Page 1
Quick Install Guide
SATA to 10/100 LAN/USB2.0, LAN Share Disk
1. Getting Started
Kit Contents
①Reset Button
②10/100 LAN Connector
③USB2.0 Device Connector
④DC Power Connector
⑤Power Switch
⑥Power/Access LED Indicator
●Enclosure
●LAN cable
●USB cable
●Power Adapter
●Installation CD
●QIG
Minimum System Requirements
●Windows XP/VISTA
2. Start to Assemble & Connect
Install SATA hard disk into the enclosure
Pull out the HDD tray and follow the below steps to install SATA hard disk by screws.
Cable connection and power on ME-745K
First of all, if using the LAN service provided by
ME-745K, please make sure your PC is networked.
Then please connect LAN cable to the LAN port of
the ME-745K and put the other end to the RJ45 of
your network. Connecting the power cable, and
power on ME-745K.
Or you can connect USB cable between your
computer and ME-745K to use it as a simple
external USB disk
3. Start to use sharing function of ME-745K over LAN
Install RallyStorage Program
Insert the CD into your PC and find RallyStorage WINXP vista
1201” for installation. Please double click to execute, and setup
wizard will lead you to install this application program.
