CO)
poisoning danger, providing visual and audial
alarm indications when CO is detected
•Loud built-in alarm buzzer (95db) and a
largeashingLED
• Continuous auto-testing and manual testing
•Easywallorceilinginstallation(with
bracket); no need for cabling work
•Simple battery replacement
•Back tamper
•PowerG two-way Frequency Hopping Spread
Spectrum FHSS-TDMA technology - provides
robustness and reliability closer than ever to
wired
•Large transmission range enabling repeater-
free installations
•Visible link quality indication shown on the
device
•Compatible with PowerMaster systems and
PowerG receivers
•Fullycertiedbythemoststrictand
demanding international standards for
safetyproductsinEurope(LPCBUK,
EN50291)andUSA(UL2075)
Specications:
Battery type: 9V lithium battery
or alkaline battery,
Weight
(including battery):
180g (6.35oz)
Operating
temperature:
0°C to 40°C
(32°F to 104°F)
Operating
environment:
Indoor
Dimensions: 127 x 40mm
(5 x 1.6in.)
GSD-442PG2isawirelessCOdetector
that gives early warning of CO
poisoning danger, preventing damage
to vital organs and even death. When
CO is detected, GSD-442 PG2 sends
alerts to the PowerMaster control
panel. A central station or private
numberisthenimmediatelynotied.
This enables a rapid and effective
response to the emergency.