Vispera 40SOLO1 User manual

2018
The terms HDMI and HDMI High -Definition
Multimedia Interface,and the HDMI Logo are
trademarks or registered trademarks of HDMI
Licensing Administrator, Inc in the United States
and other countries.
40SOLO1 Television
USER MANUAL

1
CONTENTS
Important Safety Instructions
Safety Information
Preparation
What is Included
Front View
Rear View
Installing the Stand
Removing the Stand for Wall-Mounting
Wall-Mounting Screws
Remote Control
Connecting External Devices
Basic Operations
First Time Installation
Quick Settings
Picture
Sound
Channel
EPG
Nextwork
Time
System
Movies
Music
Photos
Sources
CI (Common Interface)(DTV mode)
Parental Control
Troubleshooting
Maintaining
Plug Replacement-UK
Specification
Disposal Information
2
3
4
4
5
6
7
7
7
8
10
11
11
13
14
16
18
21
24
25
27
30
31
32
33
34
35
36
38
38
39
39

2
IMPORTANT SAFETY INSTRUCTIONS
•Read these instructions – All the safety and operating instructions should be read before this product is
operated.
•Keep these instructions – The safety and operating instructions should be retained for future reference.
•Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
•Follow all instructions – All operating and use instructions should be followed.
•Do not use this apparatus near water – The appliance should not be used near water or moisture – for
example, in a wet basement or near a swimming pool, and the like.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
ampliiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If the provided plug does not it into your outlet, consult
an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
• Only use attachments/accessories speciied by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table speciied by the manufacturer,or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
• Please keep the unit in a well-ventilated environment.
•WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing. Objects illed with liquids,
such as vases should not be placed on apparatus.
•WARNING: The batteries shall not be exposed to excessive heat such as sunshine, ireor the like.
•WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily
operable.
•WARNING: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualiied personnel.
This lightning lash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-
insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance instructions in the literature
accompanying the appliance.
This equipment is a Class II or double insulated electrical appliance. It has been designed
in such a way that it does not require a safety connection to electrical earth.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI LicensingAdministrator,
Inc in the United States and other countries.

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of
properly, have potential adverse efects on the environment and human health.
Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected
separately. As a consumer, you are responsible for ensuring that this product is disposed ofproperly.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instruction.
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in
this user guide, especially the safety information below.
Electrical Safety
• The TV set should only be connected to a main power supply with voltage that matches the label at the
rear of the product.
• To prevent overload, do not share the same power supply socket with too many other electronic
components.
• Do not place any connecting wires where they may be stepped on or tripped over.
• Do not place heavy items on any connecting wire, which may damage the wire.
• Hold the main plug, not the wires, when removing from a socket.
• During a thunderstorm, or when not using the television for extended period of time, turn of the power
switch on the back of the television.
•Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas, such
as bathrooms, steamy kitchens or near swimming pools.
• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged, liquid is
spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything accidentally
penetrates the ventilation slots or if the TV set does not work normally.
•Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the unit
yourself is dangerous and may invalidate the product’s warranty. Qualiied personnel must only service
this apparatus.
•To avoid a battery leakage, remove batteries from the remote control, when the remote is not use for long
period, or when the batteries are exhausted.
•Do not break open or throw exhausted batteries into a ire.
• For best results, use type AAA (example-alkaline, carbon-zinc, etc.) batteries.
• Install only new batteries of the same type in your product.
• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the
life of the batteries or cause batteries to leak.
• Do not mix old and new batteries.
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel MetalHydride)
batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.
• Do not attempt to recharge disposable batteries.
• Do not short circuit battery terminals.
• Keep away from children.
Physical Safety
•Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at least
5cm (2’’) clearance all around.
• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the
remote control.
• To clean the TV use a soft dry cloth. Do not use solvents or petroleum based luids.
• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including
ampliiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide
blade, or the third prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs.
• Unplug the apparatus during lightning storms or when unused for long periods.
• Refer all servicing to a qualiied service personnel. Servicing is required if the apparatus does not operate
normally or if the apparatus, including the power supply cord or plug, has been damaged in any way.
• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when the
apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.
3
SAFETY INFORMATION

4
Remote Control with BatteriesTV Set
PREPARATION
What is Included
User Manual &
Quick Start Guide
Base Stand Screws x4
MINI YPBPR cable
User Manual
MINI AV cable

5
PREPARATION
Front View
•
•
•
•VOL +/- button
Press to adjust the volume.
CH / button
Press to select the channel.
Menu button
Display the main menu.
Source button
•STANDBY button
Switch the TV between On/Standby mode.
•POWER Indicator
Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.
•IR (Infrared Receiver)
Receive IR signals from the remote control.
POWER Indicator
IR (InfraredReceiver)

6
PREPARATION
Rear View
1. Power Cord
Connect to AC power outlet.
2. LAN
Network connection port.
3. SCART Socket
Connect to SCART cable between
the SCART socket on the TV and the
SCART socket on the external device.
4. COAX
Connect a digital sound system to this
jack.
5. DTV/TV Input
Connect to the antenna (75Ω VHF/UHF)
socket with the RF coaxial cable.
6. HDMI Input
11. Headphone Socket
Connect to the Headphones.
output device.
7. USB Input
Connect to a USB storage device to play
8. MINIAV
Connect to the composite VIDEO and
AUDIO (L/R) output sockets on external
video devices.
9. MINI YPBPR
Connect to AV devices with component
(Y/Pb/Pr) video and audio output
sockets. COMPONENT&VIDEO share
with AUDIO IN(L/R)subscribe to.
10. CI Slot
Used to insert a CI card. A CI cardallows
you to view all the channels that you
subscribe to.
21 3
7
11
10
9
8
4 5 6
6

PREPARATION
Installing the Stand
1.
cushioned surface to avoid damaging
or scratching.
2.Fix the stand assembly to the TV using
the 4 pcs provided screws.
Removing the Stand for Wall-Mouting
1.
cushioned surface to avoid damaging
or scratching.
2. Untighten the 4 pcs screws holding
the stand assembly and remove them.
3.Attach the wall-mount bracket to the
TV using the mounting holes on the
back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
Wall-Mounting Screws
•Mount the VESA bracket using 4*M6*10 isometric threaded screws (not included).
accordance with the installation instruction.
WARNING:
Never place a television set in an unstable location. A television set may fall, causing
serious personal injury or death. Many injuries, particularly to children, can be acoided by
taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture(for example, cupboards or bookcases)
without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between
the television set and supporting furniture.
• Attention should be drawn to the environmental aspects of battery disposal.
• Educating children about the dangers of climbing on furniture to reach the
television set or its controls
If your existing television set is being retained and relocated, the same considerations
as above should be applied.
7

8
PREPARATION
Remote Control
1. : Switch the TV between and standby
mode.
2. : Mute and restore your TV sound.
3. 0~9: Select a program.(ATV/DTV mode).
4. CH.LIST: Display channel list.(ATV/DTV
mode).
5. : Return to previous viewing channel.
6. P.MODE : Select picture mode:
standard/ mild/ personal/ dynamic.
7. S.MODE : Select sound mode: standard/
music/ movie / personal.
8. ASPECT: Select from the following
mode settings: 16:9/Zoom1/Zoom2/
Auto/4:3.
9. TV.RD: Select TV program or Radio
program.(DTV mode).
10. MENU: Display the OSD(on screen
display) menu.
11. SOURCE: Select among the diferent
input singal sources:Antenna/Cable/
Satellite/ATV/AV/YPbPr/HDMI/PC/
Media Player.
12. OK: Conirm the selection in theOSD(on
screen display) menus.
13. : Allows you to navigate the
OSD menus and adjust the syestem
setting to your perference.
14. DISPLAY: Display the present screen
information such as the current channel
and the input source .
15. EXIT: Exit the OSD menu.
16. EPG: Display the EPG(Electronic
Program Guide).(DTV mode).
17. VOL+/-: Adjust the volume.
18. CH+/-: Select a channel.
19. : Record the current programme.
(DTV mode)
20. : To start or pause the timeshift
playback.(DTV mode).
To start playback or pause.(USB mode).
TIMESHIFT: Start the time-shift function.
(DTV mode).
3
4
10
17
29
27
28
14
16
20
21
22
12
6
9
11
15
18
19
23
24
25
26
30
31
32
13
5
7
8
21

9
PREPARATION
Remote Control
21. : To skip to the beginning of the previous chapter/track/photo.(USB mode).
TTX : Turn on and of the Teletext function.(ATV/DTV/AV/YPBPRmode).
22. : To reverse playback rapidly.(USB/DTV mode).
CANCEL : To cancel the teletext mode.(ATV/DTV/AV/YPBPR mode).
23. : To skip to the beginning of the next chapter/track/photo.(USB mode).
HOLD : Freezes a multi-page passage on screen in teletext.(ATV/DTV/AV/YPBPR mode).
24. : Press to stop the playback, the time shift or the recording.(USB/DTV mode).
FAV : Display the Favourite Channel list.(ATV/DTV mode).
25. : To advance playback rapidly.(USB/DTV mode).
REVEAL : Reveals hidden information such as the answer to a quiz in teletext.(ATV/DTV/
AV/YPBPR mode).
26. COLOUR BUTTON:Access to corresponding function in APP service.(ATV/DTV/AV/
YPBPR mode)
27.SIZE : To enlarge the picture on the TV in teletext.(ATV/DTV/
AV/YPBPR mode).
28. INDEX : To select the page number of the index from teletext.(ATV/DTV/
AV/YPBPR mode).
29. NICAM : Switch between diferent audio channels.(only applicable when the TV
programme has this feature).
LANG : Select DTV audio language.(DTV mode).
30.SUBPAGE : Switch between diferent audio channels.(ATV/DTV/ AV/YPBPR mode).
31.SUBTITLE : Display the subtitle which is broadcast wiht the program.(DTV mode).
32.SLEEP : Set the TV sleep timer.

10
CONNECTING EXTERNAL DEVICES
Coaxial Cable

Connect an RF cable from the Tv’s input called “RF-In” and to your TV Aerial socket
Press OK button to select the Start Setting.
Press 【▼】/【▲】/【◄】/【►】button to select the
language. Press OK button to sure.
Press 【▼】/【▲】/【◄】/【►】button to select the
country. Press OK button to sure.
BASIC OPERATIONS
First Time Installation
11

Press OK button to into home page.
Press 【▼】/【▲】/【◄】/【►】button to select the default
source. Press OK button to sure.
12
BASIC OPERATION
Press 【◄】/【►】button to select the environment.
Press OK button to sure.

1. Press【▼】/【▲】to select:Audio Language/Subtitle Language/Record List/Event
List.
2. Press OK to adjust or select.
Audio Langua Select the audio language.
Subtitle Language Select the subtitle language.
Record List View the program list you have record.
Event List View the event list that you have make an appointment to record.
Press 【◄】/【►】button to select Quick Settings .
Press OK to enter setting.
13
BASIC OPERATION
Quick Settings

1. Press【▼】/【▲】to select:Picture Mode/ Aspect Ratio/Advanced
Settings
2. Press【◄】/【►】to adjust or select.
Picture Mode
Press 【▼】/【▲】button to select Picture Mode, then press【◄】/【►】button to
select. (Optional:Standard /Personal/ Dynamic/ Movie/ Economy)
Standard
Personal
Dynamic
Movie
Economy
The default mode, to make users experience high-quality images under normal light.
Personal-defined picture settings.
Image colors more beautiful, more vivid picture.
This mode is more suitable for watching movies.
Reduce screen brightness, improved contrast for energy saving.
(NOTE:The Brightness/ Contrast/ Colour/ Tint / Sharpness/ Backlight function could be adjusted
only in Personal picture mode.)
14
BASIC OPERATION
Picture
Press 【◄】/【►】button to select PICTURE .
Press OK to enter setting.

Aspect Ratio
Select the picture size: Auto/ 16:9/ 4:3/ Zoom1/ Zoom2
Advanced Settings
Select the settings:OverScan/ Colour Temperature/ Dynamic Contrast/ Noise Reduction.
Over Scan Select ON/OFF.
Colour Temperature Select to adjust the overall color of the image: Standard/ Cold/ Warm
Dynamic Contrast Select to adjust image contrast: ON/OFF.
Noise Reduction Select to eliminate image noise intensity: Off/ Low/ Medium/ High
15
BASIC OPERATION

elect
Sound Mode
ess 【 】 / 【 】 utt elec Sound Mode
t al Sta da dus c S t e e s
e ess【 】/【 】 utt al )
.
elec
es 【】/ 【 】 utt
es OK tte ett
u d/ S eake A Ad a ce ett s1. ess【▼】/【▲】t select:S u
2. ess【 】 /【 】 t djus elect
de Su u
Standard
Music
Sports
Movie
Personal
le ts
us ca a s
ala ce u
a u d
ud
as c u e e ce
duce
ese e
a ce cal
a ce e l
elec ust ctuett s
16
BASIC OPERATION
Sound

Digital Audio Output Select PCM/ RAW/ Off.
Digital Audio Delay Adjust the delay time.
Lip Sync Adjust the Lip Sync.
AVC
Press 【▼】/【▲】button to select AVC, then press【◄】/【►】button to choose ON/OFF.
(NOTE:After opening the AVC,Once the volume is set, regardless of any difference TV Version printed
on each channel, it can make the speaker volume remained stable.)
Advanced Settings
Select the settings:Balance/ Equalizer
Balance Adjust the balance of left and right channel output.
Equalizer Adjust the equalizer.
Audio Description Select description On/Off.
Surround Sound
Set the Surround Sound control.Select ON/OFF.
Speaker
Set the Audio Out/ Digital Audio Delay.
17
BASIC OPERATION

Auto Scan
Press【▼】/【▲】button to select Auto Scan, press OK to search program
automatically.
Analogue
1. Press【▼】/【▲】to select:DVB Antenna/Auto Scan/Digital Manual Scan/CAM
Setting/ Signal Information.
2. Press【◄】/【►】to adjust or select.
Digital
Digital+Analogue
18
BASIC OPERATION
Channel
Press【◄】/【►】button to select Channel.
Press OK to enter setting.