XPOtool 62948 User manual

User’s manual
Universal Kayak Holder
62948
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.

https://www.XPOtool.com Item 62948 Page 2
The Tool Experts
05 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.XPOtool.com Item 62948 Page 3
The Tool Experts
05 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
•The steel cable cannot prevent that your kayak might be stolen.
•Do not allow children to play inside, on, or around the support.
•Any incorrect mounting and/or use of the support may lead to serious injuries and/or death.
•Do not exceed the maximum charge capacity of 80 kg.
•When mounting the support to a concrete wall, you must check first that the wall has enough
stability to do so. Any wall not having sufficient stability can lead the screws to tear off and the
kayak to fall.
•Any incorrect mounting can lead to damages or injuries.
Scope of delivery
Name
Qty.
Stainless-steel support
2
Hexagon tension screw (M6×50)
8
Flat washer
10
Plastic anchor
10
Steel cable
1
Tools needed for mounting (not included)
•Lock
•Measuring tape
•Screwdriver
•Electric drill machine
•5mm (3⁄16″) drill
•Percussion drill, 8 mm (5⁄16″) drill (for concrete walls)
Notes!
•If mounting the support to a thick drywall or wall plaster, you might must buy longer screws.
•If mounting the support to a drywall, it is enough to screw the screws in by hand.

https://www.XPOtool.com Item 62948 Page 4
The Tool Experts
05 2022-1
Assembly
1. With a measuring tape, determine the height and distance of the supports as well as the dis-
tance of the screws.
2. The supports are mounted to between 35 % and 45 % of the length of your kayak.
3. Do not mount the supports on a height that you cannot reach. Make sure that both supports are
level.
4. With an electric drill machine, drill pilot holes for the screws with a 5 mm (3⁄16″) drill.
Note! Drill pilot holes for the plastic rawlplugs with a percussion drill and an 8 mm (5⁄16″) drill
when mounting the device to a concrete wall.
5. Insert the screws into the pilot holes through the holes of the support. Tighten the screws with
a screwdriver. Do not tighten the upper screw entirely, first insert the lower screw. Then tighten
both screws.
Use
1. Lift your kayak into the support.
2. Guide the steel cable through the kayak. Place the cable so that either end reaches the locking
holes.
3. Lock either end of the cable and the locking holes with each other.
Important note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.