Abram's Nation The Safety Sleeper Manual

[phone] | [e-mail] | safetysleeper.com
V2.5 Updated: 05/18/2021
Patent: US 7,971,596 B2
Assembly & User Manual
WARNINGS!
Always follow assembly instructions Coverlet safety sheet must be used at
all times to prevent entrapment
Only use the recommended size
mattress: see technical specs
Maximum weight (occupant) : single
450lb/204kg

1..........................................
2...........................................................................................
3...........................................................................................
4...............................................................
5................................................................
6......................................................
7......................................................
8.......................................
9.......................................
10..................................................
11...................................................
12..................................................................
13..............
14............................................................................
15......................................................................................
16.....................................
17.................................................................
[phone] | [e-mail] | safetysleeper.com
TABLE OF CONTENTS
Washing and Handling Instructions
Disclaimer
Disclaimer
Technical Specifications
Technical Specifications
Assemble Twin/Single Frame
Assemble Twin/Single Frame
Assemble Full/Double/Queen Frame
Assemble Full/Double/Queen Frame
Attaching Enclosure to Frame
Attaching Enclosure to Frame
Inserting the Mattress
Adding and Removing the Coverlet Safety Sheet
Suitcase Packing
Air Mattress
Regulations and Testing Compliance
Important Information

Do not use fabric softener
[phone] | [e-mail] | safetysleeper.com 1
WASHING & HANDLING INSTRUCTIONS
WASHING INSTRUCTIONS
Wash cold or warm on gentle
Machine wash on delicate cycle in either a front loading washing
machine or a top-loading machine without a center agitator. Use
only laundry detergent and/or vinegar. All zippers must be
closed before washing. Entire enclosure, frame pads, and
coverlet safety sheet can be washed.
Use vinegar
DRYING INSTRUCTIONS
Tumble dry The Safety Sleeper® on low heat, or line dry.
Dry on low heat
Dry on gentle
Line dry
Do not iron
Use laundry detergent
Find The Safety Sleeper® instructional
videos on assembly and care at:
safetysleeper.com/pages/assembly
Or scan the QR Code.
PRIOR TO USE WASH THE ENCLOSURE AND COVERLET
SAFETY SHEETS.
Do not bleach
Do not dry clean

[phone] | [e-mail] | safetysleeper.com 2
DISCLAIMER
RECOMMENDED USE
For proper use, care and assembly, all instructions must be
specically adhered to. Wash before rst use of this product. Bed
is not intended for use as a toy, play equipment or as a disciplinary
device. Recommended for ages 3 and up.
ENTRAPMENT HAZARD
Pillows, blankets, and stu󰀨ed animals to be used at caregiver’s
discretion. Coverlet safefy sheet must be used at all times to
reduce the risk of serious injury from entrapment between the
mattress and bed enclosure.
Abram’s Nation is not responsible for any accidents or injuries
that could occur if this product is used for purposes not
intended.

[phone] | [e-mail] | safetysleeper.com 3
DISCLAIMER
Read and follow instructions before assembly and use.
Save this manual for future reference. If you do not have
instructions, do not use this product. Contact Abram’s Nation
at [e-mail],[phone] or visit
www.safetysleeper.com
PROPER USE
• Periodically inspect enclosure (wear, tear, loose stitching, and
zippers) and frame (worn, bent, broken frame pieces and/or spring
pins) for any damage that could compromise the safe usage of the
product. If there is signicant damage please contact our customer
support to start the repair process.
• In order to reduce the risk of tipping, use provided stabilizing
straps to secure the enclosure and frame to the underlying standard
wooden or metal bed frame (not included).
• Ensure your in-home mattress (when applicable) meets safety
guidelines (https://sleepproducts.org/advocacy/federal-mattress-
regulations/).
IMPROPER USE
• Do not use the The Safety Sleeper® if any parts are missing
or broken. Contact Abram’s Nation for replacement parts and
instructional literature if needed.
• Do not substitute parts.
• Do not alter the enclosure. Repairs should only be done by
Abram’s Nation or authorized distributors. Contact Abram’s Nation
for more information.
• Do not climb on top of the enclosure.

[phone] | [e-mail] | safetysleeper.com 4
107.25cm/42.23”
188cm/74”
TECHNICAL SPECIFICATIONS
Size Length Width
US Twin
EU Single
AU Single
107.32cm/42.25”
107.25cm/42.23”
107.25cm/42.23”
189.23cm/74.5”
200cm/78.75”
188cm/74”
105.41cm/41.5”
97.8cm/38.5”
99.7cm/39.25”
EXTERIOR OVERALL DIMENSIONS
US Full
EU Double
AU Double
107.25cm/42.23”
189.23cm/74.5”
200cm/78.75”
143.51cm/56.5”
147.8cm/51.8”
146cm/57.5”
US Queen 107.32cm/44.25”
201.93cm/79.5” 158.75cm/62.5”
UK Single 107.25cm/42.23”
189.2cm/74.5” 97.8cm/38.5”
UK Double 143.5cm/56.5”
US Twin XL 201.93cm/79.5” 105.41cm/41.5”
MATTRESS DIMENSIONS
Size Height
Length Width
US Twin
EU Single
AU Single
20.5-25.5cm/8-10”
19-24cm/7.5-9.5”
189.23cm/74.5”
200cm/ 78.74”
188cm/74”
96.52/38”
90cm/35.43”
92cm/36.22”
US Full
EU Double
AU Double
19-24cm/7.5-9.5”
189.23cm/74.5”
200cm/ 78.74”
188cm/74”
134.62cm/53”
140cm/55.12”
138cm/54.33”
US Queen 203.2cm/80” 149.86cm/59”
UK Single 190cm/74.8” 90cm/35.43”
UK Double 190cm/74.8” 135cm/ 53.15”
US Twin XL 201.93cm/79.5” 96.52cm/38”
107.25cm/42.23”
189.2cm/74.5”
112.40cm/44.25”
Height
107.32cm/42.25”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”
20.5-25.5cm/8-10”

[phone] | [e-mail] | safetysleeper.com 5
OPERATING CONDITIONS
The Safety Sleeper® is designed for normal indoor conditions.
WEIGHT
Shipping: Total product weight with suitcase: under 50lbs/23kg
*excluding queen which is approximately 55lbs/25kg
Occupant maximum weight/load: 450 lbs (204 kg)
MATERIALS
Fabric & Mesh:100% Polyester Material Flame Resistant
Bias Binding: 50% Cotton/50% Polyester
Webbing: 100% Polypropylene
YKK Zippers
FRAME
Aluminum
Nylon
Stainless Steel
TECHNICAL SPECIFICATIONS

[phone] | [e-mail] | safetysleeper.com 6
Assembly videos also available at:
safetysleeper.com/pages/assembly
ASSEMBLE TWIN/SINGLE FRAME
STEP 3: Connect the B4 pieces to each other rst, then align
the B5 & B6 frame piece across from each other and connect to
their counterparts at the same time to ensure they snap together
properly.
STEP 1: Lay all six pieces labeled B1, B2, B3, B4, B5, B6 on the
ground with labels facing up.
STEP 2: Connect B1 to B1, B2 to B2, and B3 to B3 in numerical
order by pushing in button & sliding together until button clicks into
place.
B5 B5
B4
B4
B6 B6
B5 B5
B6 B6
B4

[phone] | [e-mail] | safetysleeper.com 7
ASSEMBLE TWIN/SINGLE FRAME
STEP 4: Lay out four top frame pieces labeled T1, T2, T3, then
connect by pushing in button and sliding together until button clicks
into place.
STEP 5: Repeat for second top support using pieces with T4, T5, T6.
STEP 6: Hold the T1-T3 vertically and line it up with the B2-B3 base
piece making sure support pieces are facing towards the center of the
frame and match the correct jaw slide (S1 to S1, S2 to S2). Line up
each connection point so that push pin/spring pin can slide through
and then ip push pin toggles to secure the top pieces to the base.
Secure the support pieces the same way. Repeat with the other side.
NOTE: To release the push pins, push the head of the pin, align the
toggle horizontally, and pull out.
Push Pin/
Spring Pin
Jaw Slide
T3 T3
T1
T1
T2 T2
T3
T1
T2
T5 T5
T4
T4
T6 T6
T4
T5
T6

[phone] | [e-mail] | safetysleeper.com 8
ASSEMBLE FULL/DOUBLE/QUEEN FRAME
STEP 1: Lay all eight pieces labeled B1, B2, B3, B4, B5, B6, B7, B8
on the ground with labels facing up.
STEP 2: Connect B1 to B1, B2 to B2, B3 to B3 and B4 to B4 in
numerical order by pushing in button & sliding together until button
clicks into place.
STEP 3: Connect the B5 to B5, B6 to B6, then align B7 and B8
frame pieces frame piece across from each other and connect to
their counterparts at the same time to ensure they snap together
properly.