Timer Button
When the Timer button is pressed, the star projector will automatically turn off after 1 hour.You can
also modify the default timing setting (1 hour) in the Woohlab app.
Brightness Button
Adjust the brightness of pattern lights, laser lights and ambient lights.Three brightness levels are
available: 30% - 60% - 100%.
Timer Indicator
When the timer function is turned on, the timer indicator will light up.
Reset Hole
Insert a paperclip into the hole and press and hold the button for 5 seconds.The ambient light on
both sides will flash green 5 times and then illuminate green for 2-3 seconds before powering
down.This will restore the device to factory settings.
Replace the pattern drawer
Try changing the pattern for different projection effects.
Replace the pattern drawer
Right ambient light
Star Projector base
Pattern light
Left ambient light
Laser light
