Westinghouse WD32HBB101 User manual

WD32HBB101

USB
32
33
Menu
VGA PC Connection
USB Port Function
1
Audio

40 W
3
49

B4x18F
B4x18F
Wall-Mounting Screws
Mount the VESA bracket using 4*M6*10 isometric threaded screws (not included).
WARNING:
with the installation instruction.
WARNING：
Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be acoided by taking simple precautions such as:
-Using cabinets or stands recommended by the manufacturer of the television set.
-Only using furniture that can safely support the television set.
-Ensuring the television set is not overhanging the edge of the supporting furniture.
-Not placing the television set on tall furniture(for example, cupboards or bookcases) without anchoring
both the furniture and the television set to a suitable support.
-Not placing the television set on cloth or other materials that may be located between the television
set and supporting furniture.
-Educating children about the dangers of climbing on furniture to reach the television set or its controls.
If your existing television set is being retained and relocated, the same considerations as above should be
applied.
 1.Lay the TV face down on a flat,
cushioned surface to avoid damaging
or scratching.
 2. gnidlohswercsscp4ehtnethgitnU
the stand assembly and remove them.
 3.Attach the wall-mount bracket to
the TV using the mounting holes on
the back of the TV. Mount this TV
according to the instructions included
in the wall-mount bracket.
Installing the Stand
Removing the Stand for Wall-Mounting

7
Quick Connect Guide
Quick
Connect
Guide
User Manual
User Manual
Remote Control with Batteries
Warranty Card
Warranty
Card
TV Set
TV Stand Four Screws(B4x18F).

and Audio
and Audio
Headphone: Connect a stereo headphone for private listening.
HDMI3 HDMI2 USB
5V 500mA
8
Optical Output: Connect a digital sound system to this jack.
POWER

HDMI 1 HDMI 2 VGA PC AUDIO
PC IN
1. VOL -/+
Press to adjust the volume.
2. CH -/+
Press to select a channel.
3. MENU / SOURCE
Display the OSD (on screen display) menu.
Press to select among different input signal sources.
4. POWER
Switch the TV between On / Standby mode.
5. IR (Infrared Receiver)
Receive IR signals from the remote control.
POWER Indicator
Illuminate blue when the TV is turned on.
Illuminate red when the TV is in standby mode.

9