A&L Furniture Lighthouse User manual

Assembly Instructions
Lighthouse
Thank you for choosing Furniture Co.
We hope that this piece brings you many years of enjoyment!
For help with assembling your furniture,
or if you have missing hardware, please email us at
[e-mail] or call us at 866-896-5747

PARTS (included)
Body 1½” Bolts (2)
Ground Stakes (2)
Square Drive Bit (1)
TOOLS NEEDED
Screw gun
Phillips Head Screwdriver
Hammer
Head
Cap
b
a
c
HARDWARE (included)
photo 1 photo 2
photo 3 photo 4
a
a
STEP 2
Set the lighthouse body upright &
place the head on top, aligning
the predrilled holes inside the
head with the threaded inserts in
the top of the body. (See photo 3.)
Insert the 1½” bolts in the
predrilled holes inside the head.
(See photo 4.) Using the phillips
head screwdriver turn the bolts
into the threaded inserts & tight-
en.
STEP 3
Place the cap on top of the
head. (See photo 5.) Take the
lighthouse to the desired location
& pound in the 2 ground stakes
in the predrilled holes in the
base ring. (See photo 6.) If your
lighthouse included the optional
solar light kit, refer to the
operating instructions enclosed
with it.
photo 5
STEP 1
Remove the four screws at the
ends of the shipping strips to
unfasten from the lighthouse
body. (See photo 1.) Pull the
head out of the lighthouse.
Remove the shipping strips
from the head & discard. (See
photo 2.)
photo 6
b