Wow iQ 330 User manual

User manual
iQ 330 –Generation 22
Rugged Tablet PC M970D
2155-ENG / V-1.0-15/07/13

1
All Rights Reserved.
Copyright 2012
The information in this document is subject to change without prior notice
in order to improve reliability, design and function and does not represent
a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to
use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this
manual, the manufacturer and distributor assume no liability resulting from
errors or omissions in this manual, or from the use of the information
contained herein.

2
Content
Content ...................................................................................... 2
1IMPORTANT SAFETY INSTRUCTIONS .................................................................. 3
1.1 Caring for Your Tablet PC................................................................................. 4
1.2 Information on the Power Cord ......................................................................... 4
1.3 Battery Pack Safety ........................................................................................... 5
1.4 Regulatory Information CE ................................................................................ 6
FCC ........................................................................................... 6
2Getting Started ................................................................................................. 8
2.1 Connecting the AC Power ................................................................................. 8
2.2 Turning On and Off the Tablet PC..................................................................... 9
Turning on the Tablet PC............................................................. 9
Turning off the Tablet PC ............................................................ 9
2.3 Touring the Tablet PC ..................................................................................... 10
Front view................................................................................. 10
LED Indicator Status Description ................................................ 11
Right view ................................................................................. 11
Bottom view .............................................................................. 12
Top view ................................................................................... 13
Back view ................................................................................. 13
3Product Features and Specification .................................................................... 14
3.1 Product Features............................................................................................. 14
3.2 Product Specification....................................................................................... 15
System Specification .................................................................. 15
System Specification (continues)................................................. 16
4Operating Tablet PC and HotTab Hotkey Utility................................................... 17
4.1 Quick to Know Menu and HotTab Hotkey Function............................................ 17
4.1.1 How to use Menu Function................................................ 17
Menu Function Adjustment ........................................................ 17
4.1.2 How to use F1 (Hotkey) Function ....................................... 18
F1 (Hotkey) Function ................................................................. 18
Utilities Function........................................................................ 19
4.2 Wireless Network and Bluetooth ...................................................................... 21
4.2.1 Connecting to a Wireless Network .................................... 21
4.2.2 Using the Bluetooth Wireless Feature................................. 22
To establish a Bluetooth pairing: ............................................... 22
4.3 Using the Camera Feature .............................................................................. 23
5Tablet PC power mangaement.......................................................................... 24
5.1 About AC Adapter .......................................................................................... 24
5.2 Charging and Checking Charging Status ......................................................... 24
5.2.1 Charging the Battery Pack................................................. 24
5.2.2 Charging Approaches....................................................... 25
5.2.3 Checking the Battery Level ................................................ 25
5.2.4 Battery Low Signals and Actions ........................................ 26
6Troubleshooting.............................................................................................. 27
6.1 System recovery.............................................................................................. 27
7Contact ......................................................................................................... 29
1

3
IMPORTANT SAFETY INSTRUCTIONS
Please read these instructions carefully before using the product and
save for later reference.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Clean the
product with a damp soft cloth. Do not use liquid or aerosol
cleaners as it may cause permanent damage to the screen.
Do not use this product near water.
Do not place this product on an unstable cart, stand, or table. The
product may fall, causing serious damage to the product.
This product should be operated from the type of power indicated
on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
This product is equipped with a 3-wire grounding type plug, a plug
having a third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. (For AC version only)
Do not defeat the purpose of the grounding-type plug.
Do not allow anything to rest on the power cord. Do not locate this
product where persons will walk on the cord.
Never push objects of any kind into this product through cabinet
slots as they may touch dangerous voltage points or short out parts
that could result in a risk of fire or electric shock. Never spill liquid
of any kind on the product.
Do not attempt to service this product by yourself, as opening or
removing covers may expose you to dangerous voltage points or
other risks and will void the warranty. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
When the power cord or plug is damaged or frayed.
If liquid has been spilled into the product.
If rainy or water has been exposed to the product.

4
If the product does not operate normally that the operating
instructions are followed. Adjust only those controls that are covered
by the operating instructions since improper adjustment of other
controls may result in damage and will often require extensive work
by a qualified technician to restore the product to normal operation.
If the product has been dropped or the cabinet has been damaged.
If the product exhibited a distinct change in the performance, that
indicates a need for service.
1.1 Caring for Your Tablet PC
To avoid electrical shock or damage to the unit…
Disconnect power from the computer by unplugging the power cord
from the AC outlet (not by unplugging the power cord from the
computer).
Be sure not to clean the computer when it is plugged into a wall
socket.
When cleaning the unit, clean only with a damp soft cloth. Do not
pour liquid onto the unit.
Do not clean while the computer is “on” or plugged into a wall
socket.
Caution students to avoid using this device under wet conditions
and also to protect the unit when carrying under this condition.
Be sure the touch pad does not come into contact with dirt, liquids,
or grease.
Power connection must be removed before installing signal cables,
whenever it is functionally and legally allowed.
Power cords must be reconnected only after all signal
interconnections have been completed.
1.2 Information on the Power Cord
To reduce the risk of electric shock or damage to the equipment:
Plug the power cord into an AC outlet that is easily accessible at all times.
Disconnect power from the computer by unplugging the power cord from
the AC outlet (not by unplugging the power cord from the computer).
If provided with a 3-pin attachment plug on the power cord, plug the cord
into a grounded (earthed) 3-pin outlet. Do not disable the power cord

5
grounding pin, for example, by attaching a 2-pin adapter. The grounding
pin is an important safety feature.
Only the AC adapter provided with the computer should be used with the
computer
1.3 Battery Pack Safety
Keep the battery away from children.
The battery pack is intended to use only with this Tablet PC.
To reduce potential safety issues, only the battery provided with the
computer, a replacement battery provided by the supplier, or a compatible
battery purchased as an accessory from the supplier should be used with
the computer.
To reduce the risk of fire or burns, do not disassemble, crush, or puncture
a battery; short the external contacts on a battery; or dispose of a battery in
fire or water.
Do not expose a battery to temperatures above 60ºC (140ºF).
Handle a damaged or leaking battery with extreme care. If you come in
contact with the electrolyte, wash the exposed area with soap and water. If
it contacts the eye, flush the eye with water for 15 minutes and seek
medical attention.
Do not charge the battery pack if the ambient temperature exceeds 45°C
(113°F).
Do not expose the battery pack to low storage temperatures (below 0°C,
32°F).
To obtain a replacement battery, contact your local dealer.
When discarding a battery pack, contact your local waste disposal provider
regarding local restrictions on the disposal or recycling of batteries.
Use only supplied AC Adapter for charging .
CAUTION!
Danger of explosion if battery is incorrectly replaced. Only qualified
service technicians should replace and discard the battery pack.
Replace only with same or equivalent type recommended by the
manufacturer. Discard used batteries according to the manufacturer’s
instructions or local laws.

6
1.4 Identifikation
Manufactory: WinMate WinMate Communication INC.
9F, No.111-6, Shing-De Rd., San-Chung District, New
Taipei City 241,Taiwan, R.O.C.
Distributed: Würth Online World GmbH
Schliffenstr./Falkhof
74653 Künzelsau
Product: Rugged Tablet PC /iQ330
Model No.: M970D
1.5 Regulatory Information CE
European Notice
This product with the CE marking comply with the published by the
European Community Directive
EUROPEAN COUNCIL DIRECTIVE 2004/108/EC
Compliance with these directives implies conformity to the following
European Norms:
EN 55022:2010 (Class B)
EN 55024 : 2010
AS/NZS CISPR 22:2009 (Class B)
EN 61000-3-2 : 2006/A1:2009/A2:2009
EN 61000-3-3 : 2008
IEC 61000-4-2 : 2008
IEC 61000-4-3 : 2010
IEC 61000-4-4 : 2010
IEC 61000-4-5 : 2005
IEC 61000-4-6 : 2008
IEC 61000-4-8 : 2009
IEC 61000-4-11 : 2004
FCC
And, in accordance to the following Applicable Procedures Applicable to
ANSI C63.4 –2009
(The Information Technology Equipment)

7
That this product has been assessed against the following Applicable
Standards CISPR PUB. 22, FCC Part 15 Subpart B and Canada ICES-003
Issue 4
CERPASS hereby acknowledges that:
The measurements shown in this test report may issue a DECLARATION of
CONFORMITY and apply the FCC mark in accordance to U. S. A. Rules.

8
2Getting Started
This chapter guides you to get the Rugged Tablet PC ready for operating.
2.1 Connecting the AC Power
Our tablet PC can operate either on the external AC power adapter or
internal battery power. It is suggested that you use AC power when you
start up the tablet PC first time.
CAUTION
Use only the AC adapter included with your tablet PC. Using other AC
adapters may damage the tablet PC.
1. Plug the DC cord of the AC adapter to the power connector (1) of the
tablet PC.
2. Plug the female end of the AC power cord to the AC adapter and the
male end to the power electrical outlet.
3. When the AC adapter is connected, the Battery Pack is also under
charging. You can check the Battery Status LED indicator to see the
currently progress. The indicator turns to green when is fully charged.
1

9
2.2 Turning On and Off the Tablet PC
Turning on the Tablet PC
1. 1. Place your tablet PC on a flat and stable surface or holding the
tablet PC on your hand.
2. Make sure that the tablet PC is either connected to AC power or the
battery pack with power.
3. Press the power button (1) on the right side by 3 seconds to start it.
Turning off the Tablet PC
#
Stop mode
How to do
Start or Resume
again
1
Power Off
Following the shutdown process during
operating system. The standard process
can prevent unsave data loss or damage
your software programs.
2
Sleep (S3)
Under normal operating system, Push the
Power Button 0.5 second to go to sleep
mode. (push again to wake up the unit)
CAUTION
If you have to turn the tablet PC on again immediately after turning it
off, wait for at least five seconds. Turning the tablet PC off and on
rapidly can damage it.
1

10
2.3 Touring the Tablet PC
This section we will show the Tablet PC external connection parts and their
functions.
Front view
1.
LCD display
Contents of the current system operation are displayed
here.
2.
LED status indicators
From right to left shows the status about Power mode,
Battery mode, Storage and WiFi status mode.
1
2

11
LED Indicator Status Description
LED Term
Power mode
Battery Status
Storage
Status
Wi-Fi Status
LED Indicator
Indicator
Status
Description
Blue light：
when Power On.
No light when
Power Off.
Orange Light：
Under charging
Red Light：
Low Battery
Green light：
when storage
under
operation.
No light when
storage stop
operation.
Green light：
when Wi-Fi
under operation.
No light when
Wi-Fi stop
operation.
Right view
1
SIM card slot
To insert the SIM card
2
Power Button
Press 3 seconds continuous to turn-on the PC.
Press to force shutdown the PC
2
1

12
Bottom view
1
Docking Connector
Connect to the optional docking
2
USB 2.0 port
Standard USB2.0 port
3
LAN/HDMI
LAN & HDMI Out combo connecter. Connect with the LAN &
optional HDMI cable.
4
Mic-in/Line-Out
Mic-in for microphone. Line-Out for the external speaker or
handset.
5
DC Power Jack
DC 12V in Power
5
3
1
2
4

13
Top view
1
Menü
Quick to Know Menu
2
Hotkey (F1)
Programmable Hot-key for user to define by application
3
Vol +
volume up
4
Vol. -
volume down
Back view
1.
Camera
Camera for pictures and videos
2.
Threaded hole
Attachment for the hand trap
1
2
1
2
3
4

14
3Product Features and Specification
3.1 Product Features
Our Rugged Tablet PCs are designed with state of the art industrial use,
versatile functionality and solid products. With great mobility support and
battery management. The 9.7” rugged tablet provides an alternative
solution for those between general consumer and extremely rugged
application.
9.7” 1024x768 Resolution IPS LED Panel
Low-power system with Intel® Atom N2600 processor
2GB SODIMM DDR3-800 memory
Built-in Wi-Fi/ Bluetooth Module
Support 3G&GPS function (optional)
Standard Battery 5300 mAh
Mobile Rugged- Shock, Vibration, and transit drop
4 points Projective-capacity touch

15
3.2 Product Specification
The product specification as the following table description:
System Specification
System
Processor
Intel® Atom N2600 Dual core 1.6GHz
BIOS
AMI System BIOS
System Chipset
Intel® NM10 Chipset
System Memory
2GB SODIMM DDR3-800
LAN Controller
Realtek RTL811B GigaLAN Controller
Storage
mSATA SSD
Audio
Audio out for headset, Micro-in for microphone jack, 1.0W
Speaker x2 (Internal)
I/O Connectors
Bottom I/O Port
Docking Connector x1, Standard USB2.0 port x1, LAN &
HDMI Out combo connecter x1, Mic-in/Line-Out x1, DC
jack x1
Right I/O Port
SIM card slot x1,
Upper side button
Volume up x1, Volume down x1, Hotkey(F1) x1 , Menu key
x1
In Front Control
LED indicator
From right to left shows the status about Power mode,
Battery mode, Storage and WiFi status mode
Display Specification
Size
9.7 inch
Resolution
1024x768 pixels
Touch
Projective Capacitive (4 points)

16
System Specification (continues)
Mechanical and Environment
Weight
988g (w/o accessories)
Operating Temperature
0 deg.C to 50 deg.C
Operating Humidity
30% to 90% (non condensing）
IP Proof
IP54
Mounting
Optional docking / Optional VESA Kit
Shock
Rugged mobile-shock
Vibration
Rugged mobile-vibration
Drop*
4 feets
Certifications
CE, FCC, CCC
Power Management
Power Input
12V DC
Battery
Standard battery 5300mAh
Operating time
5 Hours
Adapter
100-240V AC in , 50-60Hz, 12VDC output
Wireless Communication
WLAN
built-in 802.11b/g/n
Bluetooth
built-in Bluetooth
3G
Optional built-in 3G Module
GPS
Optional built-in GPS Module

17
4Operating Tablet PC and HotTab Hotkey
Utility
4.1 Quick to Know Menu and HotTab Hotkey Function
This section will introduce you about our easy-of-use function buttons. Our
Tablet PC function buttons support very easy way and useful function to
adjust Brightness, Volume and watch Battery current status. For
programmable Hotkey function can also be defined by user to control by
their common use application.
4.1.1 How to use Menu Function
Menu Function Adjustment
#
Action
Function Description
Funtion Adjustment
1
Push “Menu”
button
1st Time
Show Current Brightness
Click “Vol+” button
to increase
brightness (Or Drag
by Touch)
Click ”Vol-” to
decrease
brightness(Or
Drag by Touch)
2
Push “Menu”
button
2nd Time
Show current Volume
Click “Vol+” button
to increase
volume(Or Drag by
Touch)
Click ” Vol-” to
decrease
volume(Or Drag
by Touch)
3
Push “Menu”
button
3rd Time
Show current Battery
status
4
Push “Menu”
button
4th Time
Show current on/off of Wireless\ Bluetooth
\ Camera and 3G\GPS mode.
WiFi on/off
Bluetooth on/off
Camera on/off
3G on/off (Optional)
GPS on/off (Optional)
5
Push “Menu”
button
5th Time
Show the system
You can see the following:
HotTab version
Project ID

18
information
BIOS version
EC version
4.1.2 How to use F1 (Hotkey) Function
F1 (Hotkey) Function
Use the HotTab software utility to make it easy to program and define hot
key by customer’s usual application.
Long press (3~4 seconds) the “F1”
button on the top of your M970D and
you can see the utilities menu at center
of desktop.
Then touch the “F1 Short” button.
Choose one software application as
your hotkey function. After that, the
software application which you set will
open immediately when you short press
“F1” button.
The Hotkey software program is the
programmable application software for
the Hotkey; we choose some usual
applied function for default setup. For example, user can choose his own
application program very easy by setting up the function from the setup
window.