WEWATCH V50 Pro User manual

PROJECTOR
User Manual

English 4
SAFETY INSTRUCTIONS 1
PACKAGE LISTS 3
PRODUCT OVERVIEW 3
GETTING START 7
SETTINGS 9
WIRELESS CONNECTION 11
SPECIFICATIONS 12
TROUBLESHOOTING 13
Français 28
Consignes de sécurité 29
Contenu du paquet 31
Aperçu du produit 32
Démarrage 35
Paramètres 37
Connexion sans 󽗉l 39
Fiche technique 40
Dépannage 41
español 56 CONTACT US 70
Instrucciones de seguridad 57
Listas del paquete 59
Descripción general del producto 60
Primeros pasos 63
Con󽗉guración 65
Conexión inalámbrica 67
Especi󽗉caciones 68
Solución de problemas 69
Deutsch 14
Sicherheitshinweise 15
Paket-Listen 17
Produktübersicht 18
Erste Schritte 21
Einstellungen 23
Drahtlose Verbindung 25
Spezi󽗉kationen 26
Fehlersuche 27
italiano 42
Istruzioni di sicurezza 43
Pezzi nel pacco 45
Panoramica del prodotto 46
Come iniziare 49
Impostazioni 51
Connessione wireless 53
Speci󽗉che tecniche 54
Risoluzione dei problemi 55

English

1
SAFETY INSTRUCTIONS
Setup
Read all instructions before you use this device. Do not make any changes or create settings that are
not described in this manual. If physical injury, loss of data, or damage is caused by failure to follow
instructions, the warranty does not apply.
• To reduce the risk of 󽗉re and / or electric shock, do not expose the device to rain or moisture.
Objects 󽗉lled with liquids, such as vases, should not be placed on this device.
• Do not place this device on soft surfaces such as tablecloths or carpets, otherwise the device could
be a 󽗉re hazard.
• Do not place this device in areas susceptible to excessive dust and dirt or near any appliance
generating a strong magnetic 󽗉eld.
• To prevent overheating, do not block or clog the ventilation openings.
• Never place this device in a con󽗉ned space. Always leave enough space around this device for
ventilation.
• Avoid overexposing this device to direct sunlight, heat, large temperature 󽗊uctuations, and
moisture. Avoid extreme temperatures. The suitable operation and storage temperature for this
device and its accessories is 41° F to 95° F / 5° C to 35° C .
• When this device is running for a long period of time, the surface may become hot. If this occurs,
shut it down immediately and unplug the charger. Resume operation after the device has cooled
down.
• Always handle this device with care. Avoid touching the lens.
• Do not allow children to handle the device without supervision.
• Do not place heavy or sharp objects on this device.
• To avoid electric shock, do not disassemble the device.
• Only use attachments or accessories speci󽗉ed by the manufacturer.
• Avoid extreme vibrations as they may damage the internal components.

2
Power Supply
Repairs
Hearing Safety
• Use only the provided power cable.
• Power o󽗈 the device before removing the power supply from the socket.
• Protect the power cord from being walked on or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from this device.
• Unplug this device if there are lightning storms or when unused for a long period of time.
• Where the power plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
• Before you make or change any connections, ensure that all devices are disconnected from the
power outlet.
• Never touch the power cable or the power connector with wet hands.
• Do not make any repairs to this device
yourself. Only have your device repaired by
an authorized service center.
• Improper maintenance can result in injuries
to persons or damage to this device.
• Refer all servicing to quali󽗉ed service
personnel.
• To prevent hearing damage, do not listen
for extended periods at high volume. Set the
volume to a safe level.
Cleaning
• Use a soft, lint-free cloth. Never use liquid,
gaseous, or easily 󽗊ammable cleansers to
clean.
• Do not use any liquid cleaning agents to clean
the lens to avoid damaging the coating 󽗉lm
on the lens.
• Wipe the surfaces gently. Be careful that you
do not scratch the surface.
• Use lens cleaning paper to clean the lens.

3
PACKAGE LISTS
PRODUCT OVERVIEW
Projector Remote Control
HDMI Cable User Manual
Power Cable
×1 ×1
×1
×1
×1
15 6
2 4
3
1. Lens
2. Infrared Receiver (front)
3. Infrared Receiver (back)
4. Speaker
5. Power Port
6. Dust Filter Screen

4
10
11
12
7 98
7. Air Outlet 8. Ports 9. Air Inlet
10. Operation Buttons
11. Roller
12. 1/4" Female Thread Tripod Mounting Screw Hole

5
Caution
Operation Panel
• Do not look directly into the lens to avoid eye damage as this projector emits strong light during
use.
• Do not place any objects near the Air inlet and outlet,as this may cause heat to build up inside the
projector.
1. Power Button
2. Return
3. Left
4. Up
5. Down
6. OK
7. Right
8. Menu
9. Signal Source
10. Keystone Correction
11. Focus Adjustment
1 2 3 5 7 8 9
4 6
11
10

6
Connection Ports
Remote
1. Headphone Jack
• Connect to earphone or external speakers
2. AV Input Interface
• Connect to DVD player, VCD, etc
3. TF Card Slot
• Maximum reading support 32GB Micro SDHC card
4. HDMI Input Port
• Connect to Laptop, Dongle, PS5, Switch, etc.
5. USB Port
• Maximum reading support 32GB USB 󽗊ash disk
• File system requirement: FAT32
• Maximum reading support 1TB Portable hard disk
• File system requirement: NTFS
6. VGA Port
• Connect to PC/Laptop including VGA port
1. Power Switch
2. Menu
3. Move Left/Rewind
4. Move Down/Next File
5. Pause/Play
6. Volume -
7. Select Signal Source
8. Move Up/Previous File
9. Move Right/Fast Forward
10. OK/Con󽗉rm
11. Exit/Return
12. Volume +
13. Mute
1 3
2 4 5 6
1
2
6
5
7
12
11
910 3
4
8
13

7
Caution
Placement
• Pay attention to the positive and negative poles when installing batteries in the remote control
（Accessories do not include batteries）
• The remote control contains swallowing batteries. Keep the remote control out of the reach of
children.
• Remove the batteries when the remote control has not been used for a long period of time.
• Replace the remote control batteries only with the same or an equivalent type.
• It is recommended that the distance between the remote and the projector is no more than 5
meters.
Place V50 Pro on a stable, 󽗊at surface in front of
the projection surface. For the best results, the
projection surface should be white and 󽗊at.
Recommended projection distance:2-3.5 m (6.6-
11.5 ft)
(The graph is for reference. Distances may vary ＋ /-5%）
GETTING START
Aspect ratio 16:9
Screen Size Distance
50" 163 cm (5.3 ft)
60" 193 cm (6.3 ft)
80" 251 cm (8.2 ft)
120" 367 cm (12 ft)
150" 458 cm (15 ft)

8
Installing the Projector
Correcting Keystone Adjusting Image Clarity
The projector has a screw hole at the bottom allowing it to be mounted on a tripod, on the ceiling or
wall mounted according to the di󽗈erent environment.
Note
• Screw size requirement: 1/4in-20 male screw thread.
• The mounting tripod or bracket needs to be purchased separately.
Adjust the keystone dial ring to correct keystone
distortion to make the top or bottom of the
screen longer or shorter so that the projected
image is rectangular.
Tips: The projector has only vertical keystone
correction. When correcting keystone, make sure
the projector is placed in level with the screen.
Rotate the focus ring slowly to sharpen the
image. At the same time, check the resolution
point carefully. The best focus point for the lens
would be where the image is most clear. If it is
still blurry, please try to adjust the projection
distance.

9
How to Clean “Black Spot”
Over time, the projector lens can accumulate dust which creates black spots across your image and
leads to color and brightness decay 󽗉nally. To clean the black spot:
• Take out the dust 󽗉lter on the side of the air inlet and clean it once a month. (In dusty environments,
it is recommended to clean it once a week)
• Gently tap the projector to make the dust fall o󽗈.
• Tear o󽗈 the nameplate label at the bottom of the projector, open the dust port cover underneath,
and use a cotton swab to clean the lens and screen.
Tips: Turn o󽗈 the power and unplug the projector before cleaning the projector.
Bluetooth
1. Select [Settings] > [Bluetooth] > [BT Mode--switch On] > [Search]
2. Select your Bluetooth device name in the list and connect.
Tips
• The V50 Pro can connect a Bluetooth speaker or Bluetooth headphones.
• A certain distance is required for the Bluetooth function. The recommended distance is less than 8 feet.
• If you can not 󽗉nd the Bluetooth device, please restart your Bluetooth device and search again. Or you can
contact our o󽗋cial e-mail for help.
SETTINGS

10
Network
Projector Setting
Others
The V50 Pro can be connected to the Internet via a wireless (WiFi) connection.
1. Select [Settings] > [Network] > [Network Information] > [Scan]
2. Select your WiFi name from the list, enter the password, and connect.
Picture Mode [Standard] / [Dynamic] / [Mild] / [User]
Color Temperature [Medium] / [Cool] / [Warm] / [User]
Noise Reduction [O󽗈] / [Low] / [Middle] / [High]
Sound Mode [Standard] / [Movie] / [Music] / [Sports] / [User]
OSD Language Select an on-screen display language
Aspect Ratio [AUTO] / [4:3][16:9] Only for multimedia display
Restore Factory Default All data and setting on the built-in storage will be erased.
Projection Mode
[Front]: The projector is located in front of the projection surface.
[Rear on Desk]: The projector is located behind the projection surface.
[Front on ceiling]: The projector is hanging from the ceiling in an upside down position.
The image is rotated by 180 degrees.
[Rear on ceiling]: The projector is hanging from the ceiling in an upside down position
behind the projection surface. The image is rotated by 180 degrees and horizontally
mirrored.
Projection Zoom [50%--100%]: Adjust the projection screen size.

11
WIRELESS CONNECTION
iOS AP Mirroring
1. Turn on the WiFi on your iPhone/iPad and connect to the following WiFi: [V50Pro-XXXX].
2. Open Control Center and tap Screen Mirroring on your iPhone/iPad and then choose [V50Pro-XXXX].
Cast movies, games, and music from your phone or tablet onto the big screen. However, please note
that screen mirroring may not be compatible with all mobile devices, and in such cases, a Type-C to
HDMI or Lightning to HDMI adapter can be used. Please be advised that due to copyright restrictions,
certain content such as Net󽗊ix, Amazon Prime Video, Disney+, Hulu, and HBO cannot be cast and can
only be streamed by connecting to a PC, laptop, TV stick, or TV box through an HDMI cable.
Note
AP mode is suitable for use when there is no WiFi. After connection, cellular data can be used
for internet access, but the AP hotspot cannot provide internet services.
iOS WiFi Mirroring
For iPhone/iPad
• Go to Network Setting and connect to your
WiFi.
• Turn on the WiFi on your iPhone/iPad and
connect to the same WiFi.
• Open Control Center and tap Screen Mirroring
on your iPhone/iPad and then choose
[V50Pro-XXXX].
For MacBook
• Connect your MacBook to your home WiFi
• Click the Apple logo on the top left > [System
Preference] > [Sharing] > [Airplay Display]
• Select [V50Pro-XXXX] to connect and start
wireless projection.

12
SPECIFICATIONS
Model: V50 Pro
Power Supply AC: 100-120/200-240V，50/60Hz Power Consumption 100W
Display Technology LCD Light source LED
Resolution 1920*1080P Focus Manual
Multimedia Supported File
Audio Format AAC/MP2/MP3/PCM/FLAC
Video Format AVI/MP4/FLV/MOV/3GP/MPEG1/MPEG2/H.264 Max up to 1980*1080
Image Format Jpg/png/bmp/jpeg
(Speci󽗉cations and design are subject to change without notice.)
Android Mirroring
1. Turn on the WLAN of the Android phones/tablets.
2. Tap the Wireless Projection or Screen Mirroring function on your device.（Names may vary from
device brand）
3. Select [V50Pro-XXXX] to connect and start wireless projection.

13
TROUBLESHOOTING
Cannot play streaming media
app,like Net󽗊ix,Prime Video, Disney
Those apps are limited due to copyright restrictions.You can stream the
content via connect with PC, laptop,TV stick, TV box through HDMI cable.
Cannot play streaming media
app,like Net󽗊ix,Prime Video, Disney
1.Refresh the list of available networks and retry.
2. Reboot the wireless router or the projector and retry.
Remote control doesn’t work
1.Make sure there is no obstruction between remote control and projector.
2.Make sure the battery is already installed in the remote control.
3.Replace the batteries.
Picture is playing, no sound
1. When using USB 󽗊ash drive: the audio format is not supported, try to
change media source.
2. When using the TV stick: Dolby sound decoding is not supported. It is
necessary to adjust the audio Settings of the TV stick
Take Amazon Fire TV Stick as an example: Setting-Display&Sound-Audio-
Surround Sound-PCM.
4.Volume at minimum or on mute.
Cannot 󽗉nd device when connected
with 󽗊ash drive or hard drive
1.Make sure your drive's 󽗉le system and Maximum capacity are acceptable.
2.Re-plug the device.
3.Check if the device is broke.
Projection picture has dust and black
spots
1.Exert yourself to 󽗊ap the body of projector.
2.Use the cotton swab to remove dust from lenses or screen.

Deutsch

15
Sicherheitshinweise
Einrichtung
Lesen Sie alle Anweisungen, bevor Sie das Gerät verwenden. Nehmen Sie keine Änderungen oder
Einstellungen vor, die nicht in dieser Anleitung beschrieben sind. Wenn Körperverletzungen,
Datenverluste oder Schäden durch Nichtbeachtung der Anweisungen verursacht werden, gilt die
Garantie nicht.
• Setzen Sie das Gerät nicht Regen oder Feuchtigkeit aus, um das Risiko eines Brandes und/oder
eines elektrischen Schlages zu verringern. Mit Flüssigkeiten gefüllte Gegenstände, wie z. B. Vasen,
sollten nicht auf diesem Gerät abgestellt werden.
• Stellen Sie das Gerät nicht auf weiche Ober󽗊ächen wie Tischtücher oder Teppiche, da sonst
Brandgefahr besteht.
• - Stellen Sie dieses Gerät nicht an Orten auf, die anfällig für übermäßigen Staub und Schmutz sind,
oder in der Nähe von Geräten, die ein starkes Magnetfeld erzeugen.
• Um eine Überhitzung zu vermeiden, dürfen Sie die Lüftungsö󽗈nungen nicht blockieren oder
verstopfen.
• Stellen Sie dieses Gerät niemals in einem engen Raum auf. Lassen Sie um das Gerät herum immer
genügend Platz zur Belüftung.
• Setzen Sie das Gerät nicht zu sehr direktem Sonnenlicht, Hitze, starken Temperaturschwankungen
und Feuchtigkeit aus. Vermeiden Sie extreme Temperaturen. Die geeignete Betriebs- und
Lagertemperatur für dieses Gerät und sein Zubehör ist 41° F bis 95° F / 5° C bis 35° C.
• Wenn das Gerät über einen längeren Zeitraum in Betrieb ist, kann die Ober󽗊äche heiß werden.
Schalten Sie das Gerät in diesem Fall sofort aus und ziehen Sie den Stecker des Ladegeräts ab.
Nehmen Sie den Betrieb wieder auf, wenn sich das Gerät abgekühlt hat.
• Behandeln Sie dieses Gerät stets mit Vorsicht. Vermeiden Sie es, das Objektiv zu berühren.
• Erlauben Sie Kindern nicht, das Gerät ohne Aufsicht zu bedienen.
• Stellen Sie keine schweren oder scharfen Gegenstände auf das Gerät.
• Um einen elektrischen Schlag zu vermeiden, darf das Gerät nicht zerlegt werden.

16
Stromversorgung
Sicherheit des Gehörs
Reinigung
• Verwenden Sie nur das mitgelieferte Netzkabel.
• Schalten Sie das Gerät aus, bevor Sie das Netzgerät aus der Steckdose ziehen.
• Schützen Sie das Netzkabel davor, dass jemand darauf tritt oder es einklemmt, insbesondere an
Steckern, Steckdosen und an der Stelle, an der es aus dem Gerät austritt.
• Ziehen Sie den Netzstecker, wenn es Gewitter gibt oder wenn Sie das Gerät längere Zeit nicht
benutzen.
• Wird der Netzstecker oder eine Gerätekupplung als Trennvorrichtung verwendet, muss die
Trennvorrichtung leicht bedienbar bleiben.
• Vergewissern Sie sich vor dem Herstellen oder Ändern von Anschlüssen, dass alle Geräte von der
Steckdose getrennt sind.
• Berühren Sie das Netzkabel oder den Netzstecker niemals mit nassen Händen.
Um Gehörschäden zu vermeiden, sollten Sie das Gerät nicht über einen längeren Zeitraum mit hoher
Lautstärke hören. Stellen Sie die Lautstärke auf einen sicheren Wert ein.
• Verwenden Sie ein weiches, fusselfreies Tuch. Verwenden Sie zur Reinigung niemals 󽗊üssige,
gasförmige oder leicht ent󽗊ammbare Reinigungsmittel.
• Verwenden Sie zur Reinigung des Objektivs keine 󽗊üssigen Reinigungsmittel, um die Beschichtung
des Objektivs nicht zu beschädigen.
• Verwenden Sie nur die vom Hersteller angegebenen Anbaugeräte und Zubehörteile.
• Vermeiden Sie starke Erschütterungen, da diese die internen Komponenten beschädigen können.