XCEL 7958-NPF User manual

1
ORNAMENTAL FENCE INSTALLATION GUIDE
3 Rails, Spear Top/Flat Bottom
Model No. 7958-NPF
Item Description
Fence installation and assembly has never been so easy to install until now. Our non-welded component
fence panel system allows you to assemble a fence panel in a matter of minutes. No welding needed, and
our knocked down packaging allows you to install a fence panel at the job site with ease. Built from strong
wrought iron, pre-galvanized inside and out, double-powder coated, black.
Features
3 Rails, Spear Top/Flat Bottom - Aspen Style
Panel
Package Size: 78-7/8”L x 5-3/4”W x 3-7/8”H
Fence Panel Size: 60”H x 76”W
Easy Patented Design allows for DIY Assembly
with Ease
No Welding or Painting Required (Snap together
Concept/Powder Coated Black)
On-site assembly
Zero Maintenance
Easily Transported/Compact Box
Fence in a "Box"
INSTALLATION VIDEO AVAILABLE AT: youtu.be/cAfTlfTeBh0

- 2 -
Please read these instructions carefully before installing your XCEL Fence. If you have any questions or
issues installing the fence, please contact us at 866-392-0808 for assistance.
Before You Begin …
Check your local zoning laws.
Local zoning laws and HOA may regulate the
location, type and height of your fence.
If needed, contact local utility companies for
assistance in clearing electrical, gas or water
lines to avoid hitting any unseen
underground utilities.
Sketch Plan and confirm materials
Draw and sketch out your fence plan. Plan
the location of corners and gates.
Measure accurately with tape measure and
identify all measurements on your drawing.
Make sure all location of fence lines and
gates are carefully planned.
Determine total number of sections and
posts needed.
Installation Tips
Fence panels should be installed so that the bottom of the fence is 2” above the ground level to allow
for lawn maintenance/cutting.
Once installed, the top of the post will be at the same height as the top of the tallest part of the fence
panel.
Please Follow Measurements Below
Rings Placement
Sold Separate

3
Package Contents
1 pc. 6.5' Post (Soil Use) or Cut to 5’ for Concrete Use
1 pc. Top Rail
1 pc. Middle Rail
1 pc. Bottom Rail
16 pcs. Pickets
6 pcs. Flat Mount Brackets
18 pcs. Tek Screws
4 pcs. Anchor Bolts
1 pc. Flange & Flange Cover (Concrete Use)
1 pc. Installation Instructions Manual
18
ATTENTION:
PLEASE MAKE SURE ALL CONTENTS ARE IN
THE FENCE KIT.
DO NOT ATTEMPT TO ASSEMBLE THE FENCE IF
PARTS ARE MISSING OR DAMAGED.
Please do not return the product to the store,
for assistance or replacement parts call:
866-392-0808
Pickets
Sleeve
Screws
Closed Rail
Thru Rails
6pcs Brackets
4pcs Anchor Bolts

4
Required Tools & Materials for Assembly
Power/Hammer Drill
Tape Measure
String & Stakes
Level
Post Hole Digger
Concrete Mix
Socket & Wrench
Hacksaw
Product Overview
Gate Sold Separately
Brackets

5
Layout Installation
Using the image as a guide, establish your fence line by staking out the areas you wish to enclose.
Mark every 6.5’ section to identify location of the posts.
NOTE: If you are left with a space less than a full size panel, the rails can be cut down to fit the space by
using a hacksaw.
Attach string to each stake
NOTE: Make sure all posts are set to have an opening
of 76-1/2” wide.
Be sure all posts are leveled.
Prior to fence panel installation, make sure concrete is
set and dry to avoid shifting of the posts.
Sketch out your fence plan to paper.
Show the house, driveway, deck, and
property lines in your diagram to
estimate materials and location of your
fence.
Measure accurately with tape measure
and identify those on your sketch.
Fence Panel

6
Fence Panel Assembly (on flat surface)
1. Locate top rail, middle rail, and bottom rail and begin to insert pickets thru top and middle rails
2. Place rails on the floor, facing up and begin inserting pickets
a. Make sure the Spear Top (Spears) Pickets are facing you
b. Continue to insert pickets into bottom rail
3. Adjust top rail to clip onto picket holes
4. Insert individual pickets into the rail holes, and make sure pickets are secured
5. Align the middle rail 4” below the top rail
6. Panel assembly is now complete
1.Insert pickets into top and middle rail
2.Continue to insert pickets into bottom rail
3.Adjust top rail to align with picket holes
4.Continue to insert pickets until all pickets are secured
5.Align the middle rail 4” below the top rail
6.Installation completed
Thru Rails
Closed Rails

7
Soil Installation Instructions (At Job Site)
1. Set posts (dig hole 18” deep)
2. Attach brackets on one side of the post with included tek screws
Measure 5-3/8” from the top of the post and attach Bracket
Measure 1-7/8” from first Bracket to set the second Bracket
Measure 2” from the bottom of the ground to set the bottom Bracket
3. Insert top rail into the bracket. Slide bracket onto opposite side of the rail
(Repeat steps for middle and bottom rails)
4. Secure brackets with tek screws
5. Insert pickets through the rails, and make sure pickets are secured into rails
6. Installation is now complete
1.Dig hole 18” deep and fill hole
with concrete and wait for
concrete mix to set
2.Attach brackets to one side of
the post
3.Insert top rail to already installed
bracket, slide bracket onto rail for
bracket installation on opposite
side. Repeat for middle and bottom
rails
4.Secure Rails to Bracket with tek
screws provided.
5.Slide pickets into rail holes
starting from left to right
6.Fence panel installation is
complete

8
Concrete Floor Installation Instructions (At Job Site)
1. Use included Flange to drill holes on concrete floor. Hammer in anchor bolts to secure Flange.
2. Attach brackets to one side of the post, starting from the top
Make sure post is cut to 5’ long and insert/secure onto Flange with tek screws
Measure 5-3/8” for top bracket, then 1-7/8” for middle bracket, then 41-7/8” for bottom bracket
3. Insert top rail into the bracket. Slide bracket onto opposite side of the rail
(Repeat steps for middle and bottom rails)
4. Secure brackets with tek screws
5. Insert pickets through the rails, and make sure pickets are secured into rails
6. Installation is now complete
1.Use included Flange to drill holes
on concrete floor. Drill bit is 15/32”
in size. Hammer in anchor bolts to
secure Flange in place. (Use 3/8” bit
and drill slightly larger)
2.Attach brackets to one side of the
post, starting from the top.
Measure 5-3/8” for top bracket,
then 1-7/8” for middle bracket, then
41-7/8” for bottom bracket.
3.Insert top rail to already installed
bracket, slide bracket onto rail for
bracket installation on opposite
side. Repeat for middle and bottom
rails
4.Secure Rails to Bracket with tek
screws provided.
5.Slide pickets into rail holes
starting from left to right
6.Fence panel installation is
complete