Vivo MOUNT-KB05HD User manual

Dark Walnut/Black Clamp-on Height Adjustable
Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05hb
SKU: MOUNT-KB05HD
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
A(x1)
Keyboard Tray
B(x2)
Slider Bracket
D(x2)
Support Bracket
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
STEP 1
Assemble Slider Brackets (B) to the Support Brackets (D) using M4x7mm Screws (S-A), making sure the
countersunk holes on Support Brackets (D) are facing outward, as shown below. Tighten with a Phillips
screwdriver.
C(x2)
Clamp
E(x2)
Pad
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
S-A (x6)
M4x7mm Screws
S-B (x8)
M5x12mm Screws
S-C (x6)
M5x8mm Screws
PACKAGE CONTENTS
S-A
DB
NOTE: Clamp can be oset using the extra holes in Slider Brackets (B) to allow the tray to be pulled out an extra 1.2”
(30mm) when in use. If mounted this way the tray will sit further out from desk edge.
NOTE: Countersunk holes
should be facing outward.

3
STEP 2
Assemble Slider Brackets (B) with Support Brackets (D) to the Keyboard Tray
(A) using M5x12mm Screws (S-B), and tighten with a Phillips screwdriver. The
Support Brackets (D) must be on the opposite end from the center cable guide.
STEP 3
Assemble Clamps (C) to Support Brackets (D) at desired height using M5x8mm Screws (S-C). Tighten
with a Phillips screwdriver.
STEP 4
Place Pads (E) on the underside of each Clamp (C). Place assembled keyboard mount on edge of
desk and tighten clamps. NOTE: To ensure keyboard tray is level, do not over-tighten clamps. Slide
keyboard tray forward/back to desired position.
Desktop
S-B
A
B
C
D
S-C
E
C

LAST UPDATED: 08/09/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303