2)After2 minutes,thecamerawill stoprecordingautomaticallyandsavethevideo,
then continuerecording
3)When SDcardis full,camerawill deletethefirst videofootageautomaticallyand
continuerecording
4)At anytimeduringrecording,you canpress therecordbuttontostop and savethe
video.Theremainingtimewill displayontheLCD screen atthetop right.
**Note If youpoweroff thecamerawhilethecamerais set to looprecording,
when youpowerthecameraon again orconnect charger,thecamerawill remain in
loopingmode.
**Note Looprecording, Time-lapsevideo,motiondetection,onlyonefunctioncan
beworkatthesametime.
Time-lapse Recording
Turn onthecamera, pressthemenubutton andusetherightarrowto choose
“Time-lapseRecord”to1second(formore optionsrefertoVideo Settings),press
theRECbutton oncetotakevideo,press theRECbuttonagainto stop.
Whenplayback,Thevideo will playbackquickly(playfasterthannormal speed).This
recordingfunctionforprocess ofarchitecturalprojects, weatherchanging, flowers
blooming.
To return tonormalvideo,press theRECbutton again to stoprecording.And choose
“Time-lapseRecord”tooff.
** Note: Thisfeature onlysuitforalongtimerecording,example:ifsetthe “Lapse
record”to1 second,therecordingtimeshouldnot beless than1 minute.
Also this settingwill not workif theLoopRecordingis notturned off.
Motion Detection
1)Press menuand useright arrowtochooseMotionDetectionand choose30SEC
forexample(formoreoptionsreferto Video Settings),press RECtoenterMotion
Detectionmode.Thescreen will sayMotionDetecting,andautorecordfor30sec.
2)If thereis movement,thecamerawill autorecordfor30sec(orthetimeyou set)
and stop.Ifthere is no movement,thecamerawill stop recordingautomatically.If
thereisconstant movement,thecamerawill detect this andthecamerawill keep
recordingat30secintervals orthetimeyouhaveset.
** Note –If youneedto pauserecording,press therecordbutton onceto stopit.If
you needto cancelmotiondetection –pleaseturn offthissettinginthemenu.Also
this settingwill not work if theLooprecordingis not turnedoff.
Imagerotation
Dependingontheneed,underthesystemmenu"ImageRotation"Select"Open"and
press “OK”buttontoconfirm, thescreen will showinverted images.Thismaybe
necessaryifyouare mountingthecameraupsidedown.
