Abble 300527 User manual

Thanks for choosing Abble Inc products. We'd love to hear your thoughts,
and so would other customers. If you are satisfied with our products and
service, please let us know. If you have questions or feedback, we're here
to help! [email protected].
(We will reply you within 24 business hours) www.abblestore.com
Assembly Instruction
300527-Upholstered Bar Stools(set of 2)
Part List
No. Description Diagram Qty
pcs
A
B
C
D
E
F
G
H
Dowel
Hareware
No. Description Diagram Qty
pcs
1
1
1
1
1
1
1
Backrest
Seat Frame
Front Legs
(Left)
Front Legs
(Right)
Side stretcher
(Left)
Side stretcher
(Front)
Side stretcher
(Right)
1
2
3
4
5
6
7
1
2
4
4
10
10
1
6
Short Bolt
Middle Bolt
Long Bolt
Flat Washer
Spring Washer
Allen Key
Selftapping
Screw
10*30
5/16*57mm
5/16*52mm
5/16*90mm
5/16
5/16
M5
8*45
P
lease check that you have all the parts listed before you start assembling,if you do fin
d
t
hat something is missing,do not continue assembly,please contact us immediately.
N
OTE:Please do not completely tighten all the hardware until the entire assembly i
s
complete!

Step 1 Step 2
Step 3 Step 4
Step 5
Stick the dowel(A) in the seat frame(2)
Open the velcro strips on the edge of the seat frame,
attach the seat frame (2) to the backrest (1), using the
allen key (G) to fully fasten 6pcs bolt (B and D), 6pcs
flat washer (E) and 6pcs spring washer (F).
Secure with 6pcs selftapping screw(H) as showed in above figure. Note: If you have
trouble inserting the strechers , loosen the bolts slightly to allow for extra space.Turn
stool upright on its legs and place on a flat,level floor, make sure that the stool is
level and square. Tighten all the bolts completely with Allen key(G).
Insert the side strechers(5) and (7) as showed in
above figure.
Using the allen key(G) to fasten 4pcs bolt(C) and
4pcs flat washer(E)and 4pcs spring washer(F).