Columbia Products Sani-Lav S800A User manual

1
WALL MOUNTED SINKS
Columbia does not recommend use with harsh chemicals.
NSF/ANSI Standard 2 - Food Equipment and NSF/ANSI 372 low-lead.
Operating Manual for Hands-Free Wall Mounted Surgeons Sink
Models S800A and S800B

Illustration A
Illustration B
2
COLUMBIA SPECIFICATIONS
1622 Browning Irvine, CA 92606-4809 Phone: [phone] Toll Free: 800.626.2117 Fax: [phone] www.columbiasinks.com email: [e-mail]
©2018 Columbia Products
WALL MOUNTED SINKS
Tools Required
Tape Measure
Adjustable Wrench
Drill Motor and Drill Bits
Pipe Wrench
Level
Safety Glasses
Screw Drivers: 1 Phillips & 1 Standard
Pencil
Socket Wrench
Installation Instructions
Step 1
1. Establish sink location on the wall.
2. Determine desired height for the top of the backsplash from finished floor and draw a level
line which will be the top edge of the wall mounting bracket.
3. Hold the wall mounting bracket against the wall and mark the wall where the holes are. Drill
holes and secure bracket to the wall as shown in illustration A. Screws are not provided.
Step 2
1. Install strainer assembly.
2. Install supply lines to sensor faucet head.
3. Install faucets head through mounting hole top center of sink and tightly secure.
4. Plumb hot and cold water to each inline filter
Step 3
1. Position the sink onto wall bracket and fasten to wall.
Step 4
1. Connect waste line to strainer assembly.
2. Mount sensor control box at desired location on wall.
3. Connect power line from sensor to control box.
4. Connect sensor power cable to control box. If Battery powered skip this step
5. Connect hot and cold-water lines from Sensor faucet head to the water source (inline filters).
6. Remove aerator from the spout assembly and flush water system.
7. Check connections for leaks.
8. Replace aerator onto the spout.
9. We recommend sealing top of backsplash to wall as shown in illustration B.
Parts List
(1) Wall mount sink
(1) AC or Battery powered sensor faucet assembly
(1) Wall-mounting bracket
(1) Strainer assembly with basket

4.75in
120.7mm
24in
609.6mm
28.75in
730.3mm
15.38125in
390.7mm
6.78125in
172.2mm
4.75in
120.7mm
17.5in
443.5mm
24.75in
628.7mm
.5in
12.7mm
2in
50.8mm
3in
75.1mm
9in
227mm
12.44in
315.9mm
30deg
Front Side
Top
2” (51mm)
1.5” (38mm)
back splash
.25” dia. hole (6mm)
wall hanger
Wall Mounting Detail
Hole Configuration
26.15in
664.1mm
34in
863.6mm
17in
431.8mm
17in
431.8mm
3in
64.5mm
30in
762mm
8in
203.2mm
34in
863.6mm
2in
50.8mm
17in
431.8mm
17in
431.8mm
1.25in
31.8mm
3
COLUMBIA SPECIFICATIONS
1622 Browning Irvine, CA 92606-4809 Phone: [phone] Toll Free: 800.626.2117 Fax: [phone] www.columbiasinks.com email: [e-mail]
©2018 Columbia Products
WALL MOUNTED SINKS

ISO 9001 Cered
4000C-SD-LR Series
U.S. Patent 6192530B1, 4741363
AC or Baery Powered Sensor Operated Faucet
The 4000-C-SD-LR Series faucet is a single-hole deck
mounted, piston operated sensory faucet that provides a
vandal resistant, no touch lavatory soluon with hot/cold
mixing and manual on/o that promotes beer hygiene
and energy savings.
• ADA Compliant. Meets all barrier free codes
• Conserves water and energy
• Easily installed in new or retrot applicaons
• Compevely priced for today’s commercial market
• Promotes cleanliness & hygiene
• Proven Hydrotek crasmanship and reliability
Available in:
AC Powered Models
DLow Lead, AC Powered Scrub Sink (H-4000C-SD-LR)
DLow Lead, AC Powered with DC Backup Scrub Sink (H-4000C-SD-LRDC)
Baery Powered Models
DLow Lead, Baery Powered Scrub Sink Version (HB-4000C-SD-LR)
• ACCU-SENSE adjustable sensor eyes.
• Chrome plated, solid brass construcon.
• Wall mountable, waterproof control box with
armored, vandal resistant control and power
cables.
• Preset/adjustable sensor range of 6” - 30” for
various installaon requirements.
• Standard automac me-out feature. Preset
at 30 seconds, but adjustable to 10, 30, or 60
seconds. Prevents accidental sink overow.
• Shut-o delay is adjustable from 1 (preset) to 8
seconds.
• Solid brass body with single hole deck mounng.
Oponal 4” or 8” cover plate for 3 point
anchoring.
• Includes in-line lter with clean-out trap to
reduce maintenance costs.
• All parts are eld-replaceable to ensure quick
and easy repair.
• Same faucet-eld switchable to AC or baery
powered.
• AC with DC backup models automacally switch
to baeries during a power outage.
• Manual override provides connuous water ow
for special applicaons or in case of failure.
• Manual controlled temperature adjustment.
• Slow closing, piston-operated solenoid valve
provides reliable and smooth operaon without
water hammer.
• Superior VSI silicone elastomer piston seals
are unaected by chlorine, chloromines, or
ammonia.
• Standard 2.5 GPM Rose Spray Flow Control.
• Control module allows a unique self-check of all
electrical components.
Features:

Hydrotek Automac Faucets
4000C-SD-LR Series
Deck Mounted / Mixing / Manual On & O with Temperature Adjust
Meets ANSI/ASME A112.18.1 M-1989
Operaon:
1. A connuous, invisible beam is emied from the sensor.
2. The faucet is acvated by placing hands under the spout within the eecve
range of the beam. Water starts to ow immediately for as long as the user’s
hands remain in the sensor range.
3. When hands are removed, the water ow stops. The sensor will automacally
reset and be ready for the next user.
4. In the baery powered version, a ashing red light will indicate a low baery
condion.
5. Use the faucet handle for temperature adjustment and manual on/o.
Specicaons:
Faucet Construcon: - Solid brass, chrome plated
Control Circuit: - Solid state, AC or baery, switchable
Auto. Time-out: - Preset at 20 seconds and adjustable
to 10, 30, or 60 seconds
Line Purge (request only): - 2 minute run every 12 hours or 24 hours
Scrub Mode Delay (request only): - 60, 120, 180 seconds
Sensor Range: - Preset and adjustable
Shut-o Delay: - Presets and adjustable from 1-8 seconds
Control Cable: - Armored, vandal resistant
Solenoid Valve: - 6V DC, normally closed
- Waage: 0.4W (idle), 5W (in use)
- Operang Pressure: 5 psi to 125 psi
Flow Control: - 2.5 GPM Rose Spray for scrub sink
- 2.0 GPM Laminar (Oponal)
AC Mode
Power Adapter
Standard Plug-in: - Input AC 120V 60 Hz or 220V
(UL/CSA) - Output DC 12V, 0.8A/Class 2
Power Cable: - Armored, vandal resistant
Oponal Mul-Unit Adapter: - Serves up to 8 faucets
(UL/CSA) - Input AC 120V, Output DC 12V, 3A
Baery Mode
Baery Powered Models: - (4) AA Alkaline Baeries
Baery Service Life: - 400,000 on/o cycles, up to 4 years
Package Includes:
(1) Faucet with electronic sensor
(1) Control box
(1) 12V DC plug-in power adaptor (H-4000C, -DC, -LR and -LRDC only)
(1) In-line lter with clean-out trap
(1) Flex, S.S. supply tube, 3/8”
(1) 6” Gooseneck Spout
(1) Mounng hardware
(1) 2.0 GPM Flow Control
(4) AA Alkaline baeries (HB-4000C, -DC, -LR, -LRDC only)
(1) Baery holder (HB-4000C, -DC, -LR, -LRDC only)
Dimensions:
Base Width (Outside Measurement) 2-1/2”
Base Depth 2”
Faucet Height (Aerator to Base) 10-1/4”
Faucet Height Overall 15-1/4 ”
Depth (Center of Aerator to Center of Faucet Base) 5-1/8”
Mounng Bolt Length 2-1/2”
Mounng Bolt Paern Single-hole mount
Oponal Variaons and Accessories
• 1.5 GPM So-Flow Aerator; 0.35, 0.5, 2.2 GPM Laminar Flow
• 4” or 8” Centerset Cover Plate
• HC-010 Mul-Unit Voltage Adapter (AC Powered Only) - 8 units
• HC-0104 Mul-Unit Voltage Adapter (AC Powered Only) - 4 units
• HBL-04 Thermostac Mixing Valve with Checks
HYDROTEK INTERNATIONAL, INC.
5055 Forsyth Commerce Rd., Ste 124
Orlando, FL 32807
800.922.9883 (Phone)
866.670.5580 (Fax)
www.hydrotekintl.com
8” (203 mm)
15-1/4” (387 mm)
10-1/4” (260 mm)
6-1/2” (165 mm)
19” (483 mm) MAX
2-5/8”
(67 mm)
H-4000C-SD-LR
(AC Powered)
Only