WG WBOX-366 Series User manual

WBOX-366x User Manual
1
User ManualVer 0.1
WBOX-366x
INTEL® 6/7th or 8th Generation Core™processor
Intel® HD Graphics Integrated Graphics
2 x HDMI, Display
2 x REALTEK RTL8111H GbE LAN
1 x RS232, 1 x RS232/RS485 COM Option
1 x SODIMM DDR4 Socket
4 x USB3.0
2x M2 KEY-B M2-SATA/ WLAN Socket
DC12~19V Voltage input

WBOX-366x User Manual
ii
Copyright Notice
This document is copyrighted, © 2019 All rights are reserved. The original
manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced/ copied/ translated or transmitted in
any form or by any means without the prior written permission of the original
manufacturer. Information provided in this manual is intended to be accurate
and reliable. However, the original manufacturer assumes no responsibility for
its use, norfor any infringements upon the rights of third parties that may result
from such use.
Trademark Acknowledgement
Award is a trademark of Award Software International ,Inc..
VIA is a trademark of VIA Technologies, Inc..
IBM、PC/AT、PS/2 &VGA is a trademark of International Business Machines
Corporation. Intel®, Pentium® is a trademark of Intel Corporation.
Microsoft Windows® is a trademark of Microsoft Corp..
RTL is a trademark of Realtek Semi-Conductor Co., Ltd..
ESS is a trademark of ESS Technology, Inc..
UMis a trademark of United Microelectronics Corporation.
SMI is a trademark of Silicon Motion, Inc..
Creative is trademark of Creative Technology Ltd..
CHRONTEL is a trademark of Chrontel Inc..
All other product names or trademarks are properties of their respective owners.
For more information about this and other FUSHENGWELL products, please
visit our website at:http://www.fushengtek.com

WBOX-366x User Manual
iii
Warranty (1 Year)
FushengWell warrants to you, the original purchaser, that each of its products
will be free from defects in materials and workmanship for one year from the
date of purchase.
This warranty does not apply to any products which have been repaired or
altered by persons other than repair personnel authorized by FushengWell, or
which have been subject to misuse, abuse, accident or improper installation.
FushengWell assumes no liability under the terms of this warranty as a
consequence of such events.
Because of FushengWell’s high quality-control standards and rigorous testing,
most of our customers never need to use our repair service. If an FushengWell
product is defective, it will be repaired or replaced at no charge during the
warranty period. For outof-warranty repairs, you will be billed according to the
cost of replacement materials, service time and freight. Please consult your
dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU speed, FushengWell products used, other hardware and
software used, etc.) Note anything abnormal and list any onscreen
messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual,
product,and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA (return
merchandize authorization) number from your dealer. This allows us to
process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair and
Replacement Order Card and a photocopy proof of purchase date (such as
your sales receipt) in a shippable container. A product returned without
proof of the purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaidto your dealer.
Technical Support
1. Contact FushengWell's customer service center for technical support if you
need additional assistance. Please have the following information ready before
you call:
-Product name and serial number
-Description of your peripheral attachments
-Description of your software (operating system, version, application
software, etc.)

WBOX-366x User Manual
iv
-A complete description of the problem
-The exact words of any error messages
Packing List
Thanks for selecting our products.
Please make sure the package of motherboard you purchase is complete, if
there is any packing damage or parts shortages occurred; please contact the
representatives or distributors as soon as possible.
• 1 WBOX-366X Motherboard
• Thermal solution:
Part Number Description
710138970001 Cooler: 91*65*5mm, Silver color
Ordering Information
Model Number Description
WBOX-3665 INTEL® Intel i5-6200U 2.3GHz 15W CPU, 2 x HDMI,1 x
RS232 COM, 1 x RS232/RS485 COM,1 x DDR4 SODIMM, 2x
M2 KEY-B M2-SATA/ WLAN, 4*USB, 2 x GbE LAN;DC12-
19V Voltage input.
WBOX-3687 INTEL® Intel i7-8550U 1.8GHz 15W CPU, 2 x HDMI, 1 x
RS232 COM, 1 x RS232/RS485 COM,1 x DDR4 SODIMM, 2x
M2 KEY-B M2-SATA/ WLAN, 4*USB, 2 x GbE LAN;DC12-
19V Voltage input.

WBOX-366x User Manual
v
Contents
Chapter 1 General
Introduction ................................1
1.1 INTRODUCTION...........................................................................................................2
1.2 PRODUCT FEATURES.................................................................................................2
1.3 SPECIFICATIONS.........................................................................................................3
1.3.1 FUNCTIONAL SPECIFICATIONS.......................................................................................3
1.3.2 MECHANICAL SPECIFICATIONS......................................................................................4
1.3.3 ELECTRICAL SPECIFICATIONS.......................................................................................4
1.4 ENVIRONMENTAL SPECIFICATIONS........................................................................5
1.5 BLOCK DIAGRAM........................................................................................................6
Chapter 2 H/W Installation........................................6
2.1 MECHANICAL...............................................................................................................8
2.1.1 JUMPER AND CONNECTOR LOCATIONS..........................................................................8
2.1.2 BOARD DIMENSIONS ..................................................................................................10
2.1.3 CPU FAN MECHANICAL DIMENSIONS....................................................................12
2.2 JUMPERS ...................................................................................................................13
2.2.1 JUMPER DESCRIPTION................................................................................................13
2.2.2 JUMPER SETTING.......................................................................................................14
2.3 CONNECTORS ...........................................................................................................16
2.3.1 CONNECTOR LIST.......................................................................................................16
2.3.2 CONNECTORS FUNCTION AND PIN ASSIGNMENTS........................................................17

WBOX-366x User Manual
1
Chapter 1
General Introduction
This chapter gives background
information on the WBOX-366x
sections including:
Introduction
Product Features
Specifications
Environmental Specifications
Board layout and dimensions

WBOX-366x User Manual
2
1.1 Introduction
WBOX-366X is a 100x100(mm) SBC (Single Board Computer) with INTEL® 6/7th or
8th -Generation Serial processor. The WBOX-366X can support HDMI and EDP
display output, Audio, M2 KEY-B M2-SATA/ WLAN ,1 x RS232 and 1 x
RS232/RS485COM ports,
4Xusb3.0,1x DDR4 SODIMM,2xGbE LAN, DC12-19V Voltage input.
1.2 Product Features
Processor
System
CPU
INTEL® 6/7th or 8th Generation U Serial processor
CPU Socket
Onboard
BIOS
AMI SPI 64M
System
Memory
Tech Architecture
DDR4 2133MHz
Max Capacity
Up to 8GB
Socket
SO-DIMM (204pin)
Display
Graphic Controller
Intel® HD Graphics Integrated Graphic
HDMI
Support HDMI Port
Resolution: up to 4K
EDP
Support EDP Port
Resolution: up to 3K
Ethernet
Controller
LAN1: Realtek 8111H GbE LAN
LAN2: Realtek 8111H GbE LAN
Audio
Controller
Realtek ALC662 HD Audio Codec
Right & Left channel + MIC
Super I/O
Controller
NUVOTON NCT6106D
Support System temperature detection , Smart
FAN
H/W
Monitor
Watchdog Timer
Programmable 1 ~ 255 sec ; Support System
Reset
Smart Fan
1 * 4 Pin DC Fan control
USB
4 * USB3.0
Serial Port
2* COM option
M2 Key-B
1 * M2 Key-B WLAN socket, Support 3G Module
USIM
1 * Standard Small size SIM socket
Storage
M2 Key-B
1 * M2 Key-B M2-SATA socket

WBOX-366x User Manual
3
Power
Source
Power Supply
DC-in 12-19V @ 3A
Power Consumption
Typical PW:15W
Environme
nt
Operating
Temperature
-20°C ~ 60°C
Storage
Temperature
-40°C ~ 85°C
Operating Humidity
0% ~ 90% relative humidity(non-condensing)
Storage Humidity
0% ~ 90% relative humidity(non-condensing)
Form
Factor
Dimensions
100 mm * 100 mm
Regulatory Compliance
FCC, CE, RoHS compliant
1.3 Specifications
1.3.1Functional Specifications
Processor
32-Bit and 64-bit X86 Code Base, Dual-core and quad-core options
32-Kbyte L1 Data Cache per Core, 2048–KbyteL2 Cache Shared between Four
Cores
Dedicated 128-bit floating-point unit (FPU)
System Memory Support
•64-bit DDR4 SDRAM controller operating at frequencies up to 1600 MT/s (800 MHz)
• DDR4 1.2V up to 2133 MT/s
Integrated Graphics Controller
DirectX® 11.1 compliant, including full speed 32-bit floating point per component
operations
Support for OpenCL™ 1.2, DirectCompute 11 and Microsoft C++ AMP
Support for OpenGL 4.1/4.1+
Motion Video Acceleration Features
• Supports DVD, Blu-ray, and SDTV/HDTV content playback with low CPU usage
• Supports stereoscopic 3D Blu-ray
• Video compression engine:
• Dedicated hardware (VCE 2.0) assisted encoding of HD video streams to H.264
(main profile)
• Support H.264 SVC temporal scalability
• Real-time transcoding by encoding the output from UVD with reduction of CPU
utilization and power consumption
• Motion video decode acceleration technology:
• Dedicated hardware (UVD) for H.264, MPEG4, VC-1, MVC, and MPEG2 decode:
• H.264 implementation based on the ISO/IEC 14496-10 specification
• MPEG7 implementation based on the ISO/IEC 14496-2 specification
7 Sprite, global motion compensation, and reversible variable length coding are not

WBOX-366x User Manual
4
supported.
• VC-1 implementation based on the SMPTE 421M specification
• MPEG2 implementation based on the ISO 13818-2 specification
• Multi View Coding (MVC) for Blu-ray 3D content
• WMV-9 implementation
• Real time high-definition and standard definition stream decode
• Real time dual high-definition stream decode
Dedicated graphics memory controller, Up to 512MB of dynamic video memory
allocation
2D Acceleration
Three display supported: HDMI+EDP
Gigabit Ethernet
LAN:2 x REALTEK RTL8111H 10/100/1000 Mb/s Ethernet, supporting wake on LAN
LAN Connect Interface (LCI) and new Gigabit LAN Connect Interface (GLCI)
Supports IEEE 802.3, IEEE 802.3u, IEEE 802.ab
Peripheral Interface
2 M2 KEY-B M-SATA SSD/WLAN socket
4 USB 3.0 ports
1 RS232 1 RS232/RS485 COM port
Reset/Power bottom/Power LED/HDD LED
Watchdog timer: 255 levels timer interval, programmable by software
Audio: Realtek ALC662, High Definition Audio, Line-out, Mic-in
BIOS
Winbond64 Mbit SPI Flash ROM
OS Support
It supports Win8, Win7, and Linux Ubuntu 10.04 UP
OTHER
Deep sleep S4 mode
Watchdog Timer: Output system reset, programmable counter from 1-255 min/sec
1.3.2Mechanical Specifications
Dimensions: 100 x 100mm
1.3.3Electrical Specifications
Power supply type: ATX

WBOX-366x User Manual
5
Power management: ACPI 3.0, APM
Power requirement: +12V - +19V DC input. Support power input reverse direction
protection, recoverable fuse.
Power consumption:
Voltage
CL-3885U 1.6GHz
I5-6200U 2.3GHz
I7-8550U 1.8GHz
Current
Power
Current
Power
Current
Power
Idel Mode
+12V
0.5A
6W
0.55A
6.6W
0.6A
7.2W
Boot Mode
+12V
0.95A
11.4W
1.75A
2.80W
2.80A
33.6W
Full-load Mode
+12V
1.35A
16.2W
2.46A
3.60W
3.60A
43.2W
Power Test Conditions:
–Test Condition: Windows 7 professional Professional, Burntest ver 5.3, 32G
SSD
–Idel Mode: The power consumption without running any application software
after entering to Windows system.
–Boot Mode: The max Power consumption between power-on and entering to
system process.
–Full-load Mode: The power consumption under 100% full-load operation of
CPU and graphic card when running Burntest.
RTC Battery: Lithium 3 .3V/220mAH CR2032 battery
1.4 Environmental Specifications
Operating temperature: -20° C ~ 60° C (14 ~ 140° F)
Operating humidity: 40° C @95% RH Non-condensing
Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
Storage humidity: 60° C @95% RH Non-condensing

WBOX-366x User Manual
6
1.5 Block Diagram
Figure 1.5 Block Diagram
Intel® Core
I3/I5/I7 CPU
HDMI
LPC
HDMI
EDP
SODIMM
RTL811H
MINI_PCIE
/ mSATA
DUAL PORT
CH1
PCIE1-2
PEIE3
USB3.0 x 2
UART1
UART2
UART3
UART4
WTG
Pin-Header
USB2.0 x 2
KEY-B
SATA2
DUAL PORT
USB3.0 x 2
RJ45 x 2
DDR4
SIM
SATA
4G/SATA
SATA
EDP
NCT6104
LINE
OUT
MIC
REALTEK
ALC662
CODEC
HD Audio

WBOX-366x User Manual
7
Chapter 2
H/W Installation
This chapter explains the setup
procedures of the WBOX-366x
hardware , including instructions on
setting jumpers and connecting
peripherals, switches and indicators.
Be sure to read all safety precautions
before you begin the installation
procedure.

WBOX-366x User Manual
8
Mechanical
2.1.1Jumper and Connector Locations
Jumper and Connector Layout (Top Side)

WBOX-366x User Manual
9
Jumper and Connector Layout (Bottom Side)
Coastline Layout

WBOX-366x User Manual
10
2.1.2Board Dimensions
Board Dimension Layout _Top Side (unit: mm)

WBOX-366x User Manual
11
Board Dimension Layout _Bottom Side (unit: mm)

WBOX-366x User Manual
12
2.1.3CPU FAN Mechanical Dimensions

WBOX-366x User Manual
13
2.1 Jumpers
2.2.1Jumper Description
Board can be configured by setting jumpers. A jumper is a metal bridge used to
close an electric circuit. It consists of two metal pins and a small metal clip (often
protected by a plastic cover) that slides over the pins to connect them. To close a
jumper, you connect the pins with the clip. To open a jumper, you remove the clip.
Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you
would connect either pins 1 and 2, or 2 and 3.
The jumper settings are schematically depicted in this manual as follows.
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes.
Generally, you simply need a standard cable to make most connections.
Warning! To avoid damaging the computer, always turn off the power
supply before setting jumpers.
How to verify Pin1 of the jumper?
1. Please check the M/B carefully, where there is a mark of “1” or white thick line,
there is Pin1.
2. Look into the pad on the back side of the M/B, generally the square side of the
pad is Pin1.

WBOX-366x User Manual
14
2.2.2Jumper Setting
JSET1,3 Com1&Com2 RS232/485 Select
Part Number
Description Pin-Header 1x3 Pin 2.0mm DIP & Jumper 2.0mm
Setting
Function
(1-2)short
COM1,COM2 RS232 (Default)
(2-3)short
COM1,COM2 RS485
AT_ATX1 AT&ATX Power Mode Select
Part Number
Description Pin-Header 1x3Pin 2.0mmDIP&Jumper 2.0mm
Setting
Function
(1-2) short
ATX (Default)
(2-3) short
AT

WBOX-366x User Manual
15
AT power mode: Boot-up automatically when power-on
JCMOSClear/Keep CMOS Setting
Part Number
Description Pin-Header 1x3 Pin 2.0mm DIP & Jumper 2.0mm
Setting
Function
(1-2)short
Normal(Default)
(2-3)short
CLEAR CMOS
How to clear CMOS: (Must follow steps as below)
If any of these states happens: such as CMOS data corruption, administrator or
password of the BIOS forgotten, not able to boot-up due to wrong setting of the
CPU frequency in BIOS, or the CPU/Memory need to clear the CMOS setting, then
you can use this jumper to clear CMOS, and BIOS will reset to default settings.
• Pin1 and Pin2 short (default): Normal Condition;
• Pin2 and Pin3 short: Clear CMOS setting;
Clear CMOS setting and load default settings:
1. Turn-off the system power;
2. Use jumper to make Pin2 and Pin3 short circuit, waiting for 3-5sec, then place
the jumper back to Pin1 and Pin2
3. Turn-on the system power
4. If it is the wrong setting of CPU frequency in BIOS, then please press DEL to
enter BIOS setting menu once the system reboot.
5. Set the CPU operating speed to default value or a reasonable value;
6. Save & Exit the BIOS menu.