Important note
➢This product is strictly forbidden to be used outdoors and frozen area.
➢For the first time use, please run water, then plug the power.
➢The outlet water temperature should be less than 60˚.
➢The nozzle should be cleaned regularly, must disconnect the power when cleaning.
➢If water freezes in faucet, strictly prohibited to connect to electricity power.
➢Ensure this faucet connect with earth line, otherwise not use this faucet.
➢The faucet need water pressure is 0.04MPa-0.5Mpa.
➢Please turn the knob to cold water area for 5 seconds after each using, to avoid scalding
hands when next time use, which also extend service life of the heating element.
➢If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
➢When using the electric faucet, do not use other high-power electric appliances (such as
air conditioning, induction cooker, electric kettle, etc.)
➢This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
➢Children should be supervised to ensure that they do not play with the appliance.
➢The outlet must not be connected to any tap or fitting other than those specified.
➢These appliances are not intended for showering purposes.
➢This appliance can be used by children aged from 3 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Cleaning and user maintenance shall not be
made by children without supervision.
➢The water inlet of this appliance shall not connected to inlet water obtained from any
other water heating system.
➢This appliance is not to be used for a potable water supply.
Preparation work before installation
Because this faucet power is larger, please check electricity meter, electric brake, fuse,
whether there is a switch on the electric circuit. The capacity of these devices should
satisfy the need of rated current of faucet.
Make sure there is earth line in the plug base. That is the actual existence of earth line in
the plug base.
Before use, please check whether the actual voltage correspond with voltage marked on
the faucet. If the user is not understand, please contact the local dealer.
Installation method
1.Remove the previous faucet, side installation method as shown picture 1
Stand installation method as shown in picture 2
According to the picture shown, please fix and connect with the corresponding waterway,
install the safety valve between the city water pipe and faucet water inlet.
2.Turn the knob and let the water out, check various components whether water leakage,
if normal then continue in the next step --- installation of circuit.
