Eagle Signal A103-006 User manual

1
Introduction
Within the Danaher Controls A103 family you'll find a product to meet nearly every
requirement for panel mounted control and indication. Housed in a DIN standard 36mm x
72mm case, the A103-006 is designed to accumualate elapsed time for applications such as
machine maintenance. The unit is field programmable to display the elapsed time in a
variety of units.
The supertwist LCD display with 6 digit display, plus time unit legend, provides easy viewing
at a glance. For conditions where ambient light is poor, the display can be backlit by
connecting an external DC (10-28 Volt) power supply. The time value can either be reset
through the front panel or via a remote signal.
Powered by either one or two replaceable 3V Lithium batteries, this unique design allows for
a new battery to be installed before removing the old one, thereby retaining count total and
program data. A low battery indicator appears on the screen to provide a warning several
weeks before the end of battery life. If two batteries are used simultaneously, the individual
expected life doubles to 10 years.
Setup is quick and simple as the two
front panel keys are used to scroll
through 2 menu choices. A NEMA 4X
front panel and noise immunity
tested to IEC 801 level 3 makes this
unit suitable for harsh environments.
Several option modules are also
available that provide added
functionality and convenience.
• Large, easy to read 6-digit supertwist LCD
display with backlighting capability
• 3 Volt lithium battery provides long life
and eliminates the need for external power
• Elapsed time resettable remotely or from
the front panel (if enanbled)
• Field programmable time units: Seconds,
Minutes, Hours, Hours:Minutes:Seconds
• Option Modules provide added
functionality and convenience
• Simple menu-driven setup
• NEMA 4X rated front panel for use in
washdown environments
Features Index
Overview
Operation page 2
Terminal Connections page 2
Setup
Installation page 3
Programming page 3
General
Specifications page 4
Warranty page 4
Technical Manual
701954-0007
A103-006
Elapsed Time
Indicator
Eagle Signal brand

2
OVERVIEW
1. Time Display: Accumulates time when the timing start input is
active. Timing will not take place when the external or front panel
reset is active. The leftmost digit is the time value legend.
2. Down Key: When the program input is active this key is used to
scroll through the menu items. After a menu item has been chosen for
editing, the down key is used to set the value for the currently selected
(flashing) digit.
REAR TERMINAL CONNECTIONS
OPERATION
5. Front Panel Program Enable - Allows access to
program mode when tied to common
6. Not Used
7. Not Used
8. DC Supply Input - For backlighting
1. Common
2. Not Used
3. Timing Enable - NPN or dry
contact inputs
4. Remote Reset - Resets time value
when tied to common
VEEDER-ROOT
3. Next/Reset Key: Resets the accumulated time if Front Panel Reset
is enabled in Programming Mode. When the program input is active
this key is used to select a menu item for editing (left most digit will
begin to flash) and then move to the desired digit to be changed.
R
1. Time Display 3. Next/Reset Key
345678S
2. Down Key
EAGLE SIGNAL
5
6
7
8
4
3
2
1
+
-
10 - 28 VDC

3
-
BATT +
+ BATT -
68mm
72mm
8
7
6
5
4
3
2
1
33mm
36mm
Battery Slots
Front Panel Installation - Place the unit in the panel through the
33mm x 68mm cutout. Slide the included gasket over the rear of the
unit, then slide the panel mount bracket into place so that the 4 tabs
catch in the groves on the top and the bottom of the unit (the bracket
should be oriented so that the tabs are on the side nearest the panel).
Use the provided panel mount screws to tighten the bracket until there
is a secure seal against the gasket.
Battery Installation - The unit is shipped with one battery, which is not
installed. Remove the battery cover by pushing inward and down. Install
the battery in either of the two slots. The unit runs on a single battery,
and the second slot is provided to allow for installing a new battery before
removing the old one, retaining count total and program data. The unit
can also be run on two batteries to extend the battery life to 10 years.
Once the battery is in place the unit will go into a self test mode, and all
the segments on the LCD display will be illuminated. The self test mode
is exited by depressing the Next key, which will then display the model
number (6). Depress the Next key again to ready the unit for operation.
INSTALLATION
SETUP
Note: On initial start-up, as well as after any programming changes,
it is necessary to reset the unit before begining operation
on
______
S.
Front Panel Reset Enable: When active (ON) the time value, when being displayed, can be reset by
pressing the Next/Reset key. If set to OFF, the time value can only be reset through the remote input.
Time Format: Sets the units in which the elapsed time will be accumulated. Use the next key to scroll
through the available choices: Seconds, Minutes (_ _ _ _ _ . _), Hours (_ _ _ _ _ . _) , Hours: Minutes:
Seconds.
PROGRAMMING
Programming parameters can be accessed, when the Program Enable input is active, by
pressing the Down key. To edit a parameter use the Down key to scroll until the
desired parameter appears on the screen. Pressing the Next key will cause the leftmost
digit of that value to begin to flash. Use the Next and Down keys in combination to
choose individual digits and change their value.
1.

4
SPECIFICATIONS
Timing Start Input (Terminal 3):
Type: NPN Signal or contact-closure
Count Speed: 30 Hz max (50% duty cycle)
Logic: Low < 1.0 VDC, High > 2.0 VDC
Minimum Pulse Width: 12 ms
Maximum Input 28VDC
Front Panel Enable Input (Terminal 5)
Type: NPN Signal, Contact Closure; level sensitive
Maximum Input: 28 VDC
Remote Reset Input (Terminal 4)
Type: NPN Signal, Contact Closure; level sensitive
Frequency Response: 30 Hz (50% duty cycle)
Maximum input: 28 VDC
Power Source:
Type: Single or dual 3V Lithium battery
Expected Life: 5 years typical-single battery, 10
years typical-dual batteries
Low Power Indicator: "Low Bat" flashes on display
approx. 2 weeks prior to end of battery life
Display:
Type: Supertwist LCD for use with or without
backlighting
Number: 6 digits plus time unit legend
Height: 12mm
Backlighting: Green Illumination over whole
viewable area with a 10 to 28 VDC supply (Terminal 8)
Physical:
Dimensions: 36mm x 72mm, 38mm deep
Mounting: Panel Mount (mounting bracket supplied)
33mm x 68mm (+ 0.3mm) panel cutout
Connections: Up to 8 screw terminals
Weight: Approximately 2.25 ounces
WARRANTY
1675 N. Delany Road
Gurnee, IL 60031–1282
Phone: [phone]
Fax: [phone]
Danaher Controls
Standard products manufactured by the
Company are warranted to be free from defects
in workmanship and material for a period of one
year from the date of shipment, and products
which are defective in workmanship or material
will be repaired or replaced, at the option of the
Company, at no charge to the Buyer. Final
determination as to whether a product is
actually defective rests with the Company. The
obligation of the Company hereunder shall be
limited solely to repair and replacement of
products that fall within the foregoing
limitations, and shall be conditioned upon
receipt by the Company of written notice of any
alleged defects or deficiency promptly after
discovery within the warranty period, and in the
case of components or units purchased by the
Company, the obligation of the Company shall
not exceed the settlement that the Company is
able to obtain from the supplier thereof. No
products shall be returned to the Company
without its prior consent. Products which the
Company consents to have returned shall be
shipped F.O.B. the Company's factory. The
Company cannot assume responsibility or accept
invoices for unauthorized repairs to its
components, even though defective. The life of
the products of the Company depends, to a large
extent, upon the type of usage thereof, and THE
COMPANY MAKES NO WARRANTY AS TO
FITNESS OF ITS PRODUCTS FOR SPECIFIC
APPLICATIONS BY THE BUYER NOR AS TO
PERIOD OF SERVICE UNLESS THE COMPANY
SPECIFICALLY AGREES OTHERWISE IN
WRITING AFTER THE PROPOSED USAGE HAS
BEEN MADE KNOWN TO IT.
THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO ANY WARRANTY OF
MERCHANTABILITY OR OF FITNESS FOR A
PARTICULAR PURPOSE.
GENERAL
Printed in U.S.A.
#701954-0007
Revision A
7/1/96