Vuly 360 Pro User manual

Visit www.vulyplay.us/install
for step by step video instructions, or scan this QR code:
MANUAL
SAFETY INFORMATION, INSTALLATION, CARE AND MAINTENANCE
INSTRUCTIONS. READ PRIOR TO ASSEMBLING AND USING THE PRODUCT.
Vuly cares about safety. Adult supervision is required at all times whilst
equipment is in use.
ATTENTION!
If you have any feedback regarding our instructions, feel free to email
[e-mail] so that we can continue to improve.
360 Pro™Max Cubby House + Swing Set

Contents
Read and follow all instructions in this manual before
using your play set, and do not use the Cubby House or
any Swings in any way that is not described in this manual.
Responsibility rests with the owner and supervisors of
the play set to make sure that all users are aware of the
practices specified in this manual.
1.0. Care and Maintenance
2.0. Safety Information
2.1. Select protective surfacing
2.2. Poured-in-place surfaces or pre-manufactured rubber tiles
2.3. Placement
3.0. Operating Instructions
4.0. Pre-assembly
4.1. Due Care when Installing Product
5.0 Parts checklist
6.0. Assembly instructions – Cubby
7.0. Product registration
8.0. Half-price replacement parts
9.0. Warranty
9.1. Warranty periods
9.2. Inclusions
9.3. Exclusions
9.4. Warranty Claims
9.5. Consumer Law
10.0. Missing parts
4
4
4
4
4
5
5
5
6
9
38
38
38
38
38
38
39
39
39
Vuly Play
95 Ingleston Rd, Brisbane QLD 4154
AU: 1300 667 514
US: 1-800-467-1421
www.vulyplay.us
ATTENTION!
Safety information, installation and use instructions.
Read prior to installing and using the swings.
See vulyplay.us/support for any updates to these
instructions.

3
RISK WARNING:
The use of the Product involves a significant risk of
participants suffering personal injury including the
possibility of serious injuries, permanent disability or
death. All participants who engage in activities with the
Product do so at their own risk.
ADULT SUPERVISION IS REQUIRED AT ALL TIMES WHILST EQUIPMENT IS IN USE.
VULY CARES ABOUT SAFETY.
• Minimum user age – 6 years.
• Only for domestic and outdoor use.
• Maximum user weight per swing station – 80 kg (175
lb) [65 kg (132 lb) on Spin Swing].
• Maximum combined user weight per swing set
section – 150 kg (330 lb).
• Adult assembly required.
• Adult supervision required at all times.
• Ensure that the Swing Set is secured with anchors or
bolts before use.
WARNING:
To reduce the risk of injury while using the system,
enforce the following:
Disclaimer
The following Conditions of Sale will apply to, and bind the
purchaser of, any Vuly USA Operations Corp (3666901) product.
NOTICE TO USER:
Please read this agreement carefully before purchase or
assembly. By purchasing, opening and assembling this
product you acknowledge that you have read this agreement,
understand it and agree to be bound by its conditions. If you
are making a purchase on behalf of another person, you
agree that you are making the purchase as their agent.
LEGAL RIGHTS – PLEASE READ:
EXCLUSION OF LIABILITY – WAIVER OF RIGHT TO SUE – YOUR
ASSUMPTION OF RISK – THESE CONDITIONS AFFECT YOUR
LEGAL RIGHTS.
Vuly USA Operations Corp. (3666901) (“Vuly”), as supplier of
trampolines and accessories (“Products”), sells all Products
subject to the following conditions:
1. To the maximum extent permitted by the law, Vuly, its
employees, directors and agents will not be liable to the
customer, their dependents or legal representatives for
damage to property, personal injury or death suffered by
the customer because the Product was not manufactured
or supplied with due care and skill, the Product is not
reasonably fit for its purpose or because of negligence,
breach of contract, breach of statute or breach of statutory
duty by Vuly.
2. Vuly, its employees, directors and agents are not liable to
the customer, their dependents or legal representatives
for personal injury or death suffered by the customer
because the Product was not:
a. installed in accordance with the Vuly instruction
manual. It is the customer’s responsibility to check all
boxes to confirm that all components are included
and in the correct condition before assembly.
b. installed with due care and skill, by a the customer or
a third party assembly service; and
c. in the same condition as when the Product was
supplied, due to wear and tear – including, but not
limited to, weather damage, deterioration of the net,
spring stretch, UV deterioration or rust.
3. The customer acknowledges that using the Product can
be dangerous, with inherent risks and hazards. As a
consequence, personal injury or death may occur. The
customer assumes and accepts all such risks, and hereby
– to the full extent permitted by law – waives the right of
action against, and fully releases Vuly for, loss, damages,
personal injury or death in any way caused by, or
relating to, the customer’s participation in such activities.
This includes – without limitation – liability for any negligent
or tortuous acts or omission, breach of duty, breach of
contract or breach of statutory duty on the part of Vuly, its
office bearers, directors, employees or agents.

4
2.0. Safety Information
2.1. Select Protective Surfacing
One of the most important things you can do to reduce the
likelihood of serious head injuries is to install shock-absorbing
protective surfacing under and around your play equipment.
The protective surfacing should be applied to a depth that is
suitable for the equipment height in accordance with ASTM
Specification F1292. There are different types of surfacing
to choose from; whichever product you select, follow these
guidelines:
2.1.1. Maintain a minimum depth of 9 in. (229 mm) of loose-fill
materials such as wood mulch/chips, engineered wood fiber
(EWF), or shredded/recycled rubber mulch for equipment up
Maximum Swing fall height: 2,226 mm (88 in.)
United States Consumer Product Safety Commission’s (USCPSC)
Outdoor Home Playground Safety Handbook. See below:
to 96 in. (2438 mm) high; and 9 in. (229 mm) of sand or pea
gravel for equipment up to 60 in. (1524 mm) high.
NOTE: An initial fill level of 12 in. (305 mm) will compress
to about a 9 in. (229 mm) depth of surfacing over time. The
surfacing will also compact, displace, and settle, and should
be periodically refilled to maintain at least a 9 in. (229 mm)
depth.
2.1.2. Use a minimum of 6 in. (152 mm) of protective surfacing
for play equipment less than 48 in. (1219 mm) in height. If
maintained properly, this should be adequate. (At depths
less than 6 in. (152 mm), the protective material is too easily
displaced or compacte
NOTE: Do not install home playground equipment over
concrete, asphalt, or any other hard surface. A fall onto a hard
surface can result in serious injury to the equipment user. Grass
and dirt are not considered protective surfacing because wear
and environmental factors can reduce their shock absorbing
effectiveness. Carpeting and thin mats are generally not
adequate protective surfacing. Ground level equipment – such
as a sandbox, activity wall, playhouse or other equipment that
has no elevated play surface – does not need any protective
surfacing.
2.1.3. Use containment, such as digging out around the
perimeter and/or lining the perimeter with landscape edging.
Don’t forget to account for water drainage.
2.1.3.1. Check and maintain the depth of the loose-fill
surfacing material. To maintain the right amount of loose-fill
materials, mark the correct level on play equipment support
posts. That way you can easily see when to replenish and/
or redistribute the surfacing.
2.1.3.2. Do not install loose fill surfacing over hard surfaces
such as concrete or asphalt.
2.2. Poured-In-Place Surfaces or Pre-Manufactured
Rubber Tiles
You may be interested in using surfacing other than loose-fill
○ Replace as needed.
At the end of each play session:
• Remove plastic and textile swings and store in a cool, dry
place.
• Rake and check depth of loose fill protective surfacing
materials to prevent compaction and to maintain
appropriate depth.
○ Replace as necessary.
Owners shall be responsible for maintaining the legibility of
the warning labels.
Disassemble and dispose of the equipment when it is no
longer safe to use. Ensure that no unreasonable hazards exist
at the time the equipment is discarded.
Save this instruction and information sheet for future reference,
in the event that the manufacturer has to be contacted.
1.0. Care and Maintenance
Improper maintenance or lack of care can lead to your swing
set deteriorating earlier than expected and causing injury.
Please follow these instructions to ensure that your swing set
lasts for as long as possible.
At the beginning of each play session:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges, and
corners.
○ Replace if they are loose, cracked, or missing.
• Check all moving parts – including swing seats, ropes,
cables, and chains for wear, rust, or other deterioration.
○ Replace as needed.
• Check metal parts for rust.
○ If found, sand and repaint using a non lead-based
paint meeting the requirements of 16 CFR 1303.
• Reinstall any plastic parts, such as swing seats or any
other items, that were removed.
• Rake and check depth of loose fill protective surfacing
materials to prevent compaction and to maintain
appropriate depth.
○ Replace as necessary.
Twice a month during play session:
• Tighten all hardware.
• Check all protective coverings on bolts, pipes, edges, and
corners.
○ Replace if they are loose, cracked, or missing.
• Rake and check depth of loose fill protective surfacing
materials to prevent compaction and to maintain
appropriate depth.
○ Replace as necessary.
Once a month during play session:
• Check all moving parts including swing seats, ropes,
cables, and chains for wear, rust, or other deterioration.

5
3.0. Operating Instructions
Observing the following statements and warnings reduces the
likelihood of serious or fatal injury:
• Number of occupants: One [1]
• Maximum weight of occupants: 80 kg (175 lb); 65 kg (132
lb) for Spin Swing.
• Recommend: Adult supervision for children of all ages.
• Warning: Instruct children not to walk close to, in front of,
behind, or between moving items.
• Warning: Instruct children not to twist swing chains or
ropes or loop them over the top support bar. This may
reduce the strength of the chain or rope.
• Warning: Instruct children to avoid swinging empty seats.
• Warning: Teach children to sit in the center of the swings,
with their full weight on the seats.
• Warning: Instruct children not to use the equipment in a
manner other than intended.
• Warning: Instruct children not to get off equipment while
it is in motion.
• Warning: Don’t allow children to wear inappropriate
items, such as – but not limited to – loose fitting clothing,
hood and neck drawstrings, scarves, cord-connected
items, capes and ponchos. These items can cause death
by strangulation.
• Warning: Instruct children not to climb when the
equipment is wet.
• Warning: Check the openings between rollers and sliding
surfaces of roller slides for foreign materials that could be
potentially hazardous to users.
• Warning: Verify that suspended climbing ropes, chain, or
cable are secured at both ends.
• Warning: Verify that suspended climbing ropes, chain, or
cable cannot be looped back on itself.
• Warning: Instruct children not to attach items to the
materials, like rubber tiles or poured-in-place surfaces.
2.2.1. Installations of these surfaces generally require a
professional and are not “do-it-yourself” projects.
2.2.2. Review surface specifications before purchasing this
type of surfacing. Ask the installer/manufacturer for a report
showing that the product has been tested to the following
safety standard: ASTM F1292 Standard Specification for
Impact Attenuation of Surfacing Materials within the Use Zone
of Playground Equipment. This report should show the specific
height for which the surface is intended to protect against
serious head injury. This height should be equal to or greater
than the fall height – vertical distance between a designated
play surface (elevated surface for standing, sitting, or climbing)
and the protective surfacing below – of your play equipment.
2.2.3. Check the protective surfacing frequently for wear.
2.3. Placement
Proper placement and maintenance of protective surfacing is
essential. Be sure to:
2.3.1. Extend surfacing at least 72 in. (1829 mm) from the
equipment in all directions.
2.3.2. For to-and-fro swings, extend protective surfacing in
front of and behind the swing to a distance equal to twice the
height of the top bar from which the swing is suspended.
2.3.3. For 360º swings, extend surfacing in a circle whose
radius is equal to the height of the suspending chain or rope,
plus 6 ft in all directions.
playground equipment that are not specifically designed
for use with the equipment, such as – but not limited to –
jump ropes, clothesline, pet leashes, cables and chain, as
they may cause a strangulation hazard.
• Warning: Instruct children to remove their bike or
other sports helmet before playing on the playground
equipment.
• Warning: Dress children with well-fitting and full foot-
enclosing footwear. Examples of inappropriate footwear
are clogs, flip flops, and sandals.
4.0. Pre-assembly
• Place the equipment on level ground and in a well-lit area,
no less than 1.8 m (6 ft) from any structure or obstruction
– such as a fence, garage, house, overhanging branches,
laundry lines, or electrical wires.
• Avoid installing over concrete, asphalt, packed earth,
grass, carpet, or any other hard surface. A fall onto a
hard surface can result in serious injury or death to the
equipment user.
• Ensure that your chosen surface allows the swing set to be
firmly embedded with the included Anchor Kit.
• Check that you have all parts required for assembly.
• Warning: Lock nuts and bolts securely.
• Warning: Children must not use the equipment until
properly installed.
4.1. Due Care when
Installing Product
• WARNING! Due care must be taken at all times whilst
installing your product.
• WARNING! Improper installation, adjustment or maintenance
can cause property damage, injury or death.
• Ensure you follow the steps in the manual at all times.

6
5.0. Parts And Components
SHADE
COVER
X 1
M8X40
X 6
L SHAPE
RAIL
X 1
CUBBY LINK
CUBBY
JOINER
X 1
CUBBY
RAIL
X 1
ANCHOR
X 6
END
JOINER
X 2
CUBBY
JOINER
X 1
L SHAPE
ADAPTOR
X 1
SHADE COVER
TUBE
X 1
L SHAPE

7
BASE RAIL
X 2
CUBBY
RAIL
X 1
M10X35
X 12
M8X35
X 4
SAND PIT
X 1
LED LIGHT
X 1
TOGGLE
X 7
TENT AND
MAT
X 1
STRAP
X 4
ALLAN
KEY
X 3
M8X40
X 28
END
JOINER
X 2
BASE
JOINER
X 4
PROTECTIVE
FOAM
X 4
CUBBY HOUSE
CLIMBING
NET
X 1

8
HIP
JOINER
X 2
MID
JOINER
X 2
MID TUBE
X 1
TUBE END
CAP
X 2
X2
H JOINER
X 1
LEG TUBE
X 2
SHOULDER
TUBE
X 2
BOX A

9
M8X40 X28
CUBBY HOUSE
1
6.0. Assembly Instructions
2
QTY
BOX A
X 2 X 2
CUBBY HOUSE

10
CUBBY HOUSE
X 1
CUBBY HOUSE
M8X40 X28
CUBBY HOUSE
2
2
1
NOTE: If you have purchased an L Shape Swing Set, install L Shape Adaptor in this step.

11
3BOX A
X 4
BOX A
X 4
M8X40 X28
CUBBY HOUSE
1
4
QTY
1
2

12
4

13
5
NOTE: If you have purchased an L Shape Swing Set, install L Shape Shade Cover Tube in this step.

14
1
2
6
M10X35 X12
CUBBY HOUSE

15
7BOX A
X 2
BOX A
X 2
4
2
QTY

16
8
2
QTY
X 2
CUBBY HOUSE
X 4
CUBBY HOUSE

17
X 4
CUBBY HOUSE
9
X 1
CUBBY HOUSE

18
BOX A
X 2
10
X 1
CUBBY HOUSE
2
1
3

19
11
M10X35 X12
CUBBY HOUSE
NOTE: Twist Mid Tubes to help getting Mid Joiners into hole.
Twist Middle Tubes with curve ends to align screw thread inside tubes.

20
12