Watermark Two Valve Roman Tub User manual

Two/ Three Valve Roman Tub Set (Deck Mount)
Installation Instructions
Two Valve/Three Valve Roman Tub Set [Rev. 3.0] Page 1
GENERAL INSTRUCTIONS:
 ALWAYS flush lines of debris; Always provide an access panel for later service.
 USE TEFLON TAPE OR PIPE SEALANT FOR THREADED CONNECTIONS
 DO NOT USE PLUMBER’S PUTTY ON ANY OF THE BRASS COMPONENTS
 This will cause the finish to tarnish and void the warranty. A non-corrosive
Alkoxy Silicone is recommended.
 DURING SWEATING OF LINES DO NOT OVERHEAT CASTING
 Overheating may cause damage to internal mechanism
 COPPER ADAPTORS MAY BE REQUIRED TO COMPLETE YOUR INSTALLATION
 Stem protrusion varies between different handles, see the diagrams below for
reference.
NOTE: These instructions do not represent step-by-step directions. They are a product
supplement only to be used by a qualified/ licensed plumber. We recommend all plumbing
fixtures be installed by a professional.
For support please call (718)-257-2800 or visit www.watermark-designs.com
CLASS I: Escutcheon/escutcheon ring threaded but not big enough to fit another lock nut.
Stem protrusion from the deck is generally between 1”-2”
CLASS 2: Escutcheon big enough to fit another lock nut. Stem protrusion from the deck is
generally over 2”.
CLASS 3: Handle uses its own lock nut in conjunction to the lock nut included with the valve. A
plastic collar is provided with the handle as well. Stem protrusion from the deck is under 1”
HANDLE CLASSES QUICK GUIDE
CLASS I
B9M R2 H4
BK S1 BG4
CL14 S2 BG5
CL15 SP4 TIA
CL16 SP5 TIB
EV4 SWA DD2
J5 TR24 DD3
J6 TR25 S1A
Y2 V SWA
L8 L9
CLASS II
AA T6 T
AX TR14 X
BB TR15 Y
CC U SWU
CRY4 WW SU
CRY5 XX IN14
DD YY IN16
SW Y2
CLASS III
BL1 E1
BL2 E2
BL3 ZEN
ED1 MZ4
ED2 MZ5
ED3
ED4

Two/ Three Valve Roman Tub Set (Deck Mount)
Installation Instructions
Two Valve/Three Valve Roman Tub Set [Rev. 3.0] Page 2
Two Valve Roman Tub
Three Valve Roman Tub
PARTS LISTS FOR ROMAN TUB SETS:
 The basic Roman tub set should include the items in the below diagram.
 Carefully remove all parts from the box.
ITEM
NO. PART NUMBER QTY.
1 DECK SPOUT 1
2 #10-24 SOCKET; CUP POINT;
1/2’’ LENGTH 1
3 22-8 NIPPLE 1
4 22-8 LOCK NUT 1
5 508-TEE 1
6 508 VALVE BRASS LOCK NUT 2
7 CRT-508 2
8 SS-508 VALVE BODY 2
ITEM NO. PART NUMBER QTY.
1 DECK SPOUT 1
2 #10-24 SOCKET; CUP POINT; 1/2’’ LENGTH 1
3 HAND SHOWER 1
4 DECK ELBOW ASSY 1
5 DM-3079 1
6 DECK BASE 1
7 DECK BASE LOCK NUT 1
8 RUBBER WASHER 2
9 SS-508 VALVE WASHER 1
10 SS-DD4 VALVE BODY 1
11 CRT-DD4 1
12 SS-DD4 NIPPLE EXTENSION 1
13 22-8 LOCK NUT 1
14 22-8 NIPPLE 1
15 SS-508 VALVE BODY 2
16 CRT-508 2
17 SS-508 BRASS LOCK NUT 2

Two/ Three Valve Roman Tub Set (Deck Mount)
Installation Instructions
Two Valve/Three Valve Roman Tub Set [Rev. 3.0] Page 3
INSTALLATION DIAGRAMS FOR 2 VALVE AND 3 VALVE ROMAN TUB SETS
NOTES:
 The valves shown in the diagram are laid out to represent the installation of a CLASS III handle trim
 Rough in hole sizes are 1 3/8” for all roman tub valves
 Hard piping is required with roman tub sets