Wasserstein WTag User manual
WTag
USER MANUAL
Find lost items effortlessly with WTag
Works with
Apple Find My
Locate Your Item
The Apple® Find My® network provides an easy, secure way
to locate compatible personal items on a map using the Find
My app on your iPhone®, iPad®, or Mac®. Simply pair your
compatible product with the Apple Find My app to view it right
alongside your Apple devices. If your item ever goes missing,
you can put it in Lost Mode to display a message and contact
information to anyone who might find it. The Find My network is
encrypted and anonymous, so no one else, not even Apple or
the maker of your personal item, can view its location.
page 1
page 2
Product Description
1. Power on
Click the button (long beep)
2. Power off
Hold the button for 3 seconds (beep twice)
3. Play Sound
Press “Play Sound” in Find My app (beep 13 times)
4. Remove Item
Press “Remove Item” in Find My app (long beep)
5. Reset
Click the button 5 times and hold it until there is a long
beep (Need to remove WTag from Find My app before
reset it)
Battery
The WTag necessitates the use of a CR2032 battery, which
might require replacement over the course of its lifespan. When
replacing the battery, ensure that only the same type and rating
of battery with the correct polarity are used.
Replacing the battery
1. Open the back cover through the gap between the top and
bottom cover.
2. Remove the existing battery.
3. Insert the CR2032 battery into the device with the positive (+)
side facing up
4. Assemble the top and bottom cover and press tightly.
CR2032
page 3
Start Guide
1. Power On / Off
Press the center button to activate WTag
2. Add Your WTag
• Open the “Find My” app, select the “Items” tab and tap on
the “Add Item” icon.
• Choose “Other Supported Item” then tap “Connect” once
WTag is recognized.
• Enter a name for your device and choose an emoji to
represent it, then tap “continue”.
• Confirm your Apple ID. Tap “agree” and “finish” to proceed.
• Congratulations! Your WTag has been successfully set up and
is ready to use
3. Find Your WTag
• Open the “Find My” app, select the “Items” tab and choose
the item you are looking for.
• Tap on “Play Sound” to enable the beeping sound on your
WTag,.
• Once you have located your WTag, tap on “Stop Sound” to
stop the beeping.
page 4
• (Alternatively, if you have an Apple Watch®, you can also
use the Find Items app on your Apple Watch® to locate your
WTag.)
4. Locate Your WTag
• Open the “Find My” app, select the “Items” tab and choose
the item you are looking for.
• The location of your WTag will appear on the map along with
a timestamp indicating when the item was last located.
• Tap “Direction” to navigate to your lost item’s location.
• (Alternatively, if you have an Apple Watch, you can also
use the Find Items app on your Apple Watch to locate your
WTag.)
5. Enable Lost Mode
• Open the “Find My” app, select the “Items” tab and choose
the item you are looking for.
• Scroll down and tap the “Lost Mode” section.
• NOTE: When Lost Mode is enabled, the “Notify When Found”
feature will automatically be enabled as well. Additionally,
your WTag will not be able to pair with a new iOS® device
while Lost Mode is active.
• (Alternatively, if you have an Apple Watch, you can also use
the Find Items app on your watch to enable Lost Mode for
your WTag). page 5
page 6
Factory Reset
• Open the Find My app and navigate to the “Items” tab.
• Select the relevant item and ensure that the “Lost Mode” is
disabled.
• Scroll down to the bottom of the screen and tap on “Remove
Item.”
• A pop-up window will appear. Confirm the removal by
tapping on “Remove.”
• Once the WTag has been successfully removed from the Find
My app, proceed to the next step.
• Press the on / off button five times and hold it until you hear
a beep sound.
• The WTag has now been reset and is ready to be paired with
a new iOS device.
Safety Information
Please be advised that proper handling and care of the WTag
is of utmost importance. It incorporates delicate electronic
components, including batteries, and mishandling may result
in damage, functional impairment, or potential injury. To
ensure longevity and optimal performance, it is crucial to avoid
dropping, burning, puncturing, crushing, disassembling, or
exposing it to excessive heat, liquids, or environments with
high concentrations of industrial chemicals. Furthermore,
it is imperative not to utilize a damaged WTag under any
circumstances.
Specications
Model: WTag
Material: ABS
Dimensions: Dia 1.6”
Weight: 9 g (0.3 oz)
Battery Type: CR2032 (included)
Battery Life: > 1 year (Note: this is an estimate on typical
usage and may not reflect your actual usage)
Connectivity: Bluetooth
Compatibility: iPhone 6s above; iOS®14.5 or above page 7
Notice
Use of the Works with Apple badge means that a product has
been designed to work
specifically with the technology identified in the badge and
has been certified by the product manufacturer to meet Apple
Find My network specifications and requirements. Apple is
not responsible for the operation of this device or use of this
product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad,
iPadOS®, Mac, macOS® and watchOS® are trademarks of
Apple Inc., registered in the U.S. and other countries. iOS is
a trademark or registered trademark of Cisco in the U.S. and
other countries and is used under license
Model: WTag
Material: ABS
Dimensions: Dia 1.6”
Weight: 9 g (0.3 oz)
Battery Type: CR2032 (included)
Battery Life: > 1 year (Note: this is an estimate on typical
usage and may not reflect your actual usage)
Connectivity: Bluetooth
Compatibility: iPhone 6s above; iOS®14.5 or above page 8
Get More Support
Scan the QR code below or email us at
Wasserstein is not affiliated with Apple, Inc.
Wasserstein is a trademark of Dropcases Ltd. Made in China
www.wasserstein-home.com
Table of contents
