Xylem YSI Nile MB User manual

MOUNTING INSTRUCTIONS
NILE RADAR MOUNTING BRACKET
What’s In The Box
1
Thank you for purchasing the new WaterLOG Nile radar level sensor! These are the mounting
instructions for the Nile Radar Mounting Bracket. For more detailed information regarding the Nile
radar sensor visit www.waterlog.com/nile. Please contact us at any time with your comments and
feedback about our products and services. We truly value your input.
Standard Items Quantity
Pole Bracket 1
Radar Bracket 1
2 in. U-bolt 1
2.5 in. U-bolt 1
Silicone O-Rings 2
5/16-18 x 3/4 in. Carriage Bolts 2
5/16 in. Washers 2
5/16-18 Locking Nuts 2
Please contact YSI customer service immediately if any
expected items listed are not in the box.
Nile Radar Sensor Mounting Bracket Kit
1
Note: This bracket has been designed for use with either horizontal or vertical mounting poles of
either 2 or 2.5 inches in diameter. Instructions for assembly in either configuration are the same,
with the orientation of the brackets being the only difference as shown in the images below.
Nile Mounting Bracket Horizontal Nile Mounting Bracket Vertical
Item # Nile MB

Insert Wire Routing Nuts
4
Insert both Wire Routing Nuts through the appro-
priate holes in the mounting bracket and install 1
supplied o-ring on each of the Wire Routing Nuts as
shown.
Remove Retaining Bracket
2
Begin by removing the Wire nut retaining bracket
and the 2 Wire Routing Nuts from the radar body.
(Be sure that the Attached o-rings stay in place on
the Wire Routing Notes as shown).
Note: Any wires that have been routed through the
wire nuts and connected to electronics within the
radar body will have to be disconnected and re-
moved until installation of the bracket is completed.
Remove Wire Nut Retaining Bracket and the two Wire
Routing Nuts
Decide On Mounting Pole
3
Determine whether you will be mounting the radar on a vertical pole or an horizontal pole.
Align the Radar bracket accordingly as shown below.
Nile Mounting Bracket Horizontal Alignment Nile Mounting Bracket Vertical Alignment
Insert Wire Routing Nuts
2

Reinstall Wire Routing Nuts
Reinstall Wire Routing Nuts
5
Reinstall the Wire Routing Nuts into the Radar Body
and tighten until the bracket plate is secure. (Pay
special attention to not deform the silicone O-rings
through over tightening so as to retain the water
resistant qualities of the radar.)
Mount Pole Bracket To Bracket Plate
6
Mount the Pole Bracket to the Bracket Plate using
the supplied Carriage Bolts, Washers, and Lock
Nuts as shown. (Leave locking nuts slightly loose so
as to allow for final radar alignment)
Mount On Pole
7
Choose appropriate u-bolt based on diameter of
mounting pole. Mount radar and bracket on pole
and align radar unit for optimal radar function.
Tighten lock nuts to secure Mounting bracket.
Mount Pole Bracket to Flange Plate
Mount Radar and Bracket on Pole, and Align the Radar
Unit for Optimal Radar Function
3

Item # 361567 dwg# 361567 July 2015
©2015 WaterLOG +1.435.753.2212 [email protected] www.waterlog.com
Xylem—YSI
1700/1725 Brannum Lane
Yellow Springs, Ohio, 45387, USA
Request a Quote
Tel: [phone]
Email: [email protected]
Internet: www.waterlog.com
Place an Order
Tel: [phone]
Email: [email protected]
Customer Support
Tel: [phone]
YSI is a trademark of Xylem Inc.
© 2015 Xylem Inc. D62 0715
1) The tissue in plants that brings water upward from the roots;
2) a leading global water technology company.
We’re 12,000 people unified in a common purpose: creating innovative solutions
to meet our world’s water needs. Developing new technologies that will improve
the way water is used, conserved, and re-used in the future is central to our work.
We move, treat, analyze, and return water to the environment, and we help people
use water efficiently, in their homes, buildings, factories and farms. In more than
150 countries, we have strong, long-standing relationships with customers who
know us for our powerful combination of leading product brands and applications
expertise, backed by a legacy of innovation.
For more information on how Xylem can help you, go to www.xyleminc.com
Xylem