Walker WPW19LDVD User manual

19”LCDTV+DVD
WPW19LDVD
OPERATING INSTRUCTIONS

-2-
Table of Contents
Specifications 9
Front Panel Buttons 11
Quick Connecting Guide 14
PC Connection 17
Remote Control Functions 10
Precautions and Reminders 6
Wall Mounting the Set 8
Important Safety Instructions 3
5
Conformity and Compliance
Quick TV Set-Up Guide 13
Rear Panel Inputs 12
Troubleshooting 32
Remote Control of TV and DVD 18
DVD Operation and Settings 26
24
DVD Hot Key
Teletext Instructions
25
MTS (stereo mode)
Manual Scan (manual tuning)
Auto Scan (tune automatically)
Set Channel (s kip)et channel s
Label (re-name Programs)
Channel List (sorting channel order)
Tracking (fine tuning)
TV System (to set your country)
Automatic Frequency Control
SYSTEM Menu 22
On Screen Display (OSD) Menu 19
Menu Display Settings 19
PC Menu 20
ADVANCE Menu 20
TV SETUP Menu 21
Audio Menu 22
TV Setting 23

-3-
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9. Iftheplugisnotsuitableordoesnotfitthesocketinyourhomeconsulta
qualified service agent.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Risk of electronic shock
Do not open
Caution
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the presence of uninsulated "dangerous voltage" within the product's
enclosure that may be of a sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Caution
This TV incorporates High-Definition
Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

-4-
Important Safety Instructions
。。
10. Protect the power cord from being walked on or pinched particularly at plugs,
AC power outlets, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15.Use this product within 5 C - 35 C , and relative humidity 20-80%.
16. Unit should not be exposed to liquids of any kind.
17. Always use the POWER BUTTONS on the
18. Contact service center if the picture displayed by the unit is getting dimmer.
19. do not place the unit on an uneven surface. Make sure it is at least 6 inches
from the wall.
20. Keep unit away from direct sunlight.
21. do not put heavy materials on top of the unit.
22. Do not place unit in confined spaces such as a book case.
23. plate is at the center of the back cover of the apparatus. It will
not be seen when the apparatus is on the wall.
24. Keep away from naked flames !
25. When using this product as a Computer monitor, health and safety experts
recommend short frequent breaks rather than occasional longer breaks.
Forexamplea5-10minute break after an hour of continuous use is likely to
be better than a 15 minute every 2 hours.
26. This product is designed for domestic use only and is therefore NOT suitable for
commercial use.
27. Do not expose this television to dripping or splashing or place any object filled
with liquids, such as vases on the television.
28. Do not use chemical solvents or strong detergents when cleaning this appliance
as these cleaners may damage the cabinet.
TV when leaving unattended for
alongperiodEGHoliday.
The rating
mounted

ELECTRICAL CONNECTION
For your safety please read the following information.
The appliance must be connected to a 220-240 volts 50 cycle AC supply by
means of a three pin socket, suitably earthed and should be protected by a
3 Amp fuse in the plug or a 3 Amp fuse in the consumer unit.
Never use a fused mains plug without the fuse cover.
Never put a naked flame source near or on the television.
If the mains plug is unsuitable for the socket outlet in your home or is removed
for any other reason, then the plug should be disposed of SAFELY to prevent the
hazard of electric shock.
If a fuse is fitted to the plug, remove the fuse before throwing the plug away.
The appliance is supplied with a BS1363 plug fitted with a 3 Amp fuse.
should the fuse require replacement, it must be replaced with a fuse
rated at 3 Amp and approved to BS1362.
Important
The wire in the mains lead on this appliance are coloured in accordance with
the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
As the colours may not correspond with the markings identifying the terminals
in your plug, proceed as follows.
The green and yellow wire must be connected to the terminal in the plug which
is marked with the letter E or with the earth symbol or coloured green and
yellow.
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.
Warning:
This appliance must be earthed by connecting to a mains power outlet with
a protective earthing connection.
How to wire a UK mains plug.
-5-
Conformity and Compliance
E
N
L
GREEN/YELLOW
Earth
BROWN
Live
FUSE
3Amps
Cord Clamp
BLUE
Neutral

-6-
Precautions And Reminders
Place unit on even surfaces. Do not place the TV in confined
spaces or in a box when using it.
6 inches
Do not any object inside
the TV box such as metals or
flammable materials.
Insert
Do not open the TV cabinet.
Unplug immediately if there is
malfunction such as no picture, no
video/audio, smoke, bad odor
from TV.

PIP
TXT
iX
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE
PIP
TXT
iX
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE
-7-
Precautions And Reminders
Make sure to unplug the unit when
not in use for a long period of time (days).
Avoid direct sunlight, dusty, high
humidity and smoky areas.
Remember to unplug the power cord from
the power outlet before cleaning the
display unit. Only use recommended
cleaners do not allow water to remain on
the screen as it could cause permanent
damage.Only use a lightly dampened
cloth to clean the LCD screen.
Do not cover or block any vents and
openings. Inadequate ventilation may
shorten the life of the display unit
cause overheating.
or
Always remember to protect the screen
from finger prints.
Do not use chemical solvents.
Notice for Remote Controller
Avoid Dropping Avoid Liquids Avoid Aerosol Cleaners
PIP
TXT
iX
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE

-8-
Wall Mounting the Set
The wall mount set (Optional)
Caution:
Contact a professional installer if you are unsure about wall mount installation.
Improper installation may cause injury and damage display unit.
When removing the TV stand, place the display panel face down on a
soft fabric to avoid damaging the unit.
to the
This product requires a 100mm VESA wall mounting kit to mount it
on a wall (not supplied).
Please mount this product solidly on the wall or pole.
Wall Mount Procedures
1. Loosen screws on base stand.
2. Loosen screws on neck of base stand.
3. Detach TV from the neck of base stand.
4. Wall mount the set.
Warning:
To prevent injury, this apparatus must be securely
attached to the wall in accordance with the installation
instructions supplied with the mounting kit.
The holes for VESA plate mounting
(Total 4 holes)
1
2
3
4
1-2
1-1

-9-
Specifications
19"
16:9
1440 x 900
300 nits
700:1
150/135
5ms
PAL,SECAM
B/G,D/K,I,L/L'
48.25MHz~863.25MHz
PAL,SECAM
TOP/FLOF
A2(B/G,D/K)/NICAM(B/G,D/K,I,L/L')
Yes
Video, SCART, Tuner, Line, HDMI, DVI
2x3W
1
2
1
1
1
1
1
1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
70W
650mm x 408mm x 220mm
8.6kg
WPW19LDVD
Composite, Y-C, RF,
YPbPr / HDMI(576p/720p/1080i)
1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
2.5A, 50-60Hz
7.5A, 90W
Remote control unit , adapter, power cord, user manual, battery
Panel Size
Aspect Ratio
Resolution
Brightness
Contrast Ratio
Viewing Angle (H/V)
Response Time(Tr+Tf)
RF system
Broadcasting System
Channel Coverage
Type
Teletext
Signals Supported
Stereo System
Volume/Bass/Treble/Mute control
Audio Input
Speaker Output
RF-IN
SCART-IN
Component(YPbPr)-IN
AV -IN Video (AV or S-Video in)
HDMI IN
PC - D-Sub IN
Line - IN(for PC)
Audio in (for DVI)
Headphone in
ATS(Auto tunning system)
Sound Auto Detect Display
Auto Adjust(PC mode)
Channel Editing
Channel Up
Channel Down
Volume Up
Volume Down
Menu
Source
Power
WxHxD
EJECT
FR
FF
STOP
PLAY/PAUSE
Slot-in
TV/DVD
AC INPUT (100~240V)
DC OUTPUT (12~17V)
Model No.
User key(DVD)
IR control
DVD
Panel
TV function
Video System
VBI support
Video Feature
Audio Feature
I/O Connection
User Feature
User key(TV)
Power consumption
Dimensions
Weight(net)
Accessories
Power Supply
(EDAC EA11003A)

-10-
Remote Control Functions
Putting the batteries in the remote
lOpen the battery compartment cover and
insert the batteries as shown.
Use two AAA/R03 batteries and
follow the indications ( , )
inside the compartment.
Close the cover when you're finished.
l
l
12
Key(s)
POWER
DVD Indicator
AV
TV/DVD
EJECT
Number (0-9)
EPG /
DISPLAY
PBC
SUB TITLE
PIP AUDIO /
AUDIO
MUTE
SLEEP
Cursor keys( )
(CH+, CH-)
(VOL+, VOL-)
MENU /
ENTER
ALTERNATE /
VIRTUAL
I-II /
A-B
STOP
PLAY / PAUSE
DVD MENU
PREV-NEXT
REW -FWD
PIP /
DVD SETUP
SWAP /
REPEAT
POSITION /
TITLE
PIP SIZE /
ANGLE
STATUS
SIZE
PICTURE
FREEZE
RANDOM
INFO
T.T Display
T.T Hold
T.T Reveal
T.T S iz e
T.T Index
T.T Cancel
T.T M ix
T.T Subcode
RED, GREEN,
YELLOW, BLUE.
Functionality
EPG:
DISPLAY:
PIP AUDIO:
AUDIO:
MENU:
ENTER:
ALTERNATE:
VIRTUAL:
I-II:
A-B:
PIP DISPLAY:
DVD SETUP:
PIP SWAP:
REPEAT:
PIP POSITION:
TITLE:
PIP SIZE:
ANGLE:
Turn the TV on and off.
In the DVD mode, the LED will be lit.
Use to select an input source. ( see page 14 )
Press to switch remote control inputs between TV or DVD mode.
Open and close the disc tray.
Use number (0-9) buttons to create stations and preset programs.
Press to display the on-screen Electronic Program Guide (EPG).
Display disc information.
VCD 2.0 playback PBC functions on/off.
Displays or change the subtitle language.
Press to selects PIP (sub picture) audio in PIP mode.
When plaing a DVD / Video disc recorded with dialog in two or
more languages, you can switch audio language during playback.
Press to temporarily cut off the sound.
Performs the sleep timer function.
To move the cursor up/down/right/left to scroll through a list of options.
Cycle through available channels in either Up/down sequence.
Press to increase or decrease the volume.
Displays the main on-screen menu.
Press to select options in DVD disc menu.
Return to the previous channel.
In DVD mode pressing the play button shows an on screen
remote control. ( see page19 )
Selecting the sound mode. ( see page18 )
In DVD mode, The A-B Repeat function allows you to specify two
points (A and B) within a track or title that forms a loop which is played
over and over.
Stop playback.
Disc play/pause.
When playing a disc, displays the disc's menu.
Search forward/backward through the disc.
Press to increase/decrease or menu control key
Also advances to the next/preceding chapter or track.
Press to activate Picture In Picture (PIP) mode.
Press again to select the sub picture signal source.
Display the DVD OSD menu.
Press to switch between main picture and sub picture
in PIP mode.
There are various repeat play options, depending on the kind
of disc being loaded. It's also possible to use repeat play along with
program play to repeat the tracks/ chapters in the program list.
Press to select the position of the sub picture in PIP mode.
Accesses the DVD disc guide.
Press to change the size of sub picture in PIP mode.
The scene change to the selected angle.
Press to display the current channel and audio/video settings.
-FULL (full screen)............standard full-screen text.
-TOP (top half)..................top half of page appears on the full screen.
-BOTTOM (bottom half)... Bottom half of page appears on the full screen.
Press to select advanced picture setting.
You can select from five different modes: User/Sport/Movie/Vivid/Game
Press to freeze the picture and press again to restore live viewing.
In DVD mode, Use the random play function to play titles or chapters,
groups, or tracks.
Various track, chapter and title information, such as the time elapsed and
remaining playing time can be displayed on-screen while the disc is playing.
Press to access Teletext function.
Stop from advancing to the next Teletext sub Page.
Show hidden information. Press again to conceal the information.
Change the size of Teletext.
Access the Teletext index.
Exit Teletext mode.
To overlay text onto a TV programmer
Select a Teletext subtitle page, then enter desired page number to begin
page search.
Direct access Teletext linked page key
i
X
?
PIP
TXT
iX
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE

-11-
Front Panel
Function Keys
2
1
Front Panel Buttons
3 4 5 6 7 8 9 10 11 12
1
2
3
4
5
6
Power indicator:
IR Receiver:
Channels / Cursor Up/Down keys:
Menu key:
Source key:
Stand by mode displays amber. Power on
displays green.
Aim at the IR receiver window when using
Remote Controls.
Press - to select channels from high to low,
and press + to select channels from low to high.
When OSD menu displays, these two keys
enable selection of menu items.
Press to display the Menu. Press again to
exit the Menu.
Press this button to cycle through:
TV DVD VIDEO SCART1/2(Video/RGB) YPbPr (Component) VGA(PC)
HDMI.
Volume Control / Setting keys:
Press - to decrease volume, and press +
to increase volume. When OSD menu displays,
these two keys enable change of setting levels.
(S-Video/ Video)ªª ª ª ª ª
Press once to turn on. Press again to return to
stand by mode.
Disc play/pause and enter key.
Opens and closes the disc tray.
Press to stop DVD playback.
Press to search forward through the DVD.
Press to search backward through the DVD.
Power key:
Play/Pause key:
Eject key:
Stop key:
FF key:
FR key:
7
8
9
10
11
12

RLVideo
Phone S-Video Power
-12-
Rear Panel Inputs
Rear Panel
Audio in
Pr
Pb
Y
RL L
R HDMI
VGA
SCART 2SCART 1 Antenna
Antenna Input Socket
Y Pb Pr Input Socket
AV (Video / L / R) Input Socket
S-VIDEO Input Socket
Input Socket
VGA Input Socket
PC Audio Input Socket
Power
:
:
:
:
:
Socket 1 : Support SCART CVBS+RGB
:
:
appliances with HDMI output.
If the signal source use DVI format,
then connect appliances with PC output.
For earphones.
75 type coaxial cable connector.
Connect appliances with component output.
Connect with DVD player or VCR AV output.
Connect appliances with S-VIDEO output.
Connect DVD pla
Connect with VGA socket of PC.
Connect with Line Out socket of PC.
: Input socket connect with AC power cord.
Ω
SCART 1 / 2
HDMI Input Socket:
HDMIL/R:
Phone:
yer or VCR AV output.
Connect
Socket 2 : Support SCART CVBS

-13-
Quick TV Set-Up Guide
1. If power input is connected correctly, the LED on the front panel becomes
(i.e. stand-by mode). Press the POWER button on the function panel OR press
the red POWER button “ ” of the remote control. The TV will switch on and the
LED on the front panel becomes green.
2. To switch the TV off, press the POWER button on the function panel OR press the
red POWER button “ ” of the remote control. The TV will switch off and go to the
stand-by mode.
Amber
Turning ON/OFF the TV
PIP
TXT
iX
?
DVD
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE
Auto Scan channels
If you would like the channels on certain numbers please refer to 'Manual scan'
on page 24, or channel swap on page 22.
1. Press the AV key repeatedly to change the input source to TV.
2. Press the MENU/ENTER key on the remote control to show the On
Screen Menu (OSD).
3. Select TV setup with the up / down arrow buttons, then Press Left / Right
arrow buttons to select Auto Search. Then press left arrow again and
"country" will be highlighted. Use the left / right arrow buttons to select
your country. This will only need setting the first time the TV is tuned.
4. When the auto scan has finished Press the MENU/ENTER button to leave the Setup stage.
Press the up / down buttons to highlight "Start Search", then press the
right arrow button to start searching for channels.
3
1
Cursor
keys
2
4
1. Connect adapter to power input of TV.
2. Connect adapter to power cord.
3. Connect the other end of power cord to power supply.
Power connection
POWER
CONNECTING A TV ANTENNA / CABLE
To view television channels correctly,
a signal must be received from one of the following sources:
1. An indoor or outdoor aerial
2. A cable television set top box
Insert the aerial plug into the aerial input socket on the left side of the television.
Note: For receiving over-the-air TV broadcasts, we recommend you use an external
fixed aerial.
If you have to use a set top aerial, please ensure that you use one with sufficient gain to
receive in weak signal areas. Only when you are in close proximity to a transmitter will an
indoor aerial produce a picture as clear as a fixed antenna.
Connecting to An Aerial
75

-14-
Quick Connecting Guide
●
This product includes SCART, AV, S-VIDEO, input
sockets to connect with DVD player, VCR, DV Camera to obtain
better picture quality.
Input jacks and source selection need to match correctly for display
of correct picture.
Video and Audio jacks are colour-coded:
YPbPr
●
●
Video........................................... Yellow (Y)
Audio (L)..................................... White (W)
Audio (R)..................................... Red (R)
Y.................................................. Green
Pb................................................ Blue
Pr................................................. Red
Audio (L)..................................... White (W)
Audio (R)..................................... Red (R)
Connection Instruction
1. Connect home entertainment appliance with appropriate SCART / AV/SVIDEO
/ YPbPr / PC input / HDMI jacks.
2. Press
to select :
TV DVD VIDEO (S-Video/ Video) SCART 1 /2 (Video/RGB) YPbPr (Component) VGA(PC) HDMI.ªª ª ª ª ª
AV key on the remote or the SOURCE button
on the TV one of the following

Using VIDEO or VIDEO for DVD Player / VCRS-
RL
Video
Phone S-Video Power
RL
RL
S
S
V
V
ON
MIC1 MIC2
OPEN/CLOSE
DIGITALOUT
DVD / SVCD / VCD / CD / MP3 PLAYER
++
VOL.1 VOL.2
POWER
OFF
REW FWD
PLAY STOP PAUSE
TAXT
SOUND
Please refer to DVD player or
VCR manual for
instructions.
more detailed
connecting
NOTICE
Antenna Socket
ON
MIC1 MIC2
OPEN/CLOSE
DIGITALOUT
DVD / SVCD / VCD / CD / MP3 PLAYER
++
VOL.1 VOL.2
POWER
OFF
REW FWD
PLAY STOP PAUSE
TAXT
SOUND
Quick Connecting Guide
-15-
Using SCART Input for DVD Player/ VCR
SCART 2SCART 1 Antenna
ON
MIC1 MIC2
OPEN/CLOSE
DIGITALOUT
DVD / SVCD / VCD / CD / MP3 PLAYER
++
VOL.1 VOL.2
POWER
POWER
OFF
REW FWD
PLAY STOP PAUSE
TAXT
SOUND
or
AC adapter
To DC INPUT
terminal
Plug into
an AC outlet
Household
power outlet
AC cord:
product shape
may very from
country to country.

-16-
Quick Connecting Guide
UsingHDMIforDVDPlayer/VCR/PC
Using YPbPr for DVD Player / VCR
Audio in
Pr
Pb
Y
RL L
R HDMI
VGA
ON
MIC1 MIC2
OPEN/CLOSE
DIGITALOUT
DVD / SVCD / VCD / CD / MP3 PLAYER
++
VOL.1 VOL.2
POWER
OFF
REW FWD
PLAY STOP PAUSE
TAXT
SOUND
OPTION 1
OPTION 2
RL
R
L
HDMI CABLE
DVI
Audio in
Pr
Pb
Y
RL L
R HDMI
VGA
ON
MIC1 MIC2
OPEN/CLOSE
DIGITALOUT
DVD / SVCD / VCD / CD / MP3 PLAYER
++
VOL.1 VOL.2
POWER
OFF
REW FWD
PLAY STOP PAUSE
TAXT
SOUND
(Red)
(Blue)
(Green)
(Red)(White)

Audio in
Pr
Pb
Y
RL L
R HDMI
VGA
-17-
PC Connection
Connecting PC Instructions
1. Video Signal Connection:
Connect VGA signal cable to VGA input and VGA output of the
computer.
2. Audio Signal Connection:
Connect audio signal cable to AUDIO IN and LINE OUT jack of the
computer
socket of the TV
jack on the TV
sound card.
VGA PORT
PC AUDIO OUT
Operating Instructions
1. Turn on the TV with the power switch.
2. Press the AV button on the remote twice to
select PC mode.
3. Turn on computer, and the PC Desktop will be
displayed.
When the user switches
resolution which is not listed , screen
will display
Please wait for ,
will return back previous
resolution.
OUTOFRANGE.
thePCtoa
the
the message
the
computer to the
“”
10 to 15 seconds
MODE Resolution Refresh Rate
XGA
1024X768
1024X768
1024X768
SXGA
1280X1024
Supported Resolutions
SVGA
VGA
800X600
800X600
640X480
640X480
75
75
75
60
60
60
60
70

-18-
Remote Control of TV and DVD
The remote control has two modes of operation, one for TV and one for DVD. Switching between the
two modes is achieved by using the TV / DVD button on the remote control.
The TV / DVD button works like a toggle switch. One press switches the remote to DVD mode and the
second press switches the remote back to TV mode.
An indicator appears in the top left hand corner of the TV screen to tell you what mode the remote is
in. If the wrong indicator appears, just press the TV / DVD button again.
To see the DVD picture, press the TV / DVD button until the "DVD” indicator lamp is off, then press the
AV button once. After a short pause, the DVD picture will appear. To operate the DVD player you
must put the remote into DVD mode. To do this, press the TV / DVD button until the “DVD" indicator
lamp is on.
For DVD operation see page 25 and for TV operation see page 20.
Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual
FM
Stereo
Behavior
MONO
STEREO MONO
DUAL 1 DUAL 2
MONO STEREO
MONO DUAL 1 DUAL 2
1
"
1
1
1
1
MONO MONO
NICAM
Stereo
You can set the sound mode
by pressing the .
When you press it, the current sound
mode is displayed on the screen.
“I-II” button
PIP
MUTE
ALTERNATE/
VIRTUAL
SLEEP
TITLE
PICTURESIZE
Select the sound mode
PIP AUDIO
PIP Function (Picture in picture)
Main signal
Sub signal
Key(s)
PIP
SWAP
POSITION
PIP SIZE
PIP AUDIO
Functionality
PIP DISPLAY:
PIP SWAP:
PIP POSITION:
PIP SIZE:
PIP AUDIO:
Press to activate Picture In Picture (PIP) mode.
Press again to select the sub picture signal source.
Press to switch between main picture and sub picture in PIP mode.
Press to select the position of the sub picture in PIP mode.
Press to change the size of sub picture in PIP mode.
Press to selects PIP (sub picture) audio in PIP mode.
TV DVD VIDEO SCART
1/2 YPbPr VGA HDMI
Main signal
Sub signal
TV
DVD
VIDEO
SCART 1/2
YPbPr
VGA
HDMI
The sub-signal options change as the main signal source changes.

-19-
OSD Settings: Menu
1. Press the MENU button on the remote control to display the main menu.
2. Press the buttons to highlight the menu entries.
3. Press the button to enter the submenu.
4. Press the buttons to highlight the item to be adjusted.
5. Press the button to confirm your choice.
6. Press button to adjust the setting.
7. Press the MENU button again to quit the picture.
NOTE: Items in gray cannot be selected and adjusted.
Using the on screen display (OSD):
pq
u
pq
u
tu
DISPLAY
Contrast
Brightness
Sharpness
Saturation
Color Temperature
Tint
Focus
Recall
MENU
: SELECT
: EXIT
: ENTER
DISPLAY (for TV/DVD/VIDEO/SCART-1/SCART-2/YPbPr/HDMI)
Menu
Contrast
Brightness
Sharpness
Saturation
Color Temperature
Tint
Focus
Recall
Descriptions
To adjust the difference between the lightest and darkest areas of the
LCD display screen. Contrast should be adjusted in conjunction
with the brightness setting.
To adjust the light level of the LCD display's screen. It should be
adjusted in conjunction with the contrast setting.
To adjust the sharpness of the image.
To adjust the color density/lightness.
To characterise the spectral properties of a light source.
Low color temperature implies warmer (more yellow/red) light,
While high color temperature implies a colder (more blue) light.
To adjust the picture tone.(NTSC only)
To adjust the phase.(YPbPr only)
To reset all Display function settings to their factory-set default values.

-20-
OSD Settings: PC/ADVANCE
PC
AUTO ADJUST
WHITE BALANCE
CONTRAST
BRIGHTNESS
CLOCK
COLOR TEMPERATURE
RECALL
MENU
: SELECT
: EXIT
: ENTER
PC (for VGA)
Menu
Auto Adjust
White Balance
Contrast
Brightness
Clock
Phase
Color Temperature
Recall
Descriptions
To allow the monitor to determine and select the horizontal and
vertical adjustment, and clock and phase settings that are most
appropriate for your system requirements.
To return the display's brightness and contrast to the default settings.
To adjust the difference between the lightest and darkest areas of
the LCD display screen. Contrast should be adjusted in conjunction
with the brightness item.
To adjust the light level of the LCD display's screen. It should be
adjusted in conjunction with the contrast setting.
To adjust pixel alignment to help stabilize the VGA display.
To adjust the focus and clarity of the VGA display.
To characterize the spectral properties of a light source.
Low color temperature implies warmer (more yellow/red) light,
While high color temperature implies a colder (more blue) light.
To reset all Display function settings to their factory-set default values.
ADVANCE
NDR
LTI
DCI
Recall
MENU
: SELECT
: EXIT
: ENTER
ADVANCE (for TV/DVD/VIDEO/SCART-1/ SCART-2/YPbPr/VGA/HDMI)
Descriptions
To adjust noise reduction level (YPbPr, VGA, HDMI no support)
To adjust the H/V Luminance Transient Improvement function
To adjust dynamic color adoption (VGA no support)
To return all advance function settings to their factory-set default values.
Menu
NDR
LTI
DCI
Recall
These values are set to personal preference, you need to experiment to find your preferred settings.