Vizio M160MV User manual

CONNECTING TO DEVICES
What’s In the Box
• VIZIO HDTV
• VIZIO Remote Control (including 2 AAA batteries)
• User Manual (read Safety Guidelines)
• Registration Card
• Quickstart Guide
• AC/DC Power Adapter
• Screen Cleaning Cloth
BEFORE YOU BEGIN
HDTV TIPS
HIGH DEFINITION
HOME THEATER
BACK OF TV
1. Get a VIZIO Blu-ray™ Disc Player.
2. Contact your cable company or satellite
provider to learn more about HD
programming in your local area (an HD
cable box or satellite receiver may
be required).
3. You may be able to get HD signals using
an off-air antenna. To see if you can
receive off-air HD signals, and for help
choosing the right antenna, visit
www.antennaweb.org
Visit www.VIZIO.com or call [phone].
HIGH-DEFINITION SOUND
Complete your total Home Theatre experience with stunning
audio from VIZIO accessories such as the Sound Bar
with Wireless Subwoofer.
Make sure you have components with HDMI
outputs to ensure the BEST possible picture.
SATELLITE / CABLE GAMING CONSOLE BLU-RAY™ / DVD
1
3
POWER THE TV
Just lightly touch the Power button on your HDTV
to turn in on, or press the Power button on the
remote control.
The touch-sensitive TV controls will then light up when your
hand approaches the TV.
YOU DESERVE
THE BEST!
VIZIO Blu-ray™
Bring your movies to life!1080p Full HD playback
delivers crystal clear images with lifelike detail and High
Definition Audio puts you in the center of the action.Visit
www.VIZIO.com for more details.
4
The inputs listed in the BEST column are OPTIMIZED for High Definition Video
and Audio. Connect using these inputs wherever possible.
3 WAYS TO WATCH
HIGH DEFINITION VIDEO
Preparing the TV for Wall Mounting - please refer to "Wall mounting
your HDTV" in your User Manual for more information.
We provide professional installation services. Visit www.VIZIO.com or
call [phone] to order today!
INSTALLING YOUR HDTV
Attaching the Stand Base to the TV
1. Place the TV face down on a soft, flat surface.
2. Line up the stand base with the stand neck
(attached to the TV) and carefully push the base
onto the neck.
3. On the bottom of the stand base, turn the
thumbscrew and tighten snugly (see Fig. 1).
4. Move the TV into an upright position and place so that the rear connectors
remain accessible.
*Tested and certified by VIZIO engineers for compatibility with your TV.
©2010 VIZIO Inc. 50650A166400R(A)XXX
M160MV
LED LCD HDTV
HDMI DTV/TV
HIGHEST DIGITAL
QUALITY PICTURE
PICTURE QUALITY
CONNECTION TYPE
CONNECTOR IMAGE
ANALOG HD
QUALITY PICTURE
LOW RESOLUTION
NOT RECOMMENDED
CONNECTION
ADVICE BETTERBEST GOOD
COMPONENT AV/S-VIDEO
2
FIG. 1
HDMI
DTV/ATV
RGB PC
USB
AUDIO
YPb Pr V L R
AVCOMPONENT
For more information about VIZIO Certified* High Definition
cables please visit us at: www.VIZIO.com
MAKE THE BEST
HIGH DEFINITION
CONNECTION!
VIZIO HIGH DEFINITION CABLES
MATCH YOUR VIZIO TO A CERTIFIED* WALL MOUNT
XMF1300
ULTRA SLIM
FLUSH MOUNT
ULTRA SLIM
TILT MOUNT
Full Articulating
Mount
XMT1200 / XMT500 XMA1200 / XMA500

HELP TOPICS
SETUP(Cont.)
M160MV LED LCD HDTV QUICKSTART GUIDE
1. The Initial Setup menu should appear on-screen. Select your desired
language (see Fig. 1).
2. Follow the menu instruction using your remote control to initialize the
process. Choose Home Mode for optimal energy savings.
5
EXTENDED
WARRANTIES
LEARN MORE
REGISTER NOW
Register your product today and receive the latest VIZIO news
and special offers.
Protect your VIZIO product with up to 5 years of added
repair service! Extended coverage begins when the
manufacturer's warranty expires so you’ll receive
maximum protection!
Visit us online at:
or Call:
For more info on Extended Warranties
Refer to your User Manual for in-depth descriptions or
more information.
(888) 849. 4623 www.VIZIO.com
www.VIZIO.com
No Power
Picture is blurry or fuzzy/
image quality issues
Cannot change channels up and
down with direct cable hookup
from wall or antenna
Cannot return to the Setup Wizard
Screen is displaying blue/no
signal and/or turning off after a
few seconds
Panoramic mode is not available
Black or gray bars on top, bottom,
and/or sides of picture
PROBLEM SOLUTION
Make sure the power button is ON . Make sure the AC power cord is securely connected to the AC socket and try plugging the TV
directly into the wall. Plug another electrical device (like a radio) to the outlet to verify the outlet is supplying power.
For the best image quality, view HD wide screen programs where possible. If HD content is not available, view Standard Definition
from a digital source. Standard analog TV will always be noticeably inferior to HD because your digital flat panel TV has video that
is many times better than old TVs, and thus you can see interference and deficiencies you did not know you had.
Press the MENU button. Use the arrows to navigate to the TV TUNER MENU. Highlight the first option, called Tuner Mode. Select the
appropriate input by using the left and right arrows. Once Tuner Mode is correct, highlight "AutoSearch", then press the right
arrow.
The Setup Wizard is no longer accessible after being run once, but all of the same settings can still be changed. Press the MENU
button to access them. For channel scan, see the above topic.
Your TV may be on an inactive input. After powering on the TV, press the INPUT button on your remote repeatedly until a picture
re-appears. If this does not work, try it a second time but press the button slower this time; it can take as long as 30 seconds for
the image to reappear.
When the TV displays an HD resolution the Panoramic viewing mode will not be available.
Try setting your TV to wide or zoom mode; the image should fill the screen. If you still see bars, they are part of the image the TV is
receiving. Cable and satellite boxes may add black bars to the picture, especially when HDMI cables are used. For more
information, please contact your service provider.
PROGRAM YOUR CABLE OR SATELLITE REMOTE
Call your Cable or Satellite provider to determine if you need a 3, 4 or 5-digit code. Refer to the following chart of VIZIO codes and follow your provider's instructions to program your Cable or Satellite remote.
SERVICE PROVIDER
CABLE 11758, 10178, 10128 1758, 0178, 0128
DIRECT TV
DISH NETWORK 627
11758, 10178, 10128 1758, 0178, 0128
5-DIGIT CODES 4-DIGIT CODES 3-DIGIT CODES
IF YOU’RE CONNECTING USEING A CABLE OR
SATELLITE BOX:
1. Exit the Setup Wizard.
2. Select your input source to match the device you’re connecting to.
3. You’re done! Enjoy the show.
IF YOU’RE CONNECTING USING A CABLE FROM
THE WALL OR ANTENNA:
1. Choose between Antenna or Cable to match your input source (see Fig. 2).
2. Begin the scan for channels (see Fig. 3).
Note: Your Service Provider may provide access to HD channels during the channel scan.
Please be patient and wait for 100% completion.
3. Once the scan is complete, follow the on-screen instruction to exit the
Initial Setup menu (see Fig. 4).