3B Technology LT3032A01 Setup guide

On- Screen Display Menus PC Display Closed Caption ViChip
Before operating the unit,
please read this manual
thotoughtly and retain it
for future reference
In
In
ner's
ner'
wner
wn
n
n

Before operating the unit,
please read this manual
thotoughtly and retain it
for future reference
Owner's Instruction ManualOwner's Instruction Manual

Safety Instruction
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning:
To reduce the risk of electric shock do not remove cover(or Back)..
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of insinuated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operation and
maintenance (servicing) instructions in the literature accompanying
the appliance.
Warning:
To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not
rub or strike the Active Matrix LCD with anything hard as this may scratch, mar,
or damage the Active Matrix LCD permanently.
TM/VM-1210, TM/VM-1510, TM/VM-1512 : LT15A01 LT2627(E) LT3032(E)
01
Caution:
Do not attempt to modify this product in any way without written authorization.
Read and keep these Instruction manual
Heed all warnings and follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heats.
This TV is not completely disconnected from a power supply line, as minute current is consumed
even when the POWER switch is turned off.
Do not place hot objects or naked flame sources, such as lighted candles or nightlights on, or close
to the TV. High temperatures can melt plastic and lead to fires.
Do not set on top of the TV. Any object or container that might spill liquids or small objects into the TV.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles,
and the point where it exits the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury form tip-over.
Unplug this apparatus during lighting storms or when unused for long periods of time.
Refer all servicing to qualified service personnel., Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
has fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Safety Instruction
LCD DISPLAY
LCD DIS PLAY

02
Installation
Installation
Warning:
To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
Service
Never remove the back cover of the unit, this can expose you to high voltage and other hazards.
If the unit does not operate properly, unplug it and call your dealer.
Antenna connect the antenna cable to the connection marked Ant. (on the rear).
For best reception, use an outdoor antenna.
Location
Position your unit so that no bright light or sunlight will shine directly on the screen.
Do not expose the unit to vibration, moisture, dust or heat. Also ensure that the unit
is placed in a position that allows a free flow of air. Do not cover the ventilation
openings on the back cover. You can install the unit on a wall or place it on a table-top
or similar flat surface. Mounted the unit securely to eliminate the risk of injury from
the unit falling. Contact your dealers to purchase the optional ceiling mount.
Cleaning
Unplug the unit before cleaning the face or the LCD Screen. Dust the unit by wiping
the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning
use a clean, damp cloth. Do not use liquid or aerosol cleaners.
Power:
This set operates on an AC main supply, the voltage is as indicated on the label on the
back cover.
Never apply any DC power to the set directly. Connect the power cord to an AC mains.
In the event of thunderstorms or power cuts, please pill out the mains and aerial plug of
the set.
Do not allow anything to rest upon or roll over the power cord, and do not place the set
where the power cord is subject to damage.
LCD DISPLAYLCD DIS PLAY

Contents
03
Contents
Page
LCD DISPLAY
LCD DIS PLAY
Safety
Bacic
Operation
Power ON/OFF
Info
TV
Picture
Window
Sound
Function
Spec
01
02
04
05-07
08
09
10
11
12
13
14
15
16
17
18
19
20
21-22
23
24
24-26
27-28
28-29
Safety Instruction
Installation
The Front Panel
Viewing the Connection of Back Panel
Viewing the Connection of External equipments
Watching DTV
Remote Control Handset
Inserting the Batteries in the Remote Control
Viewing and Selecting an Input source from External sources
Switching On and Off (LED light: Red & Green)
Displaying Information
Use of OSD(On Screen Display) menu
Storing Channels Automatically
Storing Channels Manually
Storing Channels Fine Tuning
Viewing Closed Captions
Set up Restrictions Using the TV Guidelines
Set up Restrictions Using the MPAA Ratings
Changing the Picture Standard
Setting the Window
Changing the Sound Standard
Function
Features of Product
Overview Specification
Supported Timings(* TBD)
Troubleshooting

The Front Panel
04
The Front Panel
1
2
3
4
5
6
1 2 3 4 5 7
7
6
[Power Key ] Power On/Off your set
[MENU Key] Press the MENU button, the OSD (On Screen Display ) Menu will be displayed
on screen.
[EXIT/Source Key : ] During OSD operation, return to the normal viewing Or return to the
previous menu.
: Use it as the Source Key if there is no menu on the screen
(Ex: TV -> PC -> DVI -> DTV -> DVD -> Video -> S-Video
[Left/Right Key ▶/ ◀ ] Volume Buttons
During OSD operation, adjust certain sub menu or setting value.
When you select ▶/ ◀ , it is "Enter " function
Decrease or Increases the level of audio volume and the volume of the
selected function
[Up/Down Key ▼, ▲] Channel Buttons
Decreases or Increases the channel number.
Or make a curser move to the item you want to adjust during
OSD operation.
: Auto Configulation on PC mode : Hotkey
[Power Indicator ] LED Light (2 Colors : red, green )
Light up when you turn the Power Off
Red Light shows in Stand by mode, Green light shows in Power-On mode.
Remote control Sensor

Viewing the Connection of Back Panel (Over 26 inch)
05
Whenever you connect an audio or video system to your set, ensure that all elements
are swiched off. Refer to the documentation supplied with your equipment
for detailed connection instrctions and associated safety precautions.
Viewing the Connection of Back Panel
2
2
3
4
6
4
DTV/DVD
DVI
S-Video
PC
Composite Video
Component Inputs
PC AMP
AC Power
1
TV ANT.
5

06
Viewing the Connection of Back Panel
Viewing the Connection of Back Panel (22, 23 inch)
Whenever you connect an audio or video system to your set, ensure that all elements
are swiched off. Refer to the documentation supplied with your equipment
for detailed connection instrctions and associated safety precautions.
2
2
3
4
6
4
DTV/DVD
DVI
S-Video
PC
Composite Video
Component Inputs
PC AMP
1
TV ANT.
5

07
Viewing the Connection of Back Panel
Viewing the Connection of Back Panel (Under 20 inch)
Whenever you connect an audio or video system to your set, ensure that all elements
are swiched off. Refer to the documentation supplied with your equipment
for detailed connection instrctions and associated safety precautions.
2
2
3
4
6
4
DTV/DVD
DVI
S-Video
PC
Video
Component Inputs
PC
1
TV ANT
5
Video/S-Video
DC IN
Headphone VideoAudio
Output
AMP