Wayfair AW3321A1Q User manual

User Manual
AW3321A1Q

Warranty
This product has been manufactured and inspected to
the highest possible quality standards. Our sinks carry a
limited 5 years warranty for residential use.
Should you experience any defects in materials or
workmanship within the warranty period, we will repair
or replace the defective product, subject to the following
conditions:
•Any claim made under this warranty must include
a copy of a valid proof of purchase showing the date and
place of purchase.
• Our obligation under this warranty is to the
original purchaser only, and may not be transferred.
•Product replacement does not include shipping
costs or labor installation costs.
•This warranty applies to residential installations
only.
• We reserve the right to examine product in ques-
tion and its installation prior to replacement.
•If an identical replacement product is not
available, We reserve the right to replace the
defective product with a similar product.
This warranty relates to defects in manufacture, materials
or workmanship in a stainless steel kitchen sink supplied
for installation into domestic premises in the United States.
It does not extend to :
•Damage resulting from failure to maintain the
product in accordance with the Care and Maintenance
instructions in this manual.
•Normal wear and tear, scratches or accidental
damage.
•Faults arising from improper use and/or
installation.
• Defects in accessories, strainers and rinse grids.
All incidental or consequential damages are specifi- cally
excluded. No additional warranties, express or implied are
given, including but not limited to, any implied warranty of
merchantability or fitness for a particular purpose.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitations on how
long an implied warranty lasts, so the above limitations or
exclusions may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
1

Features
•18 Gauge stainless steel
•Premium 304 grade stainless steel
•Heavy duty sound guard padding and undercoating
•Slanted bottom with elegant drain grooves
for easy draining
•Round corners (R10) for easy cleaning
•Drain placement – Rear
AW3321A1Q 33" 21"9"
Mode Width
Length Depth
Single Bowl Apron-Front Kitchen Sink
In Accordance with Industry Codes&Standards for USA&Canada All
Stainless Steel Kitchen Sinks are Certified & Listed By cUPC.
• Sink
• Mounting and installing brackets
• Accessories
In the Box
Dimensions
Accessories (Included)
Stainless steel grid Sink Strainer

Prior to installation steps:
1. Unpack your new product and ensure that all the parts are contained in the
packaging.
2. Keep the product in its original box until you are ready to install it.
3. The counter top must be flat.
4. Shut off the water supply if replacing a previously-installed vessel sink.
5. Observe all plumbing and building codes in your area.
6. It is recommended that installation of the product be done by a professional
plumber.
Decide on your preference prior to installation.
Alignment of sink to cutout is critical for a superior fit and finished look. Depending on
your aesthetic preference, sinks can be installed either with a 1/4” reveal, flush fit, or
with a negative reveal. 1/4” reveal is recommended.
7.We are not responsible for improper sink or countertop installation. We are not
liable for any damages to sink or countertop or personal injury during installation.
COUNTERTOP
SEALANT
1/4"REVEAL
CABINET WALL
SUPPORTING
FRAME
2 SUPPORT BARS RUNNING
BELOW THE SINK (FRONT
AND BACK)
3

Installation
1.
2.
3.
4.
5.
6.
7.
8.
Due to the various cutout sizes
possible (based on your
preference) a cut out template
is not provided. Use the actual
sink measurement to determine
the actual location of the
cutout. Ensure adequate
clearance behind the sink for
any faucet and backsplash.
Measure sink apron and cabinet
opening to make sure sink
apron will fit into cabinet
opening. If necessary, sand
opening or add wood filler
strips.
Prepare the cabinet and create a
support frame inside the cabinet
that the sink will sit on. Use 2x4
solid wood studs to create the
support frame. Your cabinet and
support frame should be strong
enough to hold up to 200 lbs of
weight once installed. The
support frame should be
positioned so that the top of the
sink rim is level and flush with
the top surface of the cabinet
perimeter. Make sure the
support frame leaves room for
the drains, faucet water lines,
garbage disposal (if any).
Trace cut-out opening on the
countertop. Cut out the opening
in the counter top. Use an Orbital
sander or sanding block to
smooth the edge of the cut-out
area and remove all saw marks.
For laminate type countertop, all
exposed unlaminated surfaces
near the cut-out opening must be
adequately fnished and sealed to
prevent water damage.
Place a thin layer of sealant on
the supporting frame where it
will contact the sink
Gently position the sink on the
frame. Verify that the sink sits
level and sturdy on the frame,
and the top surface of the sink
is level and flush with the top
surface of the cabinet
perimeter. Adjust or shim
between the sink and support
if necessary.
Clean the rim of the sink and the
under surface of the countertop
where it will contact the rim.
Apply a generous bead of sealant
around the sink rim.
Gently position the countertop
on the sink. Ensure that the
sealant provides a complete
seal between the countertop
and the sink. Wipe off any extra
sealant using a wet cloth, and
apply extra sealant if there are
any gaps
4

POSITIVE:
BACK:
10”
(258mm)
3/4”
(18mm)
30”(765mm)
10”
(255mm)
20”
(507mm)
Apron Kitchen Sink
MJ-285R
POSITIVE:
BACK:
10”
(258mm)
3/4”
(18mm)
30”(765mm)
10”
(255mm)
20”
(507mm)
Apron Kitchen Sink
MJ-285R
Step1: Taking apart the sink strainer, put
the upper strainer body and gasket into
the sink hole
Step2: Put the lower strainer and gasket
connect to the upper part under the sink.
Step3: Connect the drain tailpiece Step4: Connect the trap. Run water and check
for leaks.
Step5: Insert the basket.
Strainer Installation Guide
5

Care and Maintenance
"The Do's"
1. When it comes to maintenance, the best thing you can do is be consistent in your
cleaning. It is preferable to clean a little on a frequent basis than a heavy duty cleaning
once in a while.
2. You should make sure that the sink is always clean and dry when not in use. This is the
best method of preventative maintenance. Keep the sink water spot free and shiny by
rinsing and towel drying after every use.
3. Keep the single clog free to prevent standing water which can lead to mineral deposit
build up.
4. If a mineral build up should occur, use a mixture of vinegar and hot water to remove
the deposit.
5. To clean your sink, use a non abrasive cleaning cloth combined with a mild cleaning
procedure.
* Use a soft cloth and liquid detergent on a mirror finish deck.
* Do Not Use Any Abrasive Materials On Sink Finish
* For tougher stains use a mild abrasive cleaner like Ajax or Comet.
6. Wipe the sink dry after cleaning to discourage any water spotting.
7. Follow the direction of the grain when cleaning or scrubbing away stains. Scrubbing
against the grain will show as a scratch.
"The Don'ts"
1. Avoid using any abrasive steel wood pads as they will leave an iron residue that will
eventually lead to rust and corrosion.
2. Do not leave any steel or cast iron cookware in the sink for a long period of time. This
may also leave iron particles that will corrode the sink
3. Do not leave any cleaning materials such as sponges or rags in the sink for an
extended period of time.
Anything left in the sink can trap moisture which will eventually lead to staining
4. Avoid using any avrasive cleaning materials such as steel wool pads on the polished
finish of the sink, this will lead to scratching.
6