Vivo MOUNT-SONOS3W User manual

Wall Mount Designed for Sonos Arc Soundbar
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-sonos3w
SKU: MOUNT-SONOS3W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x2)
Mounting
Bracket
B(x1)
Center Bracket
C(x4)
M6x8
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
D(x2)
Knob
E (x1)
4mm Allen
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
W-A (x4)
ST4.8x50
W-B (x4)
Ø8x40 Concrete
Anchor
TOOLS NEEDED
Phillips
Screwdriver
Drill Level Pencil

3
ASSEMBLY STEPS
STEP 1
Assemble the mounting brackets (A) to the center bracket (B) using M6x8 bolts (C), and tighten with
the Allen wrench (E). The open slots and square cutout must all be facing up.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 22lbs
(10kg)

4
STEP 2
OPTION A: Wood Wall
Place the assembled mount against the wall, no less than 5.5” (140mm) below the TV, and mark drilling
locations with a pencil. Use of a level is recommended. Mark four drilling locations for a wood panel
wall, or two locations for a wood stud wall (use of a stud nder is recommended). Drill 2.2” (55mm)
deep holes using a 1/8” (3mm) drill bit, then install the mount using ST4.8x50 screws (W-A) using a
Phillips screwdriver.
1/8”
1/8”

5
STEP 2 (Continued)
OPTION B: Concrete/Brick Wall
Place the assembled mount against the wall, no less than 5.5” (140mm) below the TV, and mark four
drilling locations with a pencil. Drill 1.8” (45mm) deep holes using a 5/16” (8mm) drill bit, press ST8x40
concrete anchors (W-B) into the holes, then install the mount using ST4.8x50 screws (W-A) using a
Phillips screwdriver.
5/16”

6
STEP 3
Screw the knobs (D) into the back of the Sonos Arc soundbar.

7
STEP 4
Hang the Sonos Arc soundbar over the top of the mount, making sure the knobs (D) are inserted
into the slots.

LAST UPDATED: 08/31/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oce hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oce hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oce hrs): 5M 4S
309-278-5303