WholesaleCables 40U3-01000 User manual

USB 3.0 to SATA Enclosure
User’s Manual
1

Safety Instructions
Always read the safety instructions carefully.
Keep this User’s Manual for future reference.
Keep this equipment away from humidity.
If any of the following situation arises, get the equipment checked by a
service technician:
The equipment has been exposed to moisture.
The equipment has been dropped and damaged.
The equipment has obvious sign of breakage.
The equipment has not been working well or you cannot get it to work
according to the User’s Manual.
Copyright Statement
No part of this publication may be reproduced in any forms without the prior
written permission. Other trademarks or brand names mentioned herein are
trademarks or registered trademarks of their respective companies.
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and
shall in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other damage.
2

Table of Contents
1. Introduction .............................................................................................4
Features...................................................................................................4
Package Contents....................................................................................5
System Requirements..............................................................................5
LED Status...............................................................................................5
2. Installation ...............................................................................................6
A. Hare Drive Installation.........................................................................6
B. Verify Installation .................................................................................9
C. Removing the Enclosure...................................................................11
3. Specifications........................................................................................11
4. Regulatory Compliance ........................................................................12
FCC Conditions .....................................................................................12
CE..........................................................................................................12
WEEE Information…………………………………………………..…… …12
3

1.Introduction
The USB 3.0 to SATAenclosure is an ultra and durable USB 3.0 device for you
to connect hard drives of USB 3.0. It is a brand new solution to carry large
multimedia with 2.5’’ HDD enclosure. The enclosure is quality designed and
featuring unique appearance.
Features
Compliant with Super-Speed USB 3.0 specification.
Transfer rate of Super-Speed USB 3.0 interface can be up to
5 Gbps (Max).
Compliant with the SATA/SATA Ⅱ
Support 2.5’’ hard drives.
Plug & play.
4

Package Contents
USB 3.0 to SATA Enclosure x1
User’s Manual x1
System Requirements
WindowsXP, Windows Vista, Windows7
LED Status
Status Description
Green Lights up when power on.
Blue Blinking when there is data flow.
5

2.Installation
A. Hard Drive Installation
1. Unscrew and remove the case plates.
2. Unscrew the USB 3.0 to SATAboard from the case frame.
6

3. Connect the Hard Disk onto the USB 3.0 to SATA board.
4. Put and install the Hard Disk connected with USB 3.0 to SATAboard
onto the case frame. Make sure the connectors and LED indicators are
properly aligned with the case frame and secure the Hard Disk on the
case frame with screws.
7

5. Place the case plates back on the case frame and secure it with
screws.
8

B. Verify Installation
To verify your installation, right click My computer > Manage > Device
Manager> Universal Serial Bus controllers> USB Mass Storage Device.
On Windows7:
9

On Windows Vista:
On WindowsXP:
10

C. Removing the Enclosure
1. Close any windows and programs pertaining to the USB 3.0 to SATA
Enclosure.
2. Double click the“Safely Remove Hardware＂icon in the system tray
and select “Safely Remove USB Mass Storage Device＂.
(WindowsXP)
(Windows7)
3. Select the device you wish to remove and click on “Stop＂. The
system should prompt, “It is now safe to remove the USB device＂.
3. Specifications
Item Description
Data Rate Up to 5Gbps
Compliance USB 1.1, USB 2.0 & USB 3.0
Operating Systems WindowsXP, Windows Vista, Windows7
Max Distance 3 meters
Operating temperature 10 ~ 40∘C
Storage temperature -10 ~ 80∘C
Certificate FCC, CE.
*Specification is subject to change without further notice.
11

4. Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply with Part 15 of the FCC
Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received including interference
that may cause undesired operation.
CE
This equipment is in compliance with the requirements of the following
regulations: EN 55 022: CLASS B
WEEE Information
For EU (European Union) member users:
According to the WEEE (Waste electrical and electronic equipment) Directive,
do not dispose of this product as household waste or commercial waste.
Waste electrical and electronic equipment should be appropriately collected
and recycled as required by practices established for your country. For
information on recycling of this product, please contact your local authorities,
your household waste disposal service or the shop where you purchased the
product.
12